Just gotten my m4e need to get a CPU
Ram also
Any recommended ram?
Looking at crucial pc3 16000 9-11-9-27 1.65v 256megx64
Ddr3 2000

hey~ owikh84~
i finish running p95 without any problem~
n here is some setting in my bios~ is thr any problem with that setting??
or do i need to change???
sry cos may pic n question~ im new to OC~ 

Any idea to get which jaw x?
1.65v vs 1.5v

---

Added on January 5, 2012, 8:39 pm

Any idea which is best? Some link to the model?
Staying at jb, mostly get part at sg or online

Btw I plan to use wb on ram too, possible?
Corsair gt? Is good?

Look ard review said is using by hynix chip for
http://aphnetworks.com/reviews/g_skill_rip...9d_8gbxld_2x4gb

So can't use hynix chip ram?
Crucial is running micron chip
Dominator gt is out of stock in sg, how about my?
Who selling?

Target to get 2x4g 1866-2133
G skill should be good too, lifetime warranty from sg local distro below 200sgd
Just got my p67 m4e
Now looking for i72600k or i7 2700k
Any seller to look for???
Pm clawhammer
He dun have stock already
Pp playing x79 now while I am on budget
Wc burn money ...

Then I would prefer to take rip jaw x at 2133 pc3 17000
Saw it at 175 sgd no show what cl, saw cl11 at 149

Finally settled, hunting for i726k now
Where to get best price in jb??

Thanks man
2133 cl9 2x4g sgd 155
2133cl11 4x4g sgd 250
Was thinking to get either one
Do we really need 16g?
4 stick harder to oc?
Maybe hunt the chip tomorrow or Sunday
Best at lowyat is 880, which I know...
Not sure jb got any price close with that ...
Thanks for the advice

thanks for the advice, targeting to buy that
is the 1.65v wil affect oc of i72600k?

I have a Maximus IV Gene Z68, i5 2500K, 2x 4GB 1333MHz Corsair Vengeance (9-9-9-9-24). Auto tuned to 4.4GHz with 1.38v, it's unstable. Tried with bios EZ profile at 4.6GHz with 1.35v, also unstable. Right now running at 4.2GHz but I have yet to stress test it (not at home right now).

What could be the problem of the unstable OC? I thought 1.35v is more than enough for those speed. During BSOD I recall reading somewhere about clock speed error.

Or could it just be my PSU? But it's a 750w Strider 80+ silver and I only have one HD6950 in the rig.

hi guys 
At what level should i run IBT and LinX stress test in order to say my overclock is satisfactorily stable ?
Standard, High, Very High or maximum?

It seems i cant complete more than very high level (>4Gig Memory usage)...Its require extra voltage and produced more heat....

anyone experience with corsair PSU, the fan is so noisy.

Just had a quick OC run with my rig

i5 2500K 5.0 GHz  [1.45V Vcore in BIOS,Internal PLL Overvoltage Enabled]
MSI P67A-GD55
1X4GB Mushkin Value DDR3
CM 212 EVO Push/Pull

What do you guys think?Personally i'm having doubts at running my CPU using that much voltage

i'm back to 4.7GHz @ 1.30V in BIOS right now.About that run,i've already have SP1 installed .
One thing that's bugging me right now is that with LinX 0.64 [All RAM] i'm only getting around 94Gflops at 4.7GHz while i'm seeing people say that they can get 110Gflops~ at 4.5GHz.
What do you think would be the cause of this?Max temps are below 80c with this setting.

i found the problem of psu, there is a transparent plastic below the fan (near to the socket) to redirect the airflow, its vibrating , zzzzz

SEEM's this is the best setting i can get, because run all the stress test and it past..... but if anyone know anything (tips) for OC up to 5.0 and above give me a hint please
How to get 5.0ghz >.< what need to change (i mean other's from core volt)....     

I've tried with the Linx you posted on the first page and still i'm only getting around 98Gflops only.

Finally have the time to test my OC. Went for 4.2GHz on 1.3v, still not stable. Now running Prime95 with 4.6GHz on 1.4v, I hope it's stable. :s

Off topic; does expensive thermal paste are actually better? Any good thermal paste for recommendation?

hey guys just curious I am starve for single threaded or 2 threaded performance but I am not willing to go higher TDP for my 2500K since the performance of all 4 cores @ 3.3GHz is more than enough to feed my need, so I am sticking 4 cores @ 3.3, but OC in 1-2 core.

Can I leave anything to auto and just adjust the turbo for single and 2 core, even Vcore as auto, how is the vcore in Sandy work? will it increase if I leave it auto when I just adjust the turbo 1 active core @ 4.2Ghz/ dual core ~4GHz? because as far I as know most Sandy can run fair well <4.2GHz @ stock volt.

because previously on socket 775, if I leave it auto the Vcore will increase itself when I OC despite I stay within Stock voltage OC range.

System spec
Intel 2500K
Asus P67 Sabertooth B3
2x4GB Corsair Vengence 1600Mhz CL8 kit
Leaktek GTX570
80GB HDD + 1TB HDD
Xigmatek NRP-MC651 650W PSU

EDIT: besides Any idea how/what application to stress test individual cores? (single core/dual core/triple cores).

hey guys~
if my rig can run 10 intel burn test in (stress level - maximum) without any problem~ does it means stable???
cos i hv no time to run p95 for 24 hours~

how about now?? hv been running p95 for 8+hours~ now error~

---

Added on February 4, 2012, 9:37 amthan what is the best way yo test is it stable?

from my little experience, oc memory will give u bsod most of the time. So, it is better to stick to ori frequency for long run. So far i didnt face any BSOD on cpu ocing.

thanks for replying, so if I leave Vcore at auto will it go over the Intel spec? because as far as I know if it clock higher the Vcore go up as well.

Its not that I fear it will break on overvolt, since I do rather mild OC only, but more like I want power consumption stay max 95w only.

CPU Current Capability = 100% I leave it at 100% whats this thing?

I got aida64, and manage to use its build-in stress test each core, 2 core or 3 core.

My Report 
So far I only got turbo in these frequency without itself clocking back down, because if I go higher it will quickly clock back down after I stress a while.

1. 4GHz turbo when 1 core active.
2. 3.6GHz when 2 cores active.
3. 3.5GHz when 3 cores active.
4. 3.4Ghz when 4 cores active.

seems the turbo function are rather poor, if keep clocking down if I set too high.

Cooler is Hyper 212+ in a non air-cond room at 31c afternoon.

I've put a spoiler on the 2nd fan of the heatsink so that some air is directed to the VRM below and voila i've got 122GFlops on 4.5GHz.Looks like it really did overheat.Thanks for your help.

my casing can fit custom water cooling ? Lian Li PC-8FIB casing