All sifu, 78c full load count as safe? Under Hyper 212 Plus on 4.8 GHz...

Oh ok... 13/21 now, temp never exceed 88c still. I think I cant play with 5 GHz...

1.49 GHz?

---

Added on April 21, 2011, 5:08 pmWhat is "CPU I/O Voltage"?

as for VCCIO aka VTT, most of the time u wont need to adjust it at all @ 1.05v. U might need to increase it a lil bit when playing with higher RAM speed & tighten timings etc... Using over 1.2V should only be necessary if u're pushing the proc toward 5GHz +. Like one of my proc @ 5GHz needed at least 1.2v VTT to boot into windows. Using above 1.4v is not recommended at all - u have been warned!

owikh84, do u think daily use 4.9 GHz ok? Stress temp max 93C around.

i'm now stressing my cpu with linx. i saw in cpu-z my clock speed downclock to stock and back to oc sometime .....is tat normal?

tq bro. i'm now running 500 rounds linx to ensure the stability before oc higher, will turn off those features after tis test. can u tell me is my temp acceptable so far?

i try raise to 48x but it can't boot into window, stay at black screen with a '_' blinking...wat is the thing i need to reset?

Bro owikh, stock PLL is 1.8 and I lower to 1.65 is it ok?

no luck on 48x, vcore offset 1.4v, cpu ppl on but freeze after few rounds of linx...

---

Added on April 24, 2011, 3:45 pmlinx got error and stop...wat shud i do?

any msi user here?

somehow i felt that some setting (volt or subtimings) changed when i open the MSI control center.but not so sure.. im on latest bios

eg
after boot, all set in bios = memtest stable
then open MSI control center, memtest again without changing anything = memtest fail..

no.. i mean i can pass memtest..but without reboot, i open control center, then memtest fail..

RTL is important to set it manually? ok..will doo..thanks..

and besides the x-x-x-x-xT , what others that u usually set it manually?

u mean trfc?cant find tfrc here..
if trfc ,i always change in amd, but still blur need to change or not in intel.

i tested this few times..
after open control center, memtest will fail at around 40% ++ coverage.
if not, can pass 200%

1st i noticed is when i memtesting, then in order to get a ss, i open cc (while memtest running) and straight away prob found..
so ran again few times to verify..

i gave up on eco already.. bought cuz my previous kit was doing great.. on AMD tho..

now testing better but still a cheap ram

another thing sir..
the vccio thing.. is 1.25v a suitable volt for it? or that is above optimal volt?
i cant leave it at stock..system wont stable with that..thus i blindly push up to 1.2Xv
but somehow if i set at 1.15v, the oc will more stable compared to 1.2Xv

and again, i cant confirm this....maybe its other settings..but if u encounter the same, then ok la

edit : ah..sad, the link u posted, he manage to get i boot at 2133.. i cant even get a post..

Waa, again.
Passed LinX, but suddenly BSOD while surfing web.

just ram.. dont have luxury to change all

cant do it at 1.05vtt..
even if set new to 1.1v will crash..
still lot more to learn.. few masters i asked also said no need to increase vtt alot in sandy.. googled around also normally see around 1.1-1.15v only.. but i just cant do that.. user problem 
ok..updated my sig..

Bro owikh, I found out "Phrase Control" in bios. Now set "Intel SVID", should I need to disable it?

what is the lowest voltage i can put for cpu 2600k running on stock speed 3.4ghz? temporary 1.144v.

i dont think our mobo bios have offset value..
no, never randomly bsod unless i know that system gonna hang anytime..
but, i never oc my proc yet..so i donno yet if oc proc..later will oc it..
ic ic.. ahh.. hate weak imc. in intel, imc strength can detect by batch or not? or just random?