Already got rumors that Persona CPS will be launch after new Waja launch, which makes sense since the new Waja will have different/bigger engine so no market overlap.

Same here bro. Being told that we need to get those ABS sensors cleaned. Once that light appeared, ABS will not function.

My friend been driving his car (4g18) for more than 4 years with the lights on, no problem.

---

Added on August 26, 2010, 4:37 pmWhere u got it cleaned?

This post has been edited by sphiroth: Aug 26 2010, 04:37 PM

I don't think it is a good idea to do engine wash at shop.
1. they use high preesure water that may sips into unwanted places (fuse box, connectors, etc).
2. when you arrived there, the engine parts is still hot. Spray with cold water may create cracks.

Better still if that turbo unit can be plug n play into our CPS.

IMO, most probably Exora will get it 1st. One problem with Turbo is that 'some owner' () will try to squeezed up more power and when things went wrong, they will claimed for warranty. So Proton needs some method to track these 'mods'. Wait, maybe thats one of the things the new 32-bit ecu can do (data logging).

Just a late update, my muffler. (just got back my laptops from warranty claim)



And also latest addition to my family



This post has been edited by sphiroth: Aug 30 2010, 09:58 AM

The MC ver already got bodykit with only rm1k price difference.

AT, but M-Line. The only worthy thing with the H-Line IMO is the leather seats.

Its hard to conform to EURO4 standard with high revving engine, thus 1.6 with 125hp are already considered high. Most 1.6 is in 110hp region.

Honda will have a hard time especially with the new EURO5 standard because they don't have turbo engine. Most EURO4 engine usually have small displacement but complement it with turbo.

RM1025. Belt+3 bearings+2 brake pad+castrol edge fully synthetic+gear oil+brake oil+brake service+radiator flush+spark plug.

1pc is not much difference, but when times 4...

So far I've no problem getting my car serviced at SC except its located quite far (20km).

For me, the labour charge is quite reasonable. Got aircond waiting room + wifi + clean toilet. They also use blanket to cover the seats, and fenders to avoid scratch when they working on the engine.

The SC that I used to also allowed me to stand beside my car while they do their work.

For engine oil, as long as they got the brand I want, no problem. Expensive a bit but because of the 'flood' of imitation/fake engine oil nowadays, it better to be safe than sorry.

Which Waja? Campro or CPS or 4g18?

So quite these few days...maybe everyone in Raya mode already...

Yeah, I'm really tired these few days. The weather is hot here.

Anyway, survey for me price of 205/50/16 Yoko S,Drive tyres while you there.

This post has been edited by sphiroth: Sep 3 2010, 08:40 PM

PS3 thread is not 'aggressive' enough for my liking.

For RM250 price range, I will definitely go for it again.

---

Added on September 3, 2010, 9:24 pmHow much?

This post has been edited by sphiroth: Sep 3 2010, 09:24 PM

Falken Ziex-912. Softer than R1 thus better grip and quieter, but the threadwear is

I've start with standard conti comfort contact (4 hours)->yoko R1 (20k km before my tyres damaged by jammed rear brake)->falken 912 (30k km)->yoko r1 (currently 30k km and I'd say it can last another 30k km). I'd loved to change all 4 tyres at once.

But bear it mind most of the major performance upgrade done when I got that 912 fitted, so I drove hard back then, really hard (tyres screaming every time the traffic light turns green).

Just back from Zainul Nasi Kandar. Tapau for buka posa.

Front is closed but did you try to see the 'back door'?