better go buy the steering wrap from kedai abang.. more nicer.. cheap and like leather for the one they sell rm40.. the rm80 ones and above is real leather..

Nice demon eye but cant fit my waja

any1 knows if a headlamp can be fix if the beam adjuster (further/nearer) spoilt?

i really want to pasang HID kit but installer say no point installing if cannot adjust where the beam is pointed..
right now my right side headlight cannot adjust.. turn the screw on top of the headlight and nothing happens..

u have to remove the whole headlamp to fix... i mean dismantle the whole unit... better retrofit other projector..

if the new projector got its own adjuster then ok laa but what if its seperated like the adjuster is part of the lamp housing and not the projector?

hi guys, i am upgrading my anti roll bar(ARB), but i am not sure with what size to go with, 16mm or 19mm ?
some say 16 mm is enough some say 19mm for waja only enough cau waja is heavier compare to wira if use 16mm. thanks in advance ya.

I found this beautiful meter nice nice nice...

mfa: price is rm480. including retrofitting work + modifying ( smoke, open, wiring n etc) + installation. for waja la. for other car it depends on the headlamp and type of sealant. and dun forget put a switch if u put other than white or yellow color ring like me haha (in case of jpj )

wah mxsteven nice meter there. got many type of display..

This post has been edited by blo0dLuSt: Dec 24 2010, 10:59 AM

yea thats the one won in SEMA car show.... very nice product from TPP

stock for waja front is 16mm...belakang 12mm (if not wrong la.). wanna layan corner better change bigger . haha dun sure bout this oso.

btw wira and waja hav diffrent body characteristic. waja got front and rear arb as stock while wira only SE got stock front n rear ARB.

This post has been edited by blo0dLuSt: Dec 24 2010, 11:45 AM

yes i am going bigger just dont know wanna go till how big

by the way u r using stock bars? what i concern is put 19mm , will cau discomfort as the roads near my place got a lot of holes and bumps.

This post has been edited by tjroy: Dec 24 2010, 11:54 AM

yes i am using stock bar. i heard bigger is not always better. it increase stiffness and decrease comfort. haha. i think if u wanna change, front 19mm and rear 16mm is good enuf for cornering and comfort. i think if u change, u shud use oem spring and absorber. not sport one or u will not be comfortable., dun forget bush and spring also help u corner without sacrificing comfort. haha. ive checked the biggest u can go for ultra racing is 23mm rear. wah

This post has been edited by blo0dLuSt: Dec 24 2010, 12:19 PM

23mm is expensive and too tough for me dy later bush or things will koyak. front arb will not touch, only rear arb.

any other users upgraded thier rear arb?

but so far i nvr saw anyone sell front arb wor~

need custom made, waja got many things to uninstall and install back right? installation cost would cost a bomb dy.

any1 using petronas syntium fully synthetic engine oil?
i'm clearing my store so got some extra engine oil selling of cheaply..

2 litre of syntium 1000 left inside a 4L bottle.. full bottle cost around RM150.. this 2 litre i'll sell 4 rm40 only..

1 litre of syntium 3000 left inside a 4L bottle.. full bottle cost around 180.. selling this 1 litre for rm20 only..

any1 interested pls pm..

ok bro.. tq..

Haha..to little la bro..even mix oso have 3 litre..not enough for one engine..huhu

Nway bro have u tried new engine oil at Dori2?

if u have 3litre good enough ma..
just buy 1 litre bottle.. eon servis usually got sell 1 liter bottle.. i use to buy them when sending my waja there..

now since my neo already frequent dori2, my waja will start sending there too..
dori recommend for 5k interval or 8k interval service can use CITGO oils..
for 10k interval use castrol magnatec..

Hey guys wat colour fit waja the best? Going to respect it asap... Milky white? Roof black...