different case, mantis and goliathus are so thick i know
and mechanical keyboard weight is definitely different form membrane keyboard

some more qck only 2 mm thick

---

Added on November 2, 2010, 11:49 pmdifferent case, mantis and goliathus are so thick i know
and mechanical keyboard weight is definitely different form membrane keyboard

some more qck only 2 mm thick

---

Added on November 2, 2010, 11:50 pmyou like Ikari Laser but don like Ikari Optical??
Whats the problem?? sensor?? precision??

---

Added on November 2, 2010, 11:59 pmI think the tilted height shouldn't be a problem since qck's thickness only 2mm.
I don know how about the other, but for my case is like this. I using quite a big office table for my computer, then i put the monitor next to wall then my keyboard and mouse is next to the monitor as well. Therefore there is a very large distance from myself to the keyboard, i always rest both my arm on the table. The table's edge is like hurting my arm, so i put a cloth mat there always.
Then another 4 hd is on the cloth mat, some time when lazy means not sitting straight then will pull the mouse to the cloth mat.

Problem now is i feel uncomfortable to use the kinzu both on 4hd the goliathus, so plan to trade the goliathus for qck. Therefore i always using big size cloth mat for arm rest purpose lol
But qck+ width cant fit into original goliathus position then only i ask the question.
(hope you all can illustrate what i am talking about)

This post has been edited by jasmineivan: Nov 2 2010, 11:59 PM

If your statement totally correct i sure won't get the large one.
My table got lot of space to put it, but a particular corner can't only, maybe just 2cmx5cm at the top left corner. Compare the ratio to qck+ full size, this area just very very small portion only

Last time alpha goliathus size fit perfectly haiz

Anyway you reconsider whether wanna get Qck+, maybe just change the Kinzu's feet will be direct and fastest way to solve the problem.

if you go past few page and read what i ask then you will know why i say so.

Because my goliathus control cant let my kinzu skate nicely so planning to upgrade to Qck+. Because the Qck+ bit too big any normal Qck bit too small so i am think which 1 to get. If say get a set of kinzu's glide then can skate nicely on 4hd then i no need to get Qck+ also never mind.
Now you can illustrate how they are related??

I think will temporarily change my mind don't get Qck first.
Current plan is add the Kinzu's glide on it and then use it on Destructor for my lappie as an on-the-go mouse first.
It's smaller size is better in mobilize compare to my ikari and DA.

You just buy a new ikari optical?? Why not just get ikari laser from edifier??
With the cpi toggling, the too high or too low dpi problem will be solve.

Ikari optical should be plug and play and work well without need install anything. The original dpi setting is 400 and 1600 if i not mistaken.
At 1600 dpi and max sensitivity, the mouse should go almost out of control already, and it really moving very slow after you update the firmware, then most probably then problem is come from the mouse sensor. If really happen so, send for RMA asap is better choice. At least send back to the seller let them check for you.

---

Added on November 5, 2010, 2:14 amI think ikari optical need the cd much more than Ikari laser.

Ikari laser can do the cpi toggling just on the mouse and save it on onboard memory. I not really using the software for the dpi adjustment.
On other hand, ikari optical much more need it.

---

Added on November 5, 2010, 2:17 amFrom where you know this, don't think any 1 in ss thread know this.
Button 4, 5 not working?? Never heard this complain before as well.
It should be teflon feet like Ikari laser, skate nicely on most of the mouse mat.

This post has been edited by jasmineivan: Nov 5 2010, 02:17 AM

Think Kinzu and Xai only display in moderno.
Most of lyp shop only displaying Razer Logitech and Microsoft gears.

I already owning Ikari laser and Kinzu, no point go there also since no Xai.

Or anybody know where is displaying Xai browsing unit??

Your gf knows about gaming mouse?
Not bad.

---

Added on November 9, 2010, 8:00 pmPity his gf, her present sold.

---

Added on November 9, 2010, 8:01 pmDon't phyco people to change gf la ^^

This post has been edited by jasmineivan: Nov 9 2010, 08:01 PM

Agreed, just got my Kinzu few weeks ago.
Owning a Kinzu and a Ikari laser right now, will get Xai in the future as well (maybe after sell away my DA)

---

Added on November 10, 2010, 2:40 amSmart consumer, if no place for the big wrist support, better go for BW ultimate.
Almost same price with 6Gv2 but with extra feature.

After all, do you need to try it out before you get it? They 2 different switches which will give 2 totally different type of typing experience.

This post has been edited by jasmineivan: Nov 10 2010, 02:40 AM

Extra discount compare to Edifier's price?? Then must go there and have a look.

But even though yes go there also don't know buy what, no extra cash for new gear now.

yalor, thats why nothing much selling there also.
Ikari optical, 7G, Kinzu, all out of stock, go there also windowshopping only.

7H? Megalodon? Not sure whether it bundled with SC.
If really wanna nice effect, go for audiophile then.

Now other than audiophile.
My favourite headset is megalodon and kave.
Not really because of the performance but they really look great.

I prefer leatherette ear cup cushion. I found those old style cushion is gathering heat at my ear for long period usage.

7H keyboard?
Won't have 7G there la, out of stock long long time ago.

I think what you saw is SS Shift.
7G of edifier clearance sales is out of stock. 6Gv2 is out of stock before edifier start clearance sales, even earlier.

See your avatar also know you are Steelseries loyal support.