Hi vickyrao,

Yes, RT-N66U able to support Maxis Fiber Home Internet Service.

Thank you

Hi vickyrao,

No, currently cannot fully support yet.

Thank you

Hi natzakaria.

If you update it from the firmware version version 3.0.0.4.374.720 then you no need to do the setting, if lower than the version then you need to do a factory reset and redo the setting.

Thank you

Hi Ahmaz,

Yes, the RT-N16 able to support UNIFI + HyppTV.

Thank you

Hi joeboto,

Try to follow the guide from the below and see it work or not.

http://support.asus.com/Search/KDetail.asp...7B61ABE1D7D&t=2

Thank you.

Hi

Below is the link that show a list of supported printer for this router.

But still you can have a try by following the youtube below. Remember to install the printer driver on the notebook or PC that you want to use.

https://www.youtube.com/watch?v=neFK-I_G90w...189AA94E890048B

Thank you

Hi natzakaria,

Here is the link where you can download the new firmware.

http://www.asus.com/Networking/RTN66U/#support

Thank you

Hi IceBikers,

The models below are able to support UNIFI and has multiple SSID. But unable to control the bandwidth of the multiple SSID.

RT-AC66U
RT-N66U
RT-N65U
RT-N53
RT-N15U
RT-N14U
RT-N12HP
RT-N12 D1

Thank you

Hi chewyf,

Have you try update the firmware to the latest? The newest version is 3.0.0.4.372.

Is all the LAN port 1-3 also having the same problem?

http://www.asus.com/Networking/RTN14U/#support

Thank you

Hi hellboy180,

Want to ask, is the DSL light on the modem on or off or blinking when the disconnection happen.?

HUAWEI HG655b
On - The DSL connection is established and activated.
Blinking - The DSL connection is being activated.
Off - The HG655b is powered off or faulty.

ZTE ZXDSL 931DII
Slow Flash - The MODEM is in the non-communication status
Fast Flash - The MODEM is trying to be in the activation status
On - The WAN port is in the communication status

Do send me a copy of your log and your setting file to let use check.

I will pm you my e-mail address.

Thank you

Hi Madgeiser,

You can have a look at the youtube link below on how to setup the UNIFI.

https://www.youtube.com/watch?v=Y7VUBSFy_es

Thank you

Hi tancyew,

Due to our routers don't have the phone port for the VOIP, so will need the Thomson together to make it work.

Thank you

Hi wengjoe,

This RT-N12HP is a stand alone router. You will need to pair it with the BTU.

Yes the setting are correct.

Thank you

Hi gkong3,

What you mean is, you want to make the RT-N16 as an access point?

Thank you

This post has been edited by ASUSmy: Nov 22 2013, 05:29 PM

Hi gkong3,

May I know you want to use this for the UNIFI or Maxis Fibre Internet package?

Thank you

Hi gkong3,

If for Maxis Fiber, currently we unable to fully support the IPTV yet. And as for the HUB or switch, yes you can use it for other device such as NAS and PC.

Thank you

Hi Khalid21,

I have asked our RD, although our spec stated is 300Mbps, the 5Ghz is able to go up until 450Mbps.

So no problem on the data rate, it is normal.

Thank you

Hi theng_ye,

You can try do factory reset on the RT-N66U and try again. Below is the image where you can find the reset button.

Press at least 5sec and the power LED light will blink and then release. If it is successful, redo all the setting manually.

If you are still unable to log in, try restore the firmware using the firmware restoration tools. Below is the link to the step and video on how to do so.

https://www.youtube.com/watch?v=HIoQ5Qd11pU

http://www.asus.com/support/Knowledge-Deta...D-A6AF15E8B447/

Thank you


Attached thumbnail(s)

Hi schizophreak,

Due to Maxis and Astro doesn't want to provide information on the connection and our RD has less technical information the setup also. Currently is waiting our RD to provide solution to us.

Sorry for the waiting.

Thank you

Hi melvinliew1999,

May I know what capacity of HDD you are using, the disk format and the brands.

Below is the link for the supported HDD capacity and the disk format.

http://event.asus.com/2009/networks/disksupport/

Thank you