Nice. I didn't know the last pcie slot can still fit a card. Now that I looked carefully, it seems that's possible!

a)  res > pump > CPU >radiator >res
b) res > pump > radiator > cpu > res
which one is better? after sketching, i think b) give better tubing distribution.
any input?

Nah it's not exactly the same. B would be "slightly" better. This whole water reaching equilibrium thing has been misunderstood. The water will hit equilibrium in due time, but there will still be hot and cold spots in the loop. B is better since pump's heat would be reduced before hitting the CPU. Since it also gives you better tubing route, it's a no brainer not to go with B.

---

Added on September 11, 2011, 11:23 pmOh there's still one issue with putting a card on the last slot, you pretty much have to drain the whole system to remove that card if anything goes wrong.

In the picture it looks really tight, you sure there's enough clearance to remove it? If that's confirmed, I'd find ways to make use of the slot

looking for a bench tat can mount tri radiator. Any intro. lolx

any other test bench available? kinda interesting

ahh,our wc bro from oversea...may be u can enlighten us the purpose of the tube inside the multioption res

nice setup bro    

leak test while waiting for gpu block, lolx

You need a Corsair 800D. Buy mine so I can get an XSPC tower
Nah. The pressure can be controller.

if control the pressure the dust will not come out lorrr still stuck in between 

my xspc rad, brand new got 2 lubang no screw threads. I need to tap it manually. fcuk

the seller phone off. Called many times   

---

Added on September 16, 2011, 6:36 pmbut the paint abit rough thoroughly, need use olay to smooth it. lolx

Nah, XSPC H2 is a full aluminum tower, not made of steel. Consider it a Lian Li WC tower. However my experience with Lian Li/Aluminium is that it's extremely hard to avoid finger print, and also grease from permanently stuck on the casing. It's also rather noisy due to the very light weight. Everything seems to resonate the casing.
Thanks! 6990 in the works (or maybe 7 series equivalent if I wait a little longer) I need a new power supply. I may be bringing in some killer sh1t that's not available in Msia

from where u get it? i need another 12pcs for pull setup. XSPC abit mean in giving screws. 12pc only from the box.

Nah 6990 (450W) + 69x0 (300W) + 69x0 (300W) + Oced CPU (1x0W) = Dissaster waiting to happen on load. I'm even selling my UPS to get a 1500VA UPS because my APC Powerchute keep popping up with a notification telling me that my rig is drawing more power than the battery can provide on a shortage.

I don't want Corsair PSU anymore, there's something better out there

http://www.lelong.com.my/hex-socket-cap-he...7-01-Sale-I.htm
30mm m4 screw RM1 each. lolx

+1
not to discourage u bro,y dont u buy kaka's radiator and add to ur loop(or borrow ) and see whether the investment is worth it...

if i had compression fittings(easier to pull the tubing out of a wc parts), i might show the effect of adding another rad(using 2 rite now,just because i can is my excuse )

i've tried using water from the tap for 3 months bro...so far, it is okay, but i'm not sure what will happen further..

So I can ask recommendations from you guys ah?

Feel free to discuss about water cooling too

Finally the block arrived, thanks to JIBEK.

---

Added on September 27, 2011, 4:29 pmEK VGA HF uni block quite limited space for putting two compression, so i have to use normal fitting with locker. zzz

---

Added on September 27, 2011, 4:30 pmmax temp is 40'c while the stock heatsink temp is 76'c on giga 460 1gb.lolx

http://www.xs-pc.com/products/waterblocks/...terblock-intel/

http://www.xs-pc.com/products/waterblocks/...waterblock-amd/

new block from xspc. review looks promising. the amd mount looks really nice. hopeful that apes will bring this in.