hei guys,
can i know how much is saga battery??
tat 27k saga model

my battery is dead this morning @_@"

I don see any different by just replace new tension bush with others material bush. Or you means the tyre support more strength after replace new bush?

The original rubber bushing is much more softer compare with the Teflon material. As for lowered cars like mine, the rubber bushing will get damage and deformed in short period bcuz of the front anti-roll bar is pressing against it.

Me and catacombs tried replacing it with harder material (Teflon) and so far, its still holding on. The front ARB becomes slightly stiffer hence, less body roll when u dive into corners (depending on your tires) and a slightly bumpier front end (depending on your suspension setup).

There are a few SagaIswara track cars that are using solid piece of washers/spacers for the satay link as the bushing replacement which I think it is not suitable for daily driving, dats why we decided to try out Teflon material instead. No doubt Teflon material are solid hard as a rock... but under heavy load it will still deform abit and still got sum freeplay.

Yup, in the pic above u can notice I park the car 1 side higher thn the other and the tire is taking most of the load on the car.

How much for this teflon tension bush? I'm interesting with it.

dowan source from u ah
i source from catacomb

---

Added on January 19, 2011, 1:00 pmif ur is ns60L is rm150 for delco brand dry cell
leko brand is for 160 dry cell
century dry cell rm175
capalang useless rubbish mf calcium brand dry cell made in korea rm130
if u prefer wet one minus 20 buck from the dry cell
spare part shop price

---

Added on January 19, 2011, 1:02 pmy ah this morning i kentut not smooth the feeling ah ???????

This post has been edited by sinister_sid: Jan 19 2011, 01:02 PM

UGPM

Nobody is forcing u....

how fast is a VS will show it advantages? after install for hours or instantly? install zaptor but it seems like no improvement or maybe slightly with not noticeable? or with grounding only more noticeable?

I duno why the seller in this forum duwan response regarding the rubber seal door.
So now I damn dulan adi.
I will fix this instead on my door molo


Hope it works la

This post has been edited by heavenly91: Jan 19 2011, 11:47 PM

Guys,i have install a vacuum meter and i'm getting strange reading with the air con on(compressor kick in) the value is like 8 only while ac off and ac on(compressor haven kick in) its about 23

is there something wrong with my AC system?

o rly??


i will post pic mine tmr.......btw my normal reading is 20 in.hg
when air-cond comp. kick in....it show 18-17 in.hg....

---

Added on January 20, 2011, 2:34 amthat other method to tighten the door is adjust the hook actuator....that have two screw.......unthighthen the screw and move it inward and tighten the screw back....

and one more.....make sure the hook is have rubber that cover the hook...

---

Added on January 20, 2011, 2:40 amur VS how many capacity/FARAD??

This post has been edited by GMS FearLess: Jan 20 2011, 02:40 AM

good stuff...

below rm150 can setel la...



come come.. i also got sell... siapa mau PM me...

should be immediately...

u pasang correct vacuum line or not??...

skwed imitation kot ....

i think correct,i connect it to da box near the firewall thr



This post has been edited by Chan320: Jan 20 2011, 09:42 AM

hehe dunno u got
source from catacomb d

---

Added on January 20, 2011, 11:10 amu plug wrong vacuum line izit ???

---

Added on January 20, 2011, 11:11 amhow old ur car ?????

This post has been edited by sinister_sid: Jan 20 2011, 11:11 AM

I'm not sure,i plug in to the black box near the firewall there,where should it be connected?

u got put those fuel saver air intake ka ???/

yea,those magnet type on the fuel line only

hmmmmm
check the line see got leak anot
make sure everything thight
cannot be such low reading 1

Bro,can let me know how many vacuum hose other than the black box one?
will check it out later thanks