Outline ·
[ Standard ] ·
Linear+
LYN Proton Saga/Iswara Drivers' Forum! V22, For all those SagaIswara Enthusiast
|
GuestX8
|
Dec 21 2010, 09:38 AM
|
Getting Started

|
Hi,
I need the advice of all the sifu here. I have a 3 year old iswara and when accelerating (changing from 3rd to 4th gear and the tachometer reaching 2500RPM beyond that there is no sound) and up a slight slope there is a high pitched sound. It is definately coming from the engine compartment. There is no sound when the car is idle and I ram the accelerator from 1000RPM to 3000RPM. I have tried with the Radio on or off and also aircon on or off but the sound will come on around 2500RPM and goes off beyond that.
What would be the problem? Thanks.
Regards.
This post has been edited by GuestX8: Dec 21 2010, 09:39 AM
|
|
|
|
|
|
Sphenix
|
Dec 21 2010, 10:58 AM
|
|
yeah.......... the relay change @ RM25 .....now signal is back is the price reasonable?
|
|
|
|
|
|
sinister_sid
|
Dec 21 2010, 11:57 AM
|
New Member
|
QUOTE(GuestX8 @ Dec 21 2010, 09:38 AM) Hi, I need the advice of all the sifu here. I have a 3 year old iswara and when accelerating (changing from 3rd to 4th gear and the tachometer reaching 2500RPM beyond that there is no sound) and up a slight slope there is a high pitched sound. It is definately coming from the engine compartment. There is no sound when the car is idle and I ram the accelerator from 1000RPM to 3000RPM. I have tried with the Radio on or off and also aircon on or off but the sound will come on around 2500RPM and goes off beyond that. What would be the problem? Thanks. Regards. tensioning bearing try use wd40 spay if no sound the thing kong d u find the air cond cpompressor and look there a round thing that hold the belt This post has been edited by sinister_sid: Dec 21 2010, 11:58 AM
|
|
|
|
|
|
GuestX8
|
Dec 21 2010, 12:06 PM
|
Getting Started

|
QUOTE(sinister_sid @ Dec 21 2010, 11:57 AM) tensioning bearing try use wd40 spay if no sound the thing kong d u find the air cond cpompressor and look there a round thing that hold the belt Hi, Thanks, will try that later. BTW How much will it cost to get it replaced. Should I just replace all the belts? Any good recommendation on what brand to use. Thanks. Regards.
|
|
|
|
|
|
GMS FearLess
|
Dec 21 2010, 01:25 PM
|
Getting Started

|
QUOTE(Sphenix @ Dec 21 2010, 10:58 AM) yeah.......... the relay change @ RM25 .....now signal is back is the price reasonable? that ok lor...sometime have fakap@fucuk workshop/accesorry shop charge 45-50 bux just for the relay..
|
|
|
|
|
|
sinister_sid
|
Dec 21 2010, 01:47 PM
|
New Member
|
QUOTE(GuestX8 @ Dec 21 2010, 12:06 PM) Hi, Thanks, will try that later. BTW How much will it cost to get it replaced. Should I just replace all the belts? Any good recommendation on what brand to use. Thanks. Regards. how many milage urs ???? if near 80k then change timing belt time change with it price i dunno wor ask sifu sifu i olso want change but i think not more than 50 buck
|
|
|
|
|
|
GuestX8
|
Dec 21 2010, 03:35 PM
|
Getting Started

|
QUOTE(sinister_sid @ Dec 21 2010, 01:47 PM) how many milage urs ???? if near 80k then change timing belt time change with it price i dunno wor ask sifu sifu i olso want change but i think not more than 50 buck Hi, My mileage is only 42K. I hope that I do not need have to spend more than necessary. Regards.
|
|
|
|
|
|
GMS FearLess
|
Dec 21 2010, 03:48 PM
|
Getting Started

|
QUOTE(sinister_sid @ Dec 21 2010, 01:47 PM) how many milage urs ???? if near 80k then change timing belt time change with it price i dunno wor ask sifu sifu i olso want change but i think not more than 50 buck aiyoh....i can change 4 you..you buy the item....i change....duit kopi...ehem2....
|
|
|
|
|
|
the_catacombs
|
Dec 21 2010, 04:35 PM
|
|
relay not less den 10bux one meh??... go spare part shop buy and fix urself laa...
|
|
|
|
|
|
sinister_sid
|
Dec 22 2010, 09:20 AM
|
New Member
|
yesterday just brought the stupid tensioning bearing every morning like porn star on climax only cost rm12 but this morning when trying to change it the stupid old bearing cannot pry out any sifu know how ???? and lucky the bearing wont came out the sparepart shop give me wrong size Attached thumbnail(s)
|
|
|
|
|
|
anderson1188
|
Dec 22 2010, 10:29 AM
|
|
err last i saw my unker mechanic open just use the clipper to clip of the thing then can knock it out oh..but don't know la..noob in this kind of thing...
|
|
|
|
|
|
Gilbert5107
|
Dec 22 2010, 11:30 AM
|
|
who wan to change abs n lowerd spring? spring n absorber i seling off RM200. COD only.
|
|
|
|
|
|
sinister_sid
|
Dec 22 2010, 11:43 AM
|
New Member
|
QUOTE(anderson1188 @ Dec 22 2010, 10:29 AM) err last i saw my unker mechanic open just use the clipper to clip of the thing then can knock it out oh..but don't know la..noob in this kind of thing... ya i remove the pin d the pin olso a b**** i ketuk 1 morning olso cannot come out wait i go exchange correct size 1st try again Added on December 22, 2010, 11:43 amQUOTE(Gilbert5107 @ Dec 22 2010, 11:30 AM) who wan to change abs n lowerd spring? spring n absorber i seling off RM200. COD only. whole set ? wah want sell ur pride d ah ???? This post has been edited by sinister_sid: Dec 22 2010, 11:43 AM
|
|
|
|
|
|
yewwing
|
Dec 22 2010, 11:45 AM
|
|
QUOTE(Gilbert5107 @ Dec 22 2010, 11:30 AM) who wan to change abs n lowerd spring? spring n absorber i seling off RM200. COD only. ppl going for adjustable dy..damn rich
|
|
|
|
|
|
wkho555
|
Dec 22 2010, 12:56 PM
|
|
a mech told me to bypass radiator fan so that when car start the fan start and adjust a hose for better water flow. any1 know wat is it for?
|
|
|
|
|
|
Gilbert5107
|
Dec 22 2010, 12:59 PM
|
|
QUOTE(yewwing @ Dec 22 2010, 11:45 AM) ppl going for adjustable dy..damn rich  change others edi adjustable in other car....
|
|
|
|
|
|
wkho555
|
Dec 22 2010, 01:01 PM
|
|
QUOTE(Gilbert5107 @ Dec 22 2010, 11:30 AM) who wan to change abs n lowerd spring? spring n absorber i seling off RM200. COD only. whole set i wan i wan
|
|
|
|
|
|
Gilbert5107
|
Dec 22 2010, 01:05 PM
|
|
QUOTE(wkho555 @ Dec 22 2010, 01:01 PM) u confirm wan my PRO RIDE sport abs n spring? anda berani? no leaking
|
|
|
|
|
|
wkho555
|
Dec 22 2010, 02:33 PM
|
|
QUOTE(Gilbert5107 @ Dec 22 2010, 01:05 PM) u confirm wan my PRO RIDE sport abs n spring? anda berani? no leaking 15 inch will hit fender or not o
|
|
|
|
|
|
Gilbert5107
|
Dec 22 2010, 03:13 PM
|
|
QUOTE(wkho555 @ Dec 22 2010, 02:33 PM) 15 inch will hit fender or not o im using 15 inch.. u say leh  Added on December 22, 2010, 3:20 pmwho come who 1st ah... This post has been edited by Gilbert5107: Dec 22 2010, 03:20 PM
|
|
|
|
|