What the different between SSD and HDD?
All About Harddisk Thread V3, Discussion for Good Harddisk
|
|
 Nov 22 2011, 08:20 AM
Return to original view | Post
#1
|
 
Senior Member
6,765 posts Joined: Sep 2008 From: Kuala Terengganu 
|
|
Quote|
|
|
|
|
Dec 22 2011, 10:50 PM
Return to original view | Post
#2
|
|
Senior Member
6,765 posts Joined: Sep 2008 From: Kuala Terengganu
|
i wonder why my old IDE HDD can't be detect , i already buy the sata converter but my pc stil can't defect my old ide HDD =(
|
|
|
Dec 23 2011, 11:09 PM
Return to original view | Post
#3
|
|
Senior Member
6,765 posts Joined: Sep 2008 From: Kuala Terengganu
|
QUOTE(alvinfks78 @ Dec 23 2011, 10:42 PM) Had the same problem when i started using the sata converter. Basically i had to try many times try and error then luckily it worked. i will try it again Goggle it abit others have similiar problems also.   |
|
|
Dec 25 2011, 09:12 AM
Return to original view | Post
#4
|
|
Senior Member
6,765 posts Joined: Sep 2008 From: Kuala Terengganu
|
tested , Ok my Primary is SATA 3.0 HDD , then i plug out my IDE cable from DVD DISC direct to my old HDD IDE , when enter BIOS , it can detect that
IDE Primary: Idle IDE Secondary : Maxtor ......... SATA1 : Hitachi ............ but when boot into window , it show "NTLDR is missing" , izit my boot sequence wrongly? It should be boot SATA1 into Window and my IDE HDD should appear maybe E: F: G: ??? after i plug off the IDE HDD , then it boost normally to window  i did google some information , they say need to boot window CD and format the old HDD ??? This post has been edited by chongkiatz: Dec 25 2011, 09:13 AM |
|
|
Dec 25 2011, 01:32 PM
Return to original view | Post
#5
|
|
Senior Member
6,765 posts Joined: Sep 2008 From: Kuala Terengganu
|
That old hdd also got window os install (my old pc hdd)
I will try ur method tonight, maybe the boot sequen i set wrongly This post has been edited by chongkiatz: Dec 25 2011, 01:34 PM |
|
|
Dec 25 2011, 07:06 PM
Return to original view | Post
#6
|
|
Senior Member
6,765 posts Joined: Sep 2008 From: Kuala Terengganu
|
QUOTE(shinjite @ Dec 25 2011, 03:42 PM) Kind of at the wrong thread but that is DDR2 Tq for the information, never notice that the D2 is stand for ddr2KVR chips, what type of RAM will be stated in the label Saw the D2 there? That is the one, if DDR3 it will be D3 instead |
|
Topic ClosedOptions
|
| Change to: |  0.0411sec
 0.67
 7 queries
 GZIP Disabled
Time is now: 8th December 2025 - 09:46 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.