cm storm sniper?
1)Black all around including interior.  yes
2) Damn good airflow(200mm fan?)  yes
3)Dust filter(MUST HAVE!!)  yes
4)damn good cable management  yes
5)watercooling compliant.  yes

ya.. 3x1 3x1 2x1..
only one 3x1 long enough to reach my hdd bay, another 3x1 left two plug can be use. then 2x1 totally cannot reach dvd-rw.

I accidently rub off the paint on the letter V8.
Now its not shiny anymore.
How to restore this? It has an asthetic value to me.

ahhh,i wanna paint d interior of my cm 690...but so scared coz so not good with paint...
let it be or go with it???

zalman cnps 9500 look nicer.. now zalman very hot?
no need to change if it is working effectively and not hot on the top of heatsink.

or you can try venomous X or megahalem..
lz month I saw people selling megahalem between RM180-RM220 for a new set. 

my processor full load 4ghz on gaming 62-67c. yours can be cooler few celcius without hyper threading.

do you put a fan at the 5.25 bay? blowing to cpu.
base clock 190x21 or 200x20, vcore 1.28 and 1.33v.

http://valid.canardpc.com/show_oc.php?id=1078346

your rig almost same as the computer my friend setup last time, processor, mobo and ram.
result 4ghz i5 750 better than 4ghz i7 860 & i7 920 in linx.

venom looks quite big in storm scout, I can only put 1 fan at the bottom side panal of storm scout.

wish to do so but no $$

btw u know who got sell acyrlic ? mayb start saving now then change to Haf X mayb ?

I love its fluid dynamic bearing. 
but I never use b4, mind to let me know the result?

all of my 120mm fans start making noise for 60c above.
cm sickle flow, enermax magma and silverstone FN121.
not yet try my ADDA fan because it already noisy enough no matter what temperature it is. 

Here is my case with the hardware inside..i'm still suck at cable management..
Wish I bought a modular PSU instead..sakit mata tengok all those unused cacings..







And yes, it is Artic Cooling fans.
AC F12 series.
Only Advanced edition got that feature 

Yep. I got the fans from him 
What I do like from the exterior view of CM690 II, is that the design itself. It's not fancy with logos and so on.
Plain, simple and solid. That's my opinion though 

hey guys i'm new to this so i'll make it brief =)
was thinking about getting a CM Scout can my 5770 fit inside it?? and could i use 80mm fans instead of the 120mm ones?

btw...in comparison, how does the Thermal V5 or the NZXT Classic Gamma fair against Scout?

haha 80mm cheaper lol....
but is it heavy to lug around?? casing alone is wad? 8.7kg?? i think...
owh yea and how many fans does it come with??
i read reviews on it and it should come with 3 right???
front rear n top

here again my paliah rig.. use 4 month only finish da sidepanel <--- just to drill and put on the acrylic panels

P/S: Don't comment about the cacing lazy wan do it.... when i free only re-done everything then post some pic again TQ~!

was trying to remove the HDD bay in my cm 690 II plus case, when trying to remove the screws, some of them cant come it, bcoz some of then the "x" line on top of the heads hilang during the unscrewing process, now kenot use screwdriver to open some of it , any1 has any ide how i can still remove my hdd bay?

izzit cheap? where can i get those?

hi all,
proud owner of CM 690 II plus reporting in