I mean the arctic f12 used as front casing fan, not cpu fan~

Sysfan already occupied by rear fan~


Attached thumbnail(s)

I think my mobo got only 2 fan slots

Yeah, it is

One more thing, fan cable is too short if want to connect to mobo if got slot

Ill get an adapter tomorrow. Really Thanks bro for taking the time to answer my questions. Omg I m so noob

---

Added on June 17, 2012, 1:19 am

These are my arctic f12 pwm ports.

The middle one can't fit into my existing mobo port(which could work with my old CM fan)

See: http://static.lowyat.net/uploads/attach-26...-1339858293.jpg The black pin is the my f12 pin, shown in the pic on top on the right~

So what do you recommend? Get an adapter for the middle one or the right one? And adapter to which type?

Adepter to

http://farm8.staticflickr.com/7078/7380706...93cc7f334_b.jpg

or this:

http://farm8.staticflickr.com/7233/7380706...7abea35f5_b.jpg

This post has been edited by -kytz-: Jun 17 2012, 01:21 AM

Actually I just want the fan to work. That's all~ which adapter do you all recommend?

---

Added on June 17, 2012, 3:26 amIf I dun use the yellow wire means I cannot control the fan speed?

---

Added on June 17, 2012, 3:32 amWhat is pwm function actually? My mobo got only 1 slot for sysfan. I already attached the f12 to the rear fan occupying that sysfan port

Now want to get another f12 as front fan but dunno what adapter to get

Best if I can control fan speed. If not nevermind lah

This post has been edited by -kytz-: Jun 17 2012, 03:32 AM

The picture you provide, that port on top connect to middle or right port(picture below) ?



And what is the name of the converter?

Btw, I already connected my F12 to the sysfan slot

This post has been edited by -kytz-: Jun 17 2012, 05:39 AM

Thanks man. I just got myself an Aerocool Shark 140mm fan. Damn powerful! but slighly noisy hahaha. Comes with an adapter though!

Actually the Aerocool shark fan is damn noisy

The casing is the CM 690II Nvidia edition

Super desktop noob. Got my first desktop hardly a week ago. Just did some cable management today because the technician from Viewnet did a bad bad job

Before and After



Besides cable management, I also removed the HDD case for better airflow~

p/s: How to fix the rear fan cable? The cable there got 2 extra unused ports Macam mana fix?

Also how about the CPU fan and the yellow wire between the two fans?

Sifu sifu tolong tunjun ajar sikit

This post has been edited by -kytz-: Jun 19 2012, 08:19 PM

So guys, how to fix the rear fan cable problem ah. Messy

---

Added on June 19, 2012, 9:37 pmand the cpu fan too

This post has been edited by -kytz-: Jun 19 2012, 09:37 PM

Adjusted the rear fan cable. Better?

---

Added on June 19, 2012, 10:59 pmBtw the yellow and black cable there ah...possible to get an extension? If can I can go around like this lol:



This post has been edited by -kytz-: Jun 19 2012, 10:59 PM

Thanks bro. I'll see how first

Updated:

Sorry boss

^ Is that a Elite 311+ ?

Btw guys, how to minimize vibrations from my casing when I put it on my table next to me? Kinda annoying because previously I'm a laptop user so I don't get much of the vibrations and noise.

I've reduced the noise level already by adding 2 quiet fans and reducing fan speed for the GPU. Now it's pretty ok, but the vibrations level is kinda annoying

Any cheap alternative

Kennot lah, susah susah do cable management and casing got side windows somemore, where can put on floor

I have no idea where the vibration is coming from. Btw, my pc is still at the hospital, have to wait for it to be ready for collection before I can make any thorough inspections

Are you guys' casings have very little vibrations or close to none?

And one more question, can recommend any other red led fan that is silent and fast and has the exact same colour as my Aerocool Red Devil 140mm fan?

(the aerocool 12cm fan without the voltage reduction cable is noisy as hell, but with it the cable management is OMG horrible...especially on the rear fan)

Btw, wanna ask whether my CM Elite 311+ can have extra fan positioned next to the PSU like this?

http://static.lowyat.net/uploads/attach-39...-1338291673.jpg

Need more bling bling for my casing

There are no vents at the bottom. Just solid metal. I think it's kinda illogical to have a fan there blowing upwards since there are no ventilation holes at the bottom

Ok i found the cause of the vibrations: My HDD