nice cool blue

nice lighting bro... well done..

thanks

this LED sleeve is really nice but kinda troublesome to install. the adhesive on the fastener tend to come off unexpectedly when I tried to stick it on the required position. I had to buy a 3M double tape to make it stick effectively.

Elite 430 and V6GT user here. I feel like V6GT is tooo big with my GA H55 >.<

half way done...waiting for bulldozer, gpu and psu....
done spraying into black...but dunno how to maintain the coating...sprayed a layer of protective layer coating but...still paint kena scratch off...






anyone done 932 case mod? need some tips...thx
and how can i join this thread?

This post has been edited by lamjunrong: Apr 25 2011, 09:30 AM

if you don't want the paint to fall off, need to powder coat. haf932 is an awesome case. i've modded 2 haf932 before. one powder coat only. another one powder coat with bottom 120mm fanhole.

i'll try..but is powder coat paint expensive? i need to install another fan on the hdd cage...but dunno how...pin not fit

powder coating a haf932 + paint stripping only cost RM200. it's a bit expensive, yes. but the result is way better than spray paint.

sorry, i never had any request to add fan at the hdd cage

bro... mind to share where to get that powder coating?... i might need it for my HAF.. wanna paint the internal... thx

that bro does powdercoating services

haha..i already used like this..its cool rite?..but i just use same color..do u use 2 color or 1 color?..

---

Added on April 25, 2011, 6:51 pmhaha..hot rig u got there

This post has been edited by riedz90: Apr 25 2011, 06:51 PM

can refer to my signature

thanks dude

Has anyone managed to fit the V6GT into a USP100? cause i'm having problems closing up the side panel after installation

thanks bro.

btw I was thinking of stripping the plastic chrome and paint it black but not sure how to do or someone who can do it. I want my case to be all black.

haha..try ask otai2 modding la..maybe someone already do it..

Elite 360 and Geminii S user reporting in...cant resist to show off although nowhere near as cool as others here, hahaha....



thought using modular PSU can reduce cable management issue, turns out like hell...have to resort to crude measures...
having troubles installing the graphic card, just barely made it there with the size and power connector and all...also no idea to cool it down...running almost 80°C playing Dragon Age 2...
but CPU area is the best, and using the Geminii S means ur RAMs are covered too...

what u guys think?

If I'm not mistaken that 6870 is inherently hot and since u are using a htpc then it'll be hotter because since you oriented your case vertically, the bottom fan will be useless as there's no air coming in. try put the case horizontally or in the worst case scenario, sell off the 6870 and get something smaller like 5770 perhaps.

or you might consider getting a new case. there's a lot of CM cases that can provide better airflow & cooling than that.

This post has been edited by Oyaji: Apr 26 2011, 07:56 AM

before buying the Elite 360, all that I consider is to have a small system without sacrificing too much...but then I had absolutely no idea that 6870 would be that hot...as far as changing the casing, it will be the last resort and I still want to find a solution...for now, the fan have to run higher...hehehe...

dual red ccfl
dual uv

Ya, but in other country, USP 100 are coming with a 500W PSU