dunnow, thats why i ask.
say, you have a pair? can i check with you in private message wether the stuff i use is correctly cloned or not?
PC Audio Edifier Speaker/Headphone Fan Club V5, The Passion of Sound
PC Audio Edifier Speaker/Headphone Fan Club V5, The Passion of Sound
|
|
Aug 16 2010, 03:55 PM
Return to original view | Post
#21
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
dunnow, thats why i ask.
say, you have a pair? can i check with you in private message wether the stuff i use is correctly cloned or not? |
|
|
|
|
|
Aug 16 2010, 04:02 PM
Return to original view | Post
#22
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
|
|
|
Aug 16 2010, 04:19 PM
Return to original view | Post
#23
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
googler 'edifire r1900t mod'
press the images tab warght so sad!! tda2030 was the low down of eddifrie version made in china!!!!! i made something else instead CRAP!!!! GRRrrr salah!!! WAAa This post has been edited by beggarmaster2000: Aug 16 2010, 04:21 PM |
|
|
Aug 16 2010, 04:23 PM
Return to original view | Post
#24
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
go to besi buruk place armed with a screw driver?
hello boss? mau beli sikit radio speker berapa? and wear safety shoez =) i kena a few times di This post has been edited by beggarmaster2000: Aug 16 2010, 04:24 PM |
|
|
Aug 16 2010, 04:27 PM
Return to original view | Post
#25
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
err... monkey see monkey do?
i just write down the paper what i need, then go put my safety shoez rewire or replace with whatever that looks like the picture? |
|
|
Aug 16 2010, 04:44 PM
Return to original view | Post
#26
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
grrr now back to square one..... need to go find tda2050 for r1900t or lm3886 for the s2000
anyone wants a less powerful edifire made in BGM2K?? |
|
|
|
|
|
Aug 16 2010, 04:49 PM
Return to original view | Post
#27
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
|
|
|
Aug 17 2010, 07:30 AM
Return to original view | Post
#28
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
QUOTE(Cosef @ Aug 17 2010, 12:26 AM) Good there, but the spoiled speaker doesn't sound good. If the amp conditions were good you can try compile it yourself the amp into a box. only the looks is bad, i ripped a good pair of samsnug speakers to replace the broken one and currently the amp is housed in a shoe box.i read that my BGM2K is similar to r1900t only half as powerful with tda2030. i guess i have to buy a real one when i receive my paycheck =) i tested the amp, it seems to be at high risk of burning out when the volume pot is rusty. as you turn the dial the power light indicator flickers. for those of you that have r1900t, can you tell me if you experience same thing? QUOTE(chchyong89 @ Aug 17 2010, 12:43 AM) thanks for help =) |
|
|
Aug 17 2010, 03:54 PM
Return to original view | Post
#29
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
err... not volume pot burn or anything
the power supply to the amp chip is interrupted and is connected to the line in i don't know how to explain grrrr so when you turn the volume up or down.... the amp chip might blow when your volume pot gets old? |
|
|
Aug 17 2010, 11:41 PM
Return to original view | Post
#30
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
QUOTE(Cosef @ Aug 17 2010, 11:27 PM) amp won't be murdered by old working pot, if you short the pot's pin, yes....old pot will make some buzzing sound when you turn the volume, worst case is loud clicking noise. It is because the internal of the pot had oxidized. Imbalance channel also cause by oxidized pot....now most edifier speaker volume pot had grease inside prevent oxidation and smooth turning feel. thank you, its great help i realised my pot has died and is causing short circuits at a certain pointproblem solved =) |
|
|
Aug 19 2010, 09:59 PM
Return to original view | Post
#31
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
i went to cash converters in pj at lunch break today, i saw edifire c3 selling there 2nd,3rd,? ? ? hand for rm169?? condition looks okayla
looking at the parts inside on the other thread here, it looks like its a low down version of al**c's 21** model. the construction and materials looks 'less' and it is housed in a separate housing instead of inside the sub? i do not think it is worth buying for mod... maybe i should wait and see if there is better models there later. i kind of prefer the 2.0s This post has been edited by beggarmaster2000: Aug 19 2010, 10:07 PM |
|
|
Aug 20 2010, 08:40 PM
Return to original view | Post
#32
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
foreword: please don't shoot me down for thinking out loud =)
i thinking the way the it is being made is not very right the sub of c3 is 8" 8ohm? i think the optimal speakers that it should run on maximum is 6x9" 4 ohms for its amp chip on bridged configuration and it is made for best connected to computer saundcard only because of the opamp circuit inside. also the original power filter cap is way too small to support such huge sub how much is the original price of it anyway? now? is cash converters cheating for the price? i was tempted to buy it at first. but now reconsidering because of the parts involved... and i'm a 2.0 lover |
|
|
Aug 20 2010, 09:04 PM
Return to original view | Post
#33
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
QUOTE(power911 @ Aug 20 2010, 08:48 PM) indeed is true that the amp doesn't provide enough power to move the subwoofer correctly. rm400!!!!!! wowwwwwwwww i think i have enough parts to actually build it myself?? One will have to mod them to be more powerful to allow the stiff suspension of the 8" sub to break in correctly. but still I like how it sounds Edifier C3 costs RM400+/- really wish to see what you can do to mod the C3. but if you still wants a 2.0 go for it then. hmmnn rxy makes me mouth water!@! time to go look inside my parts plastic bag maybe i can build c3 amp hybrid with r1900t style 2.0 to save time and money modding the originals |
|
|
|
|
|
Aug 20 2010, 09:12 PM
Return to original view | Post
#34
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
crap! i'm going out of topic.... i'll go create new post when i building it this weekend
|
|
|
Aug 20 2010, 09:27 PM
Return to original view | Post
#35
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
i roughly knows what r1900t saunds like now that i've built a low down version of it..... but i'm looking for something more! so i'll just troll along =)
|
|
|
Aug 20 2010, 09:35 PM
Return to original view | Post
#36
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
you own a c3?!!! O_O hehe what mod you did?
|
|
|
Aug 20 2010, 10:47 PM
Return to original view | Post
#37
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
|
|
|
Aug 21 2010, 12:42 AM
Return to original view | Post
#38
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
|
|
|
Aug 22 2010, 04:37 PM
Return to original view | Post
#39
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
c3 lor
youngester prefer to flex the bass than monitor the sound This post has been edited by beggarmaster2000: Aug 22 2010, 04:38 PM |
|
|
Aug 22 2010, 05:26 PM
Return to original view | Post
#40
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Aug 2009 |
|
| Change to: | 0.0471sec
0.34
7 queries
GZIP Disabled
Time is now: 1st December 2025 - 08:03 AM |