QUOTE(mxsteven @ Jun 12 2010, 05:09 PM)
Dynoed edi woohoooo
126hp on bloody wheel hahaha
above 161nm torque....
a lil bit late but 126hp on wheels is a good figure for a pnp and flashed' waja 1.6.
with that figure, torque could be easily reach 180nm!
good job!
QUOTE(Azuma-kun @ Jun 13 2010, 09:26 AM)
Guys, for waja what is the best rim specs for 16"?
the width, offset
not so sure.
but as long as it was pcd 114.3, should be okay.
offset could be anything at +35, +38 or +40 with 6.5 or 7jj. depending on the tyre size / profile you're looking at.
either way, you may need to stay from profile 55 if your car is lowered.
safe bet will be an offset +38 with 6.5jj with 205/50... tyre. different below 3% should be okay.
do ask around for better understanding.

QUOTE(raymond1003 @ Jun 13 2010, 08:26 PM)
hey brothers, want to ask why my waja RPM when at idle always in between of 1000 - 2000 rpm
it should be around 600 to 800 rpm.
what engine oil you're using? have you try cleaning the throttle body?
perhaps, clean up the throttle body and retune.
ThunderGod_Cid could do the job for you
This post has been edited by yngwie: Jun 13 2010, 08:51 PM