SDSL also no use la..slow like turtle.. even dial up is faster la.

The original Emule is Good Enough... However, Emule with third party add-on or modification is ROCK!!!. But one thing for sure is the setting!! If you able to set your emule to satisfy all official credit system condition...then your download speed will be MAX!
Normal Emule setting already got a lot of stuff to tune ...
Modded Emule setting is triple amount compare to the original one

This post has been edited by InfiniteX: Mar 22 2006, 10:52 AM

Pls elaborate more buddy

Modded emule? Like dazzled mule?

some of those modded emule are:
1) MorphXT
2) CHN build
3) VeryCD build
4) EastShare
5) ACAT
6) Extreme
7) sivka

Each of them got unique set of add on feature, such as new credit system, private server, advanced files sharing, advanced A4AF, smart upload control......

VeryCD build try b4 and is the same..not mucg different and slow also..

where can get it?

Really this few software can slove the connection problem ?
can u provide the link to download it ?

First question: The answer is NO! the download speed is depend several factor:
1) Content e.g. chinese subtitle anime = connect to china/taiwan server for more source
2) Server e.g. who and where most user connected to a particular server
3) Setting e.g. Upload/Download Ration, Max. Connection, Hardlimit, Extended Setting....
4) Modem e.g. Processor + Memory + Firmware + Setting
5) DSL Status e.g. Modulation, DS Margin > 10 / US Margin > 10 to get stable line
6) IP address .....no example as different area got different range of IP. Certain range of IP is faster...
7) Special Tag e.g. Some server need specail tag to connect...special tag can be added to your nickname (For example: LYNP2P [CHN])

btw, most ppl think the higher Max. Connection value = more download or source
I am sorry to tell that they are wrong!!! (correct me, if i'm wrong )
When Max. Connection reached a value where your modem cannot handle that kind of workload = Traffic JAM
OR
When Max. Connection reached a value where overload DSL bandwidth = Traffic JAM

one more thing, although DSL can use with phone...due to streamyx equipment problem, each time you make a call or receive a call, the DS margin will drop! (this value will not increase back until you reconnect the DSL(remodulation))
hm......what else...

Second question: Sure...only some of them
MorphXT = http://emulemorph.sourceforge.net/
CN & ACAT = http://www.edonkey2000.cn/
Verycd = http://www.verycd.com/
eastshare = http://www.eastshare.net/

This post has been edited by InfiniteX: Mar 22 2006, 04:53 PM

hmm .. juz now trying bt also slow already ...
OMG .. is bt cannot dl and rmule cannot dl .. wat to do ?
juz now i go to a verycd to download the emule also the speed is cannot up to 0.5k .. aizzz !! piss off !!!

damn it...

I have on question about the server.met, since we're only able to connect one server at one time, is there a point to add lot of servers to the server list? If I add tons of servers to the server.met, is that mean I'll get more files and seeds to get?

NO, but you have more choice and more alternative to get source from the server you connect (Note: you still may able to get source from other server while you connected to a particular server with the COST of TIME and DOWNLOAD SPEED )

This post has been edited by InfiniteX: Mar 22 2006, 06:38 PM

How about the Global Search? Is that mean it'll search all the servers from the server list that u have added?

Mostly YES!
btw, forgot to tell NEVER uninstall or delete your emule for upgrade reason...Just overwrite it. Because this is where the emule keep your credit and don't try to hack the credit as most Emule equiped with anti-leechers control and anti-credit hack control

I don't quite get what u mean. First u said the purpose to add more server list is coz more choice and more alternative to get source, for example if u want to d/l some chinese stuffs u can choose to connect Chinese-oriented server in order to get more sources. But later u said u can get source from other server A while you connected to server B, which's kinda conflict with your claim above. Hope u can clarify more.

haha, let make it clear!
Server A in China
Server B in US
Client A in Malaysia
Client B in Taiwan
Client C in UK

Client A connect to Server A
Client B connect to Server B
Client C connect to Server A
Server A connect to Server B to get more source and reroute it to client

Network A
data route from client A > Server A > Server B > Client B
Network B
data route from clinet A > Server A > client C

imaging worse case scenario which data loss / corrupt during transmission = cannot connect or cannot get source

imaging average case scenario which data transmission delayed = you stand in a longer queue to wait for other to upload (First come Fisrt Serve)

imaging best case scenario which data transmission reached within time limit = you have smaller queue and higher download speed

Based on worse case scenario, Network A = cannot download thing at all due to loss of signal
Based on worse case scenario, Network B = can download thing with a lot of error

Based on average case scenario, Network A = can download thing at low speed
Based on average case scenario, Network B = can download thing with steady average speed

Based on best case scenario, Network A = can download thing with average speed signal
Based on best case scenario, Network B = can download thing with steady high speed

in other word, more route = more problem (correctly me if i am wrong )

This post has been edited by InfiniteX: Mar 22 2006, 06:32 PM

Lol I think u have misunderstood what I was trying to ask. My question is what's the real benefit to add more servers on the server list? From what I'm understanding from your statement, add more servers will only allow u to have a large server list for u to choose when everytime u fire up emule and connect to one server, and it doesn't effect the source that u want to d/l from, basically u'll only get source from the server that u connected and KAD. Correct me if I'm wrong.

What i mean is...
when connected to a server
Client <> Server < Source
then
Client <> Server <> Server < Source

Hey infiniteX,

Very detail help and explaination. I can tell you the truth is that my credit is not little you know. I have been using emule since two years ago(ratio is not low). So I am not sure that the "modded emule" will help exactly. I am not sure. I have not try it yet. how bout you ,did u get slow download speed too?what is your speed?kind to share?

Everyone can try all the modded emule stuff and get back here and ask the same question. THe problem is I "suspect" that tmnet have cap. But no confirmation.

My connection start to slow after the remove of razorback server. So is razorback causes that slow or tmnet have cap?

AFAIK, razorback store lots of sources of server interconnected for easy sources. Most people interconnected with razorback.

Another thing, emule settings are correct and port forwarding are good. What else can it be. I believe they are some who are not newbie to emule too but still have slow connection.

Let's share as much idea so we can to solve this problem together.

This post has been edited by commy2006: Mar 22 2006, 11:49 PM

No one sure that tmnet have cap the line... but one thing for sure is that the international line is over limit!!! and their server also overload!!!
Razorback does store lot of sources...this is because R2 server is the most highend which can support up to 10 million of user, while other server only support up to 1million ++
as i said:
Client <> Server < Source = is of cause faster
Client <> Server <> Server <> Source = is slower due to a lot of network issue

Since R2 down, most of the source is Decentralized!!! Do you know what that mean? we are now in Client <> Server <> Server <> Source network...

some basic setting guide
Connection tabs
Download Capacities = 64 for 512kbps Streamyx, 128 for 1mbps Streamyx
Download Capacities = 32 for 512kbps Streamyx, 48 for 1mbps Streamyx
Download Limits = MAX speed! (Do NOT PUT UNLIMITED!)
Upload Limits = 11kb/s (To meet 1/3 ration requirement, upload limit under 10kb requirement, average upload under 10kb requirement)
Client TCP Port = Any port that not being use by other software(Do not use default port!!!)
Client UDP Port = Any port that not being use by other software(Do not use default port!!!)
NOTE: please test you port by click the test ports button!!!
Hard limit = 200-300(Low memory system), 400-500(Standard System), 600++(High memory system)
Max. Connection = 100-200(512kbps Streamyx @ Multi User), 200-250(512kbps Streamyx @ Single User), 250-350(1mbps Streamyx @ Multi User), 350++(1mbps Streamyx @ Single User)
Note: More ppl using a single streamyX connection(with p2p software), the more bandwidth you need to divide
Autoconnect On startup = Yes
Reconnect on loss = Yes
Show overhead bandwidth = Yes
Kad network = Yes
ed2k network = YES!!!

Extended tabs:
Max. new connections / 5 sec. = Max half open connections *5 - 15
Max half open connections = 1-10: recommended 8 or 9 (Higher value is better but remember windows XP service pack 2 only allow 10 connection per sec)
Disable A4AF = NO! (Do not tick It!)
Files buffer = 256 (standard), 256++ (High memory sytem)
Queue Size = 2500 (standard), 2500++ (High memory system)