bro update mine

thanks

that one can take quite awhile to reach our shores bro, unless someone make a bulk

but then again, it'll probably be sold out early coz seems everyone's itching to get them maybe get a turion

asus@ maybe u should wait a bit get either a sempron with palermo core a turion mobile... but if i'm not mistaken u can get palermo in about a month's time...

well this one is a bit hard to expect, but most probably the price should be almost the same or a bit more than current processor now...

since ur going for s754, choices for waiting can either be palermo(sempron) or mobile athlon (turion)... but most probablt turion will be a bit herder to obtain locally, so best bet is palermo..

if don't wanna wait, then a bit hard to say the steppin... but after 0447 should suffice and give good results IMO

damn, amd64 mobile can go that high... some more C0 stepping only... i wish my proc can go that high

dang man, that's some very low temps good job bro

is the freezer that good, it seems can beat xp120

but still, it's gotta quiute cool there to get that kinda temps. wat's the ambient temp room there??

i still have a long way to go to migrate to s939

dude, that's one high htt, congrats

too bad it's on divider

yeah true but i'm more interested in 1:1 config

brudda, that ocz ram will only fly when u give high vdimm

once u put in 3.3V above, sure can go more than 250fsb

dun't worry man, as long as u don't go over 3.6V and got a fan above the ram sure safe punya

guys i have a problem and i need some opinions. currently i'm at 8*300 vcore 1.678V vdimm 3.0V.

at first at the settings above i could get stable at 1.65V. then after a few weeks my system got unstable to the point where my programs were terminated and get random reboots. so i increased my vcore a notch then everything was fine. now yesterday it acted up again, getting crashes and random reboots. so now i'm forced to raise the vcore another notch...

i wonder wat's wrong?? any of u guys have encountered this kind of problem??

i'm beginning to feel that my psu is the problem. before this i mod the psu so could supply high 3.3V rail. now that i've pulled down, probably it's beginning to destabiliza

but measuring the rails seems nothing is wrong with it... and that's with a multimeter. rams, hdd, virus and heat seems impossible coz tried overnite memtest and no problems, temps never go above 44C, had ghosted to virgin installation.... nothing works

it seems i mite have to find another good psu

yes be careful of ur processor, don't push vcore too much

it seems i've pushed mine too far, sent my rig to robyncom for checking and initial checking found out that my proc could be the culprit

oh man, dtr isn't that easy to find around here

nah i'm gonna wait till can get turion

to 754 users, can somebody help me and lend a spare proc?? i need to test whether my proc is the one giving me problems or something else

well at first i o'c at settings 8*300 wit vcore 1.65V and vdimm 3.0V. then a few weeks ago i got program crashes, thought it was the vcore so i increased some more.

the i again got problems with crashes... the increase vcore some more, still no dice. then i pull back to stock, that's where the nitemare starts i couldn't get into windows at all, even with fresh installation of windows. so i sent my rig for checking at robyncom. they said the cause was from too much as5 that it got onto the surface of my proc, making some contact on the smd... then problem solved so brought back. then i noticed it was running at 4*200 at vcore 1.0V.... i remembered that when u put dtr on default it will run at those settings. so i pushed vcore to 1.5V and 9*200 and got the same thing bsod as before...

that's y i wanna borrow a proc so i can really confirm its my dtr that's gone to the grave

problem is i don't know anyone nearby who uses s754 some more, my proc prob only work with modded bios'ed dfi 250gb only coz there's a 3 cycle wait to initialize dtr... so in other words, the rig mite or mite not boot up

so in other words, I need to borrow someone else's proc

no bios change ever since i changed to mobile compatible bios one

believe me, if i change bios i would've known and changed to diff bios beb

gengstapo2@ eh since when i bought dinster's psu?? u mean the ttgi one??

This post has been edited by jslut: Apr 25 2005, 04:52 PM

dude, how come ur chipset temp so high meh?? no small ramsinks on them?? that's very dangerous