nah i got it from the main guy
tried 3 different bioses also can
boohoo...nothing to play liao

tried that too, set the multi, fsb and voltages but it still didnt work

2 important and simple steps :

- lower your HTT/LDT multiplier (should be 5X default, set it to 4 or 3)
- lower your rams/fsb multiplier (set it to 166 or 133)

the options might be called something else on your mobo though

umm....it might if it's not stable at that speed
but there is no performance gain at all, or maybe so small that it doesnt make a difference
what you're looking for is simply the highest clockspeed regardless of the HTT
so just use a higher cpu multiplier, unless you're changing it to suit your rams

set everything back to default and it loads like normal?

the NB fan, that's around the max speed
stock fan only la

is it noisy at max speed?
my DFI is a little noisy but not too bad la at 7k rpm

lol yeah, but i set mine to about 4.5k for normal usage only
not much of a temp difference

feeling the heat is good, then u know the heatsink is doing its job
would be curious if it didnt feel hot at all

not bad, can go any higher?
what week is it?

u cant even lower the multi?
perhaps u missed it or its hidden under some section

wow gila meh...might as well they put 2.0 and 3.0 after that
anyway 1.7v is as high as i'll go for benching with some good air cooling
i guess on WC a little higher might be okay, but i doubt it's gonna give u another 100mhz so why bother

your HEC only has 15 amps on a single +12V rail, might be that which is limiting you a bit

even if it can take more than 1.7V, i doubt a little bit more is gonna make much of a difference
plus are u gonna be running it at 1.7V as your default setting?
i run mine at about 1.45V @ 2.35ghz only

i guess cause naturally the board itself eats up more power compared to the KN8
2 extra power connectors lagi, did they have that on the KN8?

but, did u ever consider upgrading your PSU anyways?

isnt nm nanometer?

oh, my assumptions failed me again