i lowered Vcore to 1.2875v (using from Vid). Its running at 45C on idle. hmmm...

i pushed it 3.10Ghz now. still at 45C idle.. next im going for 3.20Ghz.. is that wise, or i shud change my HSF 1st.

This post has been edited by jaya7: Apr 7 2010, 01:08 AM

depends on ur load temperature on Intel Burn Test.....
u shud keep it bellow 90c on load.

This post has been edited by tech3910: Apr 7 2010, 02:42 AM

Pushed it 3.20Ghz now. temp at idle is around 43c. Load was 49c.
ran Intel Burn Test at vcore 1.287. It crashed almost immediately. system went to Memory Dump and rebooted. Changed vcore to 1.30 and re-rum the test (on Standard). This time it was successful. Should i leave it at 3.20Ghz? Speed is good but im just worried about the CPU core temps.
reading are as follows :


Hardware monitor Intel Core 2 Quad Q6600
Temperature 0 50°C (121°F) [0x32] (Core #0)
Temperature 1 48°C (118°F) [0x34] (Core #1)
Temperature 2 47°C (116°F) [0x35] (Core #2)
Temperature 3 48°C (118°F) [0x34] (Core #3)

again. thanx for your guidance bro. really appreciate it.



Attached thumbnail(s)

thats idle temp or load temp?

---

Added on April 7, 2010, 4:44 pmif its load temp...it should be no problem

my Q6600 running on 400X8 mhz at 1.35v vcore...load temp around 60C

This post has been edited by hong1380: Apr 7 2010, 04:44 PM

thats load temp bro ASUS Ai seems to be giving average of the temps for 4 cores. So i guess its not very accurate.

i think it should be no problem ba...lower than mine

push it summore.....

btw....on stress level...put maximum......& run minimum of 5 loops......

show screenshot like dis.....



This post has been edited by tech3910: Apr 7 2010, 05:11 PM

running on that settings...its like killing the processor for me..lol

wit sufficient cooling, i dun see any problem running on dat setting 24/7.....

actually i don't run dat setting 24/7, just wanna see my q6600 can reach 3.6 o not....
coz every q6600 users hopes his/her processor can hit 3.6......

usually, for intense gaming, the setting is on my siggy....
but during non gaming season like now, just doing dl, i set tit to 410*6 + under volt it to 1.024vcore.....

No issue,temp is normal
Nothing to worry about

Great but on 32 bit OS you could only run on Standard.. hmmm... i'm gonna get Mega shadow soon

Current Vcore set at 1.270v. any lower than that system wont POST. at the moment Core temp is like below at idle

Installed speedfan to see if temp reading are more accurate. all i get is juz confused. Which is reliable ?


This post has been edited by jaya7: Apr 7 2010, 11:09 PM


Attached thumbnail(s)

Latest :

cpu : 3.3ghz
vcore : 1.462v
Idle temp : 40-41C
Load Temp : 65C (Max) -> Intel Burn Test
Cooler : Prolimatech MegaShadow DLX Edition

This post has been edited by jaya7: Apr 8 2010, 06:56 PM


Attached thumbnail(s)

i think ur vcore is too high for that= =...

Im gonna lower it more

thats my CPUID for my Q6600 at 3.2ghz at idle temp

load temp will be around 60C

---

Added on April 8, 2010, 7:00 pmi think u better tweak the settings on bios manually

This post has been edited by hong1380: Apr 8 2010, 07:00 PM

i lowered it to 1.392 and temp dropped to 39c at idle. i'm gonna push the FSB to reach 3.4ghz. hope to reach 3.6g and idle temp 39-40c like bro tech3910's OC settings im getting greedy .. lol

the temperature different between 2 s/w boz dey uses different tj. max value....
stick wit core temp, more accurate.

oc from bios la.
disable eist & c1e for improve overclocking.

tweaking from BIOS. raised to 377*9 now. able to POST at vcore 1.33125v Intel Burn Test was successful. Idle temp is ard 38C. Load was at 44C when running burn test.

tip:

say 378*9 ~ 3.4GHz
& 425*8 = 3.4GHz

the 425*8 setting will b faster coz fsb is faster.....

i hit 3.60 with 400*9 vcore at 1.41. idle temp seems to be at 40C. but when i look at core temp its average 44-45c. i compared to your screenshot, i can see yuor core temp showing average 39c.. is something wrong with my settings??




Attached thumbnail(s)