thx Fili
---------------------------------------------------------------------------------------------------------------
yea i do a lot of reading before start this project and thx for the link u give, now reading it

---------------------------------------------------------------------------------------------------------------------
Update 22/01/2010 6:50 pm:



This post has been edited by blaze_spirit: Jan 23 2010, 05:33 PM

u should sand the surface first before u do the primer...
let the primer dry before u sand it...

usually need to wait how long before i sand it ? i saw other post on other forum is 24 hours....but i cant wait !!!! 12 hours ok ?

better let it for 24hr...

cant wait 24 hours....sanded juz now (wet sand 400 and 600 grit)

now wait it to dry and apply 2nd primer coat

post pic bro. every single steps u do.

ok sir

---------------------------------------------------------------------------------------------------------------
Update 23/01/2010 11:12 am:



-----------------------------------------------------------------------------------------------------------------
Update 23/01/2010 2:32 pm:



waiting it to dry before i apply white primer as guide primer

-------------------------------------------------------------------------------------------------------------------
Update 23/01/2010 5:27 pm:

apply guide primer (white)



again, wait it to dry completely before sand.....(i hate to wait )

---

Added on January 23, 2010, 6:14 pmsomeone plz tell me how to solve this......



cutting not good.....

This post has been edited by blaze_spirit: Jan 23 2010, 06:14 PM

how ?

sand the paint to bare metal... go hypermart buy the glue called epoxy... two tube one... mix it... applied... let it dry out... than applied again... let it filled up... than sand away the extra. remember to sand the paint 1st or it will not stick...

there are other stuff called bondo but it will not be as strong as epoxy.

need to sand down the paint...(tired...)

btw, i heard b4 the 'bondo' thing but where can i get it ? Thx

bondo aka filler aka plaster can get at hardware shop... same thing... need to sand to bare metal.

apply eposy and ready to sand after 24 hours waiting


after sanding, yea its smooth
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

---

Added on January 29, 2010, 5:04 pmupdate 29/01/2010 05:05 pm:

---

Added on January 30, 2010, 7:49 pmUpdate 30/01/2010 7:38pm:



This post has been edited by blaze_spirit: Jan 30 2010, 07:49 PM

Woooooooooooooooooooooooooooooooooh nice one. Very rajin

Why u dun use samurai spray paint ?

bro,wat is hacksaw ??

thx. saw that hole really make me sweat a lot
---------------------------------------------------------------------------------------------------------------------------------------
cant find it at my local hardware shop, only got anchor brand mind to tell me how much for 1 can of samurai spray paint?
-------------------------------------------------------------------------------------------------------------------------------------------------------------
it look like this.


currently final exam in progress, so modding onhold until friday, stay tune for more update

This post has been edited by blaze_spirit: Feb 1 2010, 08:05 PM

Normal colour of Samurai brand is RM 6

woot, thats cheap but hardware shop nearby my place didn't sell this brand



This post has been edited by blaze_spirit: Feb 6 2010, 07:07 PM

Update 06/02/2010 7:02 pm:


-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Update 07/02/2010 12:40pm :



Update 07/02/2010 5:20pm:

---

Added on February 7, 2010, 10:04 pmUpdate 07/02/2010 10:03 pm:



This post has been edited by blaze_spirit: Feb 7 2010, 10:04 PM