Hi All!

Anyone tried installing Silvia S15 stock 4-pot front brakes and rotor on a Sentra N16? Was it a plug and play for both?

Thank you. =)

It's definitely not plug and play... S15's is using 5 lugs, N16 is using 4 lugs...

Hi Vanquish!

Planning to re-drill the rotor to 4x114.3 PCD. But the thing I'm not very sure is after the re-drill, will it be just plug and play?

Thank you for your insight.

=)

I'm not very sure but I think you still need to modify the steering knuckle...

Hi Vanquish,

Thanks for your info. =)

Aik, didn't know that even got nissan sunny club.

I'm driving B11 Sunny 130Y. Metalic blue silver.
Not sure what year the car born. hahaha.

Just replaced my OEM Air filter wif K & N drop in.....can feel a slight difference from Mid - high RPM + wif a slight roar due to d air flowing in at a faster rate....yet to change Denso IR....

Bro Vanquish, any idea what brand of a shock absorber & coil spring that can be mated to Sunny 130y? D car is getting bouncier day by day la.....

Hi, shinkawa, welcome to our little club...

I'm not familiar with B11's shock absorbers... How old is your coil springs? Usually coil springs no need to change wan, unless you wanna lower your ride height... I would recommend that you use back OEM shocks, which is from Kayaba or APM, I think...

Front 2 is 'KOWA' brand & just 1 month old. I think d OEM absorbers are a soft la...thinking of getting the gas filled KYB...but afraid if made d wrong choice...slightly stiffer is fine as long as d body roll is not so much as it is right now.

Any experience user of KYB or APM shocks? Oh...thanks Vanquish for d heads up

I'm currently using front OEM KYB and rear OEM APM shocks, they were pretty decent when they were new... They are slowly dying off now, I'm also pondering what kind of absorbers I should switch to...

This post has been edited by sitizak: Jul 16 2010, 11:02 PM

Altima 94' with SR20DET is good?

hehe... found few more sr16ve halfcut on my area....

Good, let me know more when u have the details...

Hi everyone, I have the following problem:

Model: Sentra 1.8 Auto

Problem: Normally, to shift gear, will step on the brake & click the button located at the gear stick.

Lately, cannot click this button (it is stuck).
Have to manually press the small red color button to shift.

Can anyone help?

The gearshift button must be broken, take it to a mechanic and get it checked.

hi,

a noob owner of a sentra xgl, 2003..
not sure if it's okay to start off with an inquiry from you guys..

other than going back to tan chong, any one of you happen to know of a place where i can do a eccs diagnostic check in petaling jaya? i was wondering if i can do something about my idling rpm..

any reliable nissan mechanics to recommend? (any idea how much would it cost to perform such diagnostic check and tuning?)

thanks for any feedback..

hi all, wanna ask for the sentra manual 1.5 year 2002. Have any problem for this car year, i know is old and need maintenance. Power wise i not so into it, just need comfortable. Advisable to go for it?

tonite we got tt at klang bukit raja...steamboat..
contact me on 017-3338633 Chee Kian

---

Added on August 1, 2010, 12:17 amBump up... seam like very less ppl at heare nows day....

juz get 2 B14 2nd Model aka Big Butt Spoiler


This post has been edited by Kian2391: Aug 1 2010, 12:17 AM

Hmmm, I wonder if this Big Butt Spoiler is the same as my B14's spoiler...