some ppl nvr read prev post

im also a newbie mah!!! hahahahaha

compensation is also not known as modification

i dun mod stuff... i just compensate those stuff that not in my car hahahahaha

car too heavy.. u compensate put more power

ahaha now i get what u guys mean by unpeel the banana after watching the vid!

sorry fr asking, i'll read through it now..

nayte also interested wor

dun say others.. u go do first

Ehh.. u say u do 1st... Dun con me leh

wait my pay come in first.. i broke d this month

1. new rim
2. new battery
3. new starter
4. new power window motor
5. threebond

= 1.6k

need to control d...

Almost same here

1. New rim
2. New brake pad
3. New headlamp
4. Interval service
5. Threebond
6. New air filter
7. Mamak x3

Need to cut off the pipe d

This post has been edited by swk_sam: Mar 24 2010, 10:30 AM

next month i aiming for new brembo max brake rotor and steven reflashing.

This post has been edited by WhitE LighteR: Mar 24 2010, 11:20 AM

eh, im also interested on the brembo max, but i'm going to change my brake pad first to see if it is good enough or not

my disc is terribly worn out d.... the brembo max is not cheap tho... 500 bucks the last i check...

This post has been edited by WhitE LighteR: Mar 24 2010, 12:39 PM

Lolz just skim it 1 last time.. still can use de.

scared badly d.. cannot skim anymore

yeah, i'm aware that the brembo max cost RM500 for front only
how many times can we skim the rotor actually?

once should be enough. There may be a 'wear' or 'skim indicator' on the side of the rotor

---

Added on March 24, 2010, 3:27 pmlol guys, just came across something.

What if you guys have a broken hose or a cracked radiator top? Or perhaps a cracked intake manifold, leaky power steering hose?

Check the below video out... Anyone interested?


http://www.youtube.com/watch?v=bSmgEkbp5eM

This post has been edited by ThunderGod_Cid: Mar 24 2010, 03:28 PM

Cannot measure by how many time... We dunno how many mm did the mech skim each time, some skim thick some thin, its depend on how thick your disc rotor left. If I not wrong, standard rotor thickness is around 286mm (depend on model) so max u can skim is around 250+mm. What I posted is just a guide, please get advise from mech for you cos afraid different rotor used on different batch.