i'm sad, my crappy chip + mobo got buyer ledi... bye2 biostar, hi hi xxi...

xii is becoming like xiukeong (giga) or xixo ( DFI??)
bye2 to the "resignation"

and come2 to the c3 chip..right sis?

U want to see my C3 puff out smoke or whut?

---

Added on January 16, 2010, 11:48 amHi hi xxi?? Must be DFI & C3 555

This post has been edited by cloudwan: Jan 16 2010, 11:48 AM

eh Wait.. IMC Stability depends on NB Volts or CPU-NB VID?
Or both?..If both..which affects more?

IIANM I would say CPU-NB VID... I never touch the volt setting for my NB at all, only the CPU-NB VID

touch the NB and we will see..

1.5 is not a big deal leh... (kata sire antonio)
i just dare to run 1.5v-nb on my sempron (550BE pernah..tp xlame)..even burned nothing to loose...

puff puff pop..
the NB temp affected much even small increament of NB volt applied... (talking about mobo NB)

unker broke his promise again

Once an overclocker will always be an overclocker
The poison is un-resist-able - -

Bought long time

weird,my nb-vid maximem only 1.25

ONLY 1.25v? Mine at stock only 1.1v ler.. 1.25v is quite high already

nic.. u need to change at bios..
search for the HEX code first for it..

i try all the bios already,some even cannot boot when hex code pass 17

---

Added on January 16, 2010, 9:51 pmcloudwan,i need it when crank up the nb freq.
now this is weird issue make me can't get nb freq pass 2500mhz
btw,urs lower maybe due c3 stepping

This post has been edited by nicholas0507: Jan 16 2010, 09:51 PM

sure c3 has better IMC..

LOL it's just a misunderstanding, i thought why the heck u need high cpu-nb vid when ur running stock 2.6ghz from ur SS..

Pi season

I'm using the latest one.. no problem with it.. kinda weird..

latest one only be processor can show nb-vid in bios,mine one still able to unlock the cache,but can't adjust nb-vid in bios,try AOD maximum only 1.25.
probably i got a bad chip?or dfi bios issue with this chip?

btw,how far u can push ur chip now?
hardly saw ppl with dfi board unlock b50 in lyn

Perhaps the bios, i'm sorry if i was wrong, but dfi bios support kinda slow

playing with this for the lulz...
http://valid.canardpc.com/show_oc.php?id=953597

I'm kinda retired to do high clocking, just for fun in term of seeking possibility of lowest voltage+max clock than can achieve with it..