lolwut? antonio surrender... please don't

malu la verdict..not like urs... toooooooooo slow.

| kuntawakaw | Win 7 x86 | AII 4400e | 266x13.5 | BIOSTAR TA790GX A3+ | 1 x 2G KINGMAX DDR3-1333 | DDR3-1418 6-6-6-15-16



for countless time of failure...lot of my service wont start after i revert back to normal daily mode...dang

This post has been edited by kuntawakaw: Dec 27 2009, 11:49 AM

| owikh84 | Win 7 RTM x64 | i7 920 | 200 x 20 | DFI Lanparty DK X58 | 3 x 2G Kingston HyperX DDR3-2000 CL9 | DDR3-2000 8-9-8-24

Sure can bro! try to play with trc and tras setting using cpu tweaker!

Hope that this will help you bro!

verdict using his friend account once again! haishh!

This post has been edited by elmodistortion: Dec 27 2009, 12:01 PM

nahh..sure cant la...verdict is a sifu....
(cpu tweaker cause issue in my windows last time..so i dump... memset i cant use cuz lazy to change the font size back to norm...so all timing in bios been adjusted and some in AOD oso)

~~~~~~~~~installing xp naw..

Im not sifu ler kunta! trying to help oni to make sure we all happy with our own result!

Go Go Go kunta!Are you sure antonio bro! ekekekeke! come on let the spirits within!

This post has been edited by verdict: Dec 27 2009, 03:26 PM

surrender?? the Captain of AMD fleet surrender??

same here though (not the surrender part). been increasing volt to run tight timing or high ram speed. both no go. my corsair is crap i think.

still, still trying~

Ok ok ok lahhh...

Syiok...syiok...

| 18m.31.531| antonio | Vista 64bit | PII X2 550 | 248 x 14.5 | MSI 790FX-GD70 | 2GB x 2 Micron D9 1066 | DDR3-1652 7-7-7-20

Wahhhh!!! good result antonio sir...awesome RAM timing and Speed!

I cant hit that speed with CL7 due to lousy ram!

MICRON FTW!

This post has been edited by verdict: Dec 27 2009, 03:39 PM

woah u guys...the fx board real awesome..

me have to restrict the nb.. now 2.6 also hard."cold boot"..need to change board fast leh...

sis verdict and bro antonio, i found something is not right with mine PI calculation...
why my real@available memory +ve but both of u is -ve?
care to share?
nwy, if used 32-bit os, sure cant beat 64-bit rite?

Dunno...Never thought of it though....

OS i think not so choosy...because SPI only use around 260,000k or 260MB amount of ram only....

---

Added on December 27, 2009, 4:13 pmat 3000mhz NB, prepare to pump 1.48v to 1.55v to stabilize the IMC...

I use around 1.53v to allow Calculation to be complete...


This post has been edited by antonio: Dec 27 2009, 04:13 PM

BTW antonio sir brapa volt kasi taruk sama micron bro? Gila syiookk!

no bro, what i mean is if used 32bit cant read full 4GB rite?
im think it will d effect calculation

1.70v in bios = 1.748v tested using MM at voltage point...

---

Added on December 27, 2009, 4:56 pmDun think it matters much...like if you were to use 5400rpm HDD or SSD when Super PI'ing....

This post has been edited by antonio: Dec 27 2009, 04:56 PM

Okay..managed to cut around 40-50 secs.This time with Services Tweaks(turn off services & Apps).It turns out there is only 1 seconds(faster) diff if i end explorer.exe task.
I only overclocked my HT Link and NB Frequency,didnt touch Memory Settings.
It turns out my Windows 7 is faster than my nLite Windows XP by 10 seconds(both with same tweaks applied).Strange though - -
There are no SS taken though(for the XP)


18:47.477 | AMDAthlon | Win 7 X64 | Athlon II X3 425 | 267 x 13.5 | Gigabyte MA770T-UD3P |2 x 2GB KVR DDR3-1333 | DDR3-1424 7-7-7-15

http://www.mypicx.com/12272009/SPI_32M/


Will find more time to tweak later(school ~.~ )
Next post should be tweaking RAM or HTT..Need see 1st - -.It ate alot of time..need patience

This post has been edited by AMDAthlon: Dec 27 2009, 05:14 PM

i think mine resrict the NB freq.. even 2.6 atas sket it stuck.. stuck at booting... not in win...
dem..so i have to play ram more... tonnes of failure edi sir...

wta... dual and single channel affect much? mine single

---

Added on December 27, 2009, 5:48 pmi pumping around 1.9 edi now sire.... haish...
still the time not satisfying

---

Added on December 27, 2009, 6:04 pmnow im heppy.. the increamen in nb-vid not working mebbe..stuck at <2.6..now i able to boot with 3ghz...using the mobo voltage increament..
later post..

This post has been edited by kuntawakaw: Dec 27 2009, 06:04 PM

good job in shaving the time.... keep up the good work

mine oso!
i just chnge my OS from 7 to xp, tod will get better result, but more worst ade r!
even learn new skill oso cant beat last time i PI'ing in 7 w/o tweak
btw sis verdict, why did u change from 4 to 1?
can get better result ka?
u know what i meant by that right?

@ bro antonio, ur pics cant see lor