Wharfedale obsidian 5.1 package. Is about 3k.

Got my RX-V473 after getting poisoned by a friend's Aventage series.  Used to have a cheap amp but has not revisited home theatre systems since it died a long time ago.  Was pleasantly surprised how far AV receivers came along. 

Hit the same error when updating firmware to 1.14 from the receiver unit itself, downloaded firmware into USB drive and it works. 

Love DLNA - playing music from my WDTVLiveHub. 
Minor detail :
Net Server mode to play music > change to any other scene/input source > change back to net Server.  It gets out-of-sync and keeps waiting on "loading" to display music list. 
Hitting "Net" to cycle through Net radio, airplay and back to Net Server solves it. 

IR Remote control seems to drain new Energizer batteries in 2 days. Swapped 3 sets of new batteries.  Got the remote control changed from the shop, we'll see how this one goes but I suspect I just got a lemon. 

I keep getting "Error - Too noisy" when trying to auto calibrate with the YPAO mic, even at night with the ceiling fan off.  Chose to proceed anyway and then tune by ear. 

Once the initial setup is out of the way, I'm enjoying it. 
Went out to get the NS-SW210 a week later.  Although auto-calibration sets the crossover at 40Hz, I found it to be better at 110Hz.  After which looking at articles online looks like that matches my small to mid size speakers.

Ya forgot to mention. Do not trust Yamaha Ypao settings more often than not they give you false info like your speaker are out of phase, subwoofer recommended setting given way to low at least for me. Trust your own ears more and the sound that you want to hear and not what other people tell you.

The higher end models like the 673 has YPAO RSC (Reflected Sound Control) which also measures reflected sound and compensate for areas where you have wall on left and none on right. 
The 473 doesn't have RSC, so it's definitely not accurate unless you have a rectangular room.

---

Added on December 5, 2012, 10:37 pm

Like the folks said, you can turn on test tones which cycles through each speaker & subwoofer.
Under Setup > Speakers > you have:
Configuration
- speaker size
- sub crossover freq
- extra bass (you need to set front speakers to Large)
distance
level

Go download the manual, I finished reading it before going into the store to test it out. 

Pretty close to klangvalley. Puchonglang said HN selling at RM1590.

but but SS2 Legend seems to have a very bad reputation for quoting very cheap price, and then said no stock

That is low.    Guess can get below RM2k with speaker package.

Than I go HN audition first. If ok, than either HN or legend.

Why the speaker set so expensive?

What is the sub model? Got the punch in your hall?

when u purchase o? i heard from yamaha seller 474 no stock b4 CNY. cheap ur price... sure can get that price? very tempting

HN price is like cow and pig slaughtering price....was looking at the YSP-2200 last week there...price was RM36xx ....Desa HT only RM2999...automatically quote me RM 2.8K when asked..

Anyway, i might be looking for a new receiver...budget should not exceed 2K (but the cheaper the better). The V 473 looks like good choice...RM 1.3K?? Is there an entrey level V 373 model? This one won What HIFI award wor...

Currently using RXV - 520...got some problems, probably will buy a new one if not fixable. I am very satisfied with my RXV-520....this RXV-373 seems to be more than adequate. I don't need so much power...even the 520 i only set max 35% of the volume most of the time...(...don't want neighbours came knocking with pitchforks).

http://my.yamaha.com/en/products/audio-vis...3_g/?mode=model

Can get for RM 1K or thereabouts?? Or this model not selling anymore??

Hei, your SW is 315 right? How you place your SW? rev or normal setting? freq cut off?

I cannot get an optimise position and bass. When I put it in stanby mode low/high. the AVR cannot wake it up. Always in red light.

I play with the knob from 60, 80, 70... No feeling. The AVR set cut off at 90.

Even now playing song, the SW zzzzzzz....

What is PSY?

I have to off the standby low/high in order the SW work.

Where you place the SW? The knob side facing you? The hole side need to face the wall?

You want me gangnam style infront the SW? 

Will try 45deg. Probably hall room is not good condition.