be patient and slow k dude, oc at ur first tym can get little annoying, u will owez wondering of this kind of questions after u oc..
1- will my hardware (proc) be ok..
2- is the vcore stable
3- the temp is quite high..is it ok/normal
4- damm bsod crash//wat to, what to do
gudluck btw, once u know how to oc, it is fun..hahaha

ahahaha...alrite..ill make sure everything ok..will post again later ya..

Typo error ok ? jeez..

Correction : INCREASE, not decrease


Personally I wouldn't run my processor at 1.40+ Vcore, its like living on the edge.

TQ

UPDATED!!

OC success? where's the result? how far u push?

2.4ghz to 2.5ghz oso can be called success OCing!

actually for 1st timer i don't recommend playing with the voltage (vcore/vdimm etc)..just stick at default. Normally u can get at least 200-300MHz. For ram speed just put as low as u'r mobo can support.

just play with the FSB 1st after u really understand how OC works

Bro, 1st i juz go for the fsb to 333..and 9x333....but unsuccessfull...
then i adjust the ram to 800...coz on the right side, it state that if below 800, might be problem when booting...
so how..the voltage..its auto i think..i dont disturb any of those...mayb it change when i change the dram to 800..

---

Added on August 15, 2009, 4:14 ambro..i attached the picture...cpuz at the front page
help me if ders any default or things that ive done wrong..

This post has been edited by zoslan: Aug 15 2009, 04:14 AM

1.4v eh.

does it really need that much voltage??

bro..im new to oc..1st time oc....thats why i need you guyz guru guru here to help/suggest/or watever to help me get better...learning maa..heheheh
well anyway..how much do i have to decrease it bro?? thankx alot ya..

1st check the stock vcore of the proc.

use coretemp or everest.


after that try to match the stock vcore at the bios.most q6600 can do 333fsb at stock vcore unless u got the not so oc friendly ones.

Thankx for the guide bro..appreciate it very much
i will try to check and learn the problem im into
...stock vcore can do also ya?? hmm

---

Added on August 15, 2009, 4:39 ambro..i update the pic core temp at front page...

i think its 1.3250 rite?
izit thats the one u mention about?

This post has been edited by zoslan: Aug 15 2009, 04:39 AM

btw u disable the EIST and C1E???

i personally prefer it to be switch on as those quad are not known to be power efficient.

---

Added on August 15, 2009, 4:41 amya 1.325v is the stock vcore.

try running it at that voltage and see if its stable.if it dont then up it by a notch in ur bios setting.

by a notch i meant the 1 higher value other than 1.325v.

This post has been edited by hilmiangah: Aug 15 2009, 04:41 AM

ok bro...BUT ONE MORE THING...hehehe

Explain to me wats the EIST and C1E???




i mean, i know its stated 0 in the core temp..but i want to know where can i find this? in the bios?

This post has been edited by zoslan: Aug 15 2009, 04:44 AM

EIST and C1E is a power saving feature.
by disabling it one said that it improve their overclocking result and make it more stable.

btw what this 0 u talking bout??

forget the 0 thing..hehehe typo typo prob

so..i have to enable it in the bios rite? am i rite

yeah.

usually at the CPU feature section.

bro..i change the 1.325v now..seems ok now..but i cant find the EIST and C1E
but i will reboot again after this to find those two..hehe..sorry bro..very new to this

just by dropping that vcore ur proc temp is lower.


btw take ur time and explore the bios.

ok bro..i will explore the bios in a short while after this..

so now the vcore proc is ok rite now izit? wat do u think bro..thankx alot