http://www.bit-tech.net/hardware/cpus/2007..._2_quad_q6600/1

http://www.tweaktown.com/articles/1159/ove...ghz/index1.html

---

Added on August 10, 2009, 11:04 pmwhat to decrease since the max multi is 9.

---

Added on August 10, 2009, 11:05 pmQ66 have a multiplier of 9 and u can only decrease it lower than that value only.

This post has been edited by hilmiangah: Aug 10 2009, 11:05 PM

1.4v eh.

does it really need that much voltage??

1st check the stock vcore of the proc.

use coretemp or everest.


after that try to match the stock vcore at the bios.most q6600 can do 333fsb at stock vcore unless u got the not so oc friendly ones.

btw u disable the EIST and C1E???

i personally prefer it to be switch on as those quad are not known to be power efficient.

---

Added on August 15, 2009, 4:41 amya 1.325v is the stock vcore.

try running it at that voltage and see if its stable.if it dont then up it by a notch in ur bios setting.

by a notch i meant the 1 higher value other than 1.325v.

This post has been edited by hilmiangah: Aug 15 2009, 04:41 AM

EIST and C1E is a power saving feature.
by disabling it one said that it improve their overclocking result and make it more stable.

btw what this 0 u talking bout??

yeah.

usually at the CPU feature section.

just by dropping that vcore ur proc temp is lower.


btw take ur time and explore the bios.

well i dont know if it really stable unless u stress it urself but i personally thinks its stable enough.

u want a quick one???
linx then

http://www.xtremesystems.org/forums/showthread.php?t=201670

want a classic way of stressing then Prime95.


but i think 5 run of linx is more than enough to tell if its stable.

cant sleep lar.

so see this thread and share my knowledge with u.

everest is not for stressing,its more of a monitoring software.

for stressing its prime95,linx/linpack and OCCT.those are a few well known stressing software.

zoslan

i think ur oc is stable now.

congrats.

u can save more electricity/money buy running it on stock setting on those long torrent/downloading session.

well at least thats what i do.

but that will disable the EIST and in the long run consume more power.

thats why u stress it after oc.

if it wasnt stable thats when u add/adjust some voltage.