Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 TEACH ME HOW TO OC Q6600, 3.0 to 3.2!!! HELP ME..UNSUCCESSFULL!!!

views
     
TSzoslan
post Aug 10 2009, 01:08 AM, updated 17y ago

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
BELOW PIC SUCCESS TO 3.0GHZ...but NOW I WANT TO TRY 3.2GHZ!!! HELP ME, coz its UNSUCCESSFULL

Im using Q6600
Motherboard Asus p5Q-E
Cooler - CoolerMaster Tx-3 blush.gif
Ram 2x2gb xms2 (800mhz) + 1gb value ram
PSU : FSP Everest 600w 80plus

i think thats all that i have to list down rite..d others no need rite.. icon_question.gif

from this..1.4v
Attached Image

to 1.325v
Attached Image

Attached Image

Doing this stress test
Attached Image


PLEASE HELP ME/ GUIDE ME,,,is this correct????

This post has been edited by zoslan: Sep 7 2009, 03:58 AM
TSzoslan
post Aug 10 2009, 06:44 PM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(suicideroach @ Aug 10 2009, 10:24 AM)
Not familiar with asus board, but to OC till 3.0ghz should be a piece of cake for Q6600 G0.
Enter your bios, increase your FSB frequency to 333, and thats it  rclxm9.gif
No need to adjust other things such as the voltage and etc, as i believed Q66 can be OC to 3.0ghz at stock vcore  icon_rolleyes.gif
hehe
*
hmm..just the FSB??
anyone can suggest me view any website for newbie? heheheh
really wanted to learn from the beginning.. thankx guyz
TSzoslan
post Aug 10 2009, 09:07 PM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(*-a|i3n-* @ Aug 10 2009, 08:27 PM)
q66 is having 8 only
u only can increase it to 9 if not wrg...how to decrease?....

and TS

u can come in here and learn it...

http://forum.lowyat.net/OverclockersUnited

or here

http://forum.lowyat.net/topic/493588

else here.......

http://forum.lowyat.net/topic/183135

please post more details about your spec please...especially the ram timing.
*
alrite bro..will post details about the spec of mine by tonite..coz now using laptop...
and will read read read and learn step by step...

ram timing...hmmm hmm.gif
TSzoslan
post Aug 10 2009, 09:16 PM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(uzer85 @ Aug 10 2009, 09:14 PM)
or u can just bump ur setting like this

Vcore 1.35-1.45
Vdimm 2.1
MCH core 1.35
fsb 400x9 multiplier
1:1 divider

but better u read and learn first. nod.gif
*
ahahah..thats rite my fren..
coz i dont even know a thing about vcore and those those..im just a normal user,gaming,setup..and bla bla bla..overclocking?? wanted to learn notworthy.gif

and better i read learn and understand 1st ok..so..any site suggestion besides above forum my fren?
TSzoslan
post Aug 10 2009, 10:54 PM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(uzer85 @ Aug 10 2009, 09:27 PM)
this is a good thing for u! read it and try to understand it.

http://forums.extremeoverclocking.com/show...ad.php?t=261409
*
Thankx for that my fren..will read learn and understand it smile.gif
thankx again
TSzoslan
post Aug 10 2009, 11:55 PM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(safone @ Aug 10 2009, 11:19 PM)
Some of expert using "PIN MOD" with conductive silver marker pen..
The easier way is using "Tape mod"..just tape 1 pin at the processor..
U can refer to this link->Q6600 tape & pin mod
*
adoii..makes me dizzy now..ahahaha

ok ok..this PIN or TAPE MOD.. will read it after i learn and master how to OC ..then go to the next step..

by the way.thankx for the info ya..hehehe.. shocking.gif
TSzoslan
post Aug 11 2009, 12:10 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(bad melatonin @ Aug 10 2009, 11:57 PM)
before u go further 'adoii', i think u shud read this 1sty:
http://forum.lowyat.net/topic/17713
*
thankx my fren..
ofcoz im goin the step 1 1st...any further, sure ill let you guyz know..and guide me thru..hehe

any problem wen i try to oc later on. will post here as well smile.gif
TSzoslan
post Aug 11 2009, 12:43 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(uzary @ Aug 11 2009, 12:41 AM)
be patient and slow k dude, oc at ur first tym can get little annoying, u will owez wondering of this kind of questions after u oc..
1- will my hardware (proc) be ok..
2- is the vcore stable
3- the temp is quite high..is it ok/normal
4- damm bsod crash//wat to, what to do mega_shok.gif  mega_shok.gif  mega_shok.gif  hmm.gif  hmm.gif  sad.gif
gudluck btw, once u know how to oc, it is fun..hahaha tongue.gif  rclxms.gif
*
ahahaha...alrite..ill make sure everything ok..will post again later ya..
TSzoslan
post Aug 15 2009, 12:48 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
UPDATED!!
TSzoslan
post Aug 15 2009, 04:13 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(sjn hassan @ Aug 15 2009, 01:40 AM)
actually for 1st timer i don't recommend playing with the voltage (vcore/vdimm etc)..just stick at default. Normally u can get at least 200-300MHz. For ram speed just put as low as u'r mobo can support.

just play with the FSB 1st after u really understand how OC works
*
Bro, 1st i juz go for the fsb to 333..and 9x333....but unsuccessfull...
then i adjust the ram to 800...coz on the right side, it state that if below 800, might be problem when booting...
so how..the voltage..its auto i think..i dont disturb any of those...mayb it change when i change the dram to 800.. hmm.gif hmm.gif

Added on August 15, 2009, 4:14 am
QUOTE(uzer85 @ Aug 15 2009, 01:34 AM)
OC success? where's the result? how far u push?

2.4ghz to 2.5ghz oso can be called success OCing!
*
bro..i attached the picture...cpuz at the front page biggrin.gif
help me if ders any default or things that ive done wrong..

This post has been edited by zoslan: Aug 15 2009, 04:14 AM
TSzoslan
post Aug 15 2009, 04:28 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(hilmiangah @ Aug 15 2009, 04:26 AM)
1.4v eh.

does it really need that much voltage??
*
bro..im new to oc..1st time oc....thats why i need you guyz guru guru here to help/suggest/or watever to help me get better...learning maa..heheheh smile.gif
well anyway..how much do i have to decrease it bro?? thankx alot ya..
TSzoslan
post Aug 15 2009, 04:34 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(hilmiangah @ Aug 15 2009, 04:31 AM)
1st check the stock vcore of the proc.

use coretemp or everest.
after that try to match the stock vcore at the bios.most q6600 can do 333fsb at stock vcore unless u got the not so oc friendly ones.
*
Thankx for the guide bro..appreciate it very much
i will try to check and learn the problem im into
...stock vcore can do also ya?? hmm nod.gif

Added on August 15, 2009, 4:39 am
QUOTE(hilmiangah @ Aug 15 2009, 04:31 AM)
1st check the stock vcore of the proc.

use coretemp or everest.
after that try to match the stock vcore at the bios.most q6600 can do 333fsb at stock vcore unless u got the not so oc friendly ones.
*
bro..i update the pic core temp at front page...

i think its 1.3250 rite?
izit thats the one u mention about?

This post has been edited by zoslan: Aug 15 2009, 04:39 AM
TSzoslan
post Aug 15 2009, 04:43 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(hilmiangah @ Aug 15 2009, 04:39 AM)
btw u disable the EIST and C1E???

i personally prefer it to be switch on as those quad are not known to be power efficient.

Added on August 15, 2009, 4:41 amya 1.325v is the stock vcore.

try running it at that voltage and see if its stable.if it dont then up it by a notch in ur bios setting.

by a notch i meant the 1 higher value other than 1.325v.
*
ok bro...BUT ONE MORE THING...hehehe blush.gif

Explain to me wats the EIST and C1E???

blush.gif blush.gif notworthy.gif notworthy.gif


i mean, i know its stated 0 in the core temp..but i want to know where can i find this? in the bios?

This post has been edited by zoslan: Aug 15 2009, 04:44 AM
TSzoslan
post Aug 15 2009, 04:53 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(hilmiangah @ Aug 15 2009, 04:47 AM)
EIST and C1E is a power saving feature.
by disabling it one said that it improve their overclocking result and make it more stable.

btw what this 0 u talking bout??
*
forget the 0 thing..hehehe typo typo prob

so..i have to enable it in the bios rite? am i rite
TSzoslan
post Aug 15 2009, 05:04 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(hilmiangah @ Aug 15 2009, 04:56 AM)
yeah.

usually at the CPU feature section.
*
bro..i change the 1.325v now..seems ok now..but i cant find the EIST and C1E
but i will reboot again after this to find those two..hehe..sorry bro..very new to this blush.gif
TSzoslan
post Aug 15 2009, 05:07 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(zoslan @ Aug 15 2009, 05:04 AM)
bro..i change the 1.325v now..seems ok now..but i cant find the EIST and C1E
but i will reboot again after this to find those two..hehe..sorry bro..very new to this  blush.gif
*
Attached Image
TSzoslan
post Aug 15 2009, 05:15 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(hilmiangah @ Aug 15 2009, 05:10 AM)
just by dropping that vcore ur proc temp is lower.
btw take ur time and explore the bios.
*
ok bro..i will explore the bios in a short while after this..

so now the vcore proc is ok rite now izit? wat do u think bro..thankx alot
TSzoslan
post Aug 15 2009, 05:19 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
ic ic...ok ..seems ur awake now and very kind to help me...
will u mind to recommend me..wat software to download that i can stress my pc for a test...

iz the stress process safe bro? hehehehe sorry..for very noob question k..thankx alot
TSzoslan
post Aug 15 2009, 05:24 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
QUOTE(hilmiangah @ Aug 15 2009, 05:21 AM)
u want a quick one???
linx then

http://www.xtremesystems.org/forums/showthread.php?t=201670

want a classic way of stressing then Prime95.
but i think 5 run of linx is more than enough to tell if its stable.
*
alriet bro..ill try this one...so everything in that software will let u know its stable or not rite? hehehe

thanx bro..cant sleep meh? heheheheh
TSzoslan
post Aug 15 2009, 05:42 AM

Getting Started
**
Junior Member
246 posts

Joined: Aug 2008
From: Kuching , sarawak
thankx for the knowledge bro..really appreciate it..
what are the others software to stress juz now bro?

everest what? hehe..sorry
« Next Oldest · Hardware · Next Newest »
 

2 Pages  1 2 >Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0181sec    0.91    7 queries    GZIP Disabled
Time is now: 14th December 2025 - 10:39 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.