lucky you, me still left 4 papers to go 
tomorrow Quran Sunnah, tuesday chemistry. no time to do last minute chem revision 

anyway, check your friend request

that 6 hours if i ride 80-90km/h oni. nowdays, 130-140km/h lor. cannot tahan lama meh, sakit "buttocks".
ahaks.... 

---

Added on December 7, 2009, 1:30 am

ooo. wat skool? need to go using highway. y not skool near ur house? more near ma, hehe....

---

Added on December 7, 2009, 1:31 am
but can the engine blow????

12 subjects all. damn they put the extra subjects at the end of exams 

y send to sentul? better send to hong leong itself.....

---

Added on December 7, 2009, 3:14 pm

ooo, BM high. my housemate is ur senior then. nvm la, juz asking..... nowdays, kids go to school by their own motor.
when i was young, only walk from home to skool. missing those days....

less than rm50 for the bracket, my friend had made it before.
anyway, check your friend request 
hahaha.. then tomorrow you'll 'merdeka' already. mine still a week 

and yeah, that's the easiest way since it didn't need to re-route the wiring.
no problem i think, since the manifold located far below and they won't realise that. unless your bike sounds weird than normal,
then i think they'll ask bout that. but don't worry, i don't think they will saman you for that reason.

May i know that..
how can i smoke my LC taillamp?
when i'm going to the sticker shop..the boss told me that because of the curve of the taillamp..so can't tint it..

another question i got to ask all bro here..i wish to install the xenon look light bulb..but scare the cover of the lamp will melt..how?

oic..
not now lah..
before my lagenda..melt like shit..haha..
so now i wish to install only..i just scare melt..
but hear lot advice from my fren keep original..

i think no le..
so any idea?
that can make like xenon look?hehe..
HID kit?
another thing i got to know..
the radiator cover..
i saw RM30..worth?

i think it depends on type also, the one that comes with wire mesh is a lil bit expensive.
i asked bout it at a shop today, the price also about rm30. mine was already broken 

u can c ah akeem? wah, superman eyes r u... wait! or izit me with bad eyes??? 

hi~~i am new here~~quite noob~~
i will buy 135 lc soon
can i know got how many type of 135?

got any web can let me more understand bout 135??

em...i just newbie...so...just want to know got how many model n colour
i will buy 135 soon..so got any idea that want buy which model??

no 125z user in lyn?

haha.. aaron upload supersized picts mah,
so can zoom in further and see the radiator cover better
look at 1st page, most site listed there are essential to know this bike better.
or can ask here, most of forumers here are helpful
go to yamaha motor website, there you can view available colours for LC.

btw aaron, your Yamaha logo already missing meh? hahaha 

erm...i saw my frien driving a black-white ss...
but i no saw anyshop is selling this type of colour..where can it found?

by the way...i heard that es less power then ss..
is it real?
i need to confirm this

ermm...1st,2nd n 3rd generation got wat no same?

lol, my iguana with my LC

ayo ppl, wat time oredi? no need to sleep ah?
i cannot ssleep lor, got last paper for final dis morning.
robotic engineering more over, msti susah nk mmpus!!!

oh really?
i just saw it in complexs..
not yet get it..
half price ah?
ok..
bro..got any xenon look light bulb recomanded that won't melt the cover?

---

Added on December 10, 2009, 11:23 am

i just try..
my bike can about 120 km/h..
i think still can go..

hahaha.. chill out bro, that a**shole b*****ds are jealous with your ride mah. the early days when i first ride my bike to school, my senior also kacau my bike. they even put plastic wrapper in the sprocket cover 

but luckily the Yamaha logo still intact. i lost it when i went to a supermarket nearby, guessed maybe the kids stole it 
CDI = Capacitor Discharge Ignition. basically it controls the ignition curve for your ride and Yamaha used it to limit our bike's maximum RPM. stock bike actually can go up to 10-11k RPM. but for 1st gen bike, they limit it to 9200 RPM and for the later gen they decreased the limit further to 8500 RPM only. that explains why 1st gen bike can go faster than the next gen. i knew this by comparing the 1st gen spec sheet and 2nd gen one.
your ride reminds me to my good old green coverset 
gonna use it back this incoming week 

Ehh i feel that RM85 for just manifold is so expensive.... add abit more money can buy a second hand aftermarkets pipe. Why don't u check with Bee Hock he have 1 normal looking pipe but is a custom make for stock bikes. Sound very nice not loud. Somemore is very light weight.

even if it's manifold + welding service, i think still expensive la. chongkiat quote me the manifold price around rm30 only. welding service should be around rm10 only niah. and yes, 1st gen carb is a lil bit different. try to take a look at the pilot jet screw, it's slightly deeper.
what's the advantages of using this EO? never heard bout it before 
yes, it's LED type. actually got 2 types of LED, one is high flux LED (those white and square-ish small LED) and also normal LED (bulb look alike). high flux LED is generally brighter. if you wanna find the one that can brighten the road in front, try to find high flux LED which all of them pointed forward (if you look at my ride, the LED is pointed out in 5 different ways).

i bought my LC already three month d..
run about 1100km d..^^
by the way bro..
where you come from?

Disclaimer:


TryX: Are the bulbs separate power from headlamp or joined?
If separate, easy. Few options: Install rectifier, rewire to DC source.
If joined, need re-wiring to isolate from headlamp and direct from DC source.
*DC source: Either tap from battery, or from one of the wires supplying DC to ignition switch. If LED still flickers, just manually solder a 25V-200uF capacitor across each the lamp sockets, should be 50cents each (Yes, use a 25V cap).

Maybe one of these days, I make mini boxes for you all to plug and play.

Next topic: HID, Xenon, Halogen bulbs
In short, a 55W blue bulb would look cool, but won't illuminate as well. A good thing to invest in is HID conversion.

Next topic: LED bulbs
LED is nice and efficient, but are not always bright. The key to the brightness is power rating. Get those high-Lux LEDs, and high Wattage ones, at least 1W to 3W.
LED bulbs are not suitable for signal light, because the relay is not designed for low current... either your signal will not flicker, or flickers very fast. The solution is to either to install a parallel resistor or change to a suitable relay.

---

Added on December 11, 2009, 4:50 amNext next topic: Diesel EO?
Haha, I know this... but you guys can read up diesel engine evolution elsewhere la, not gonna explain here.

Nowadays, diesel engine use spark plug like petrol engine, not too high temperature vs the old type, so the EO is similar to petrol EO.

In short, no harm using either one. diesel EO cleans better and suited more for high temp heavy duty use. Petrol EO good for lower temp use, including daily engine start protection.

Google up "Diesel Engine Oil API" and you can read more about it.

may be u need this, im using it^^
T10 9SMD        1对     =RM28
http://www.jbtalks.cc/thread-548518-1-1.html
sorry for those who cant read chinese

i'm from penang.. 

---

Added on December 11, 2009, 10:17 am
thx a lot for helping us..     

---

Added on December 11, 2009, 10:26 am
mine is exactly like the 1.5W wan led as in the link wan..3 leds.. but i got charged 10bucks extra..zzz

yes, use post laju ...
depends on seller how much they want to charge u for the postage fees and the item's weight, the bulb i think only will  charge you rm5 for the postage, no worry