i try to use prime95 blend test as stable for 30min. stop cause the temp is shooting up from 40+ celcius to 64celcius.... is this consider high? i can feel the heat from my cpu using my stock HSF

guy unlocking core for phenom 550 using m2n68-am plus mobo is failed or succes????

This motherboard can unlock?
http://asia.msi.com/index.php?func=proddes...71&prod_no=1616

or this one?
http://www.gigabyte.com.tw/Products/Mother...?ProductID=3154

Looking for motherboard that can use back my ddr2 ram.

This post has been edited by 5564321: Mar 29 2010, 01:54 PM

i read some where that those Mobo can unlock core is to have
Northbridge 770,785,790 + Southbridge 710,750

either the combination on the mobo will have the unlock ACC mode

correct me if i'm wrong

correct.
even so u need to pray that your chip comes with healthy cores.

---

Added on March 29, 2010, 3:36 pmfailed
u failed too coz u don't even bother to read the thread by asking such questions.

This post has been edited by lhongwuh: Mar 29 2010, 03:36 PM

what chipset eh? 600 series cant i think... u may have more luck if with 780/980

add nvidia chipset 780 and 980 too... but not too promising..

any solution for my problem?

prolly a bad core there... there's nothing much u can do, just take d chip as it is (an x3 chip).

u'll have to accept the fact that its an X3 oni bro. still, u lose nothg

i see, but i hv google it got ppl sucess to unlock to 4th core..my bad luck

la failed ma usin m2n68 ??

i noe nothing bout unlockin anyway so just ask a plain stupid question

Thanks for the inputs .
Any motherboard with integrated graphics and support of ddr2 ram and also able to unlock?? Any help will be appreciated.

@5564321
budget?
i suggest biostar ta790gx here...

Rm300, cheaper= better. Haha. However, must be able to use back my DDR2 ram..now all am3 board also ddr3.

---

Added on March 29, 2010, 8:58 pmHey guys, just found out that asus site has a nice table about the motherboards to unlock processors. The TS is missing? Please update
http://www.asus.com/FeatureList.aspx?PG_ID...tSu5m&F_ID=7082

This post has been edited by 5564321: Mar 29 2010, 08:58 PM

Guys finally i success to unlock my Athlon II X3 435..

but there is no 4 core, its only change to dual core with L3 cache activate

can tell me why is no 4 core event when im success to unlock it?


Attached thumbnail(s)

@makoshark, what's your processor batch number?

@mako
u have a deneb core..

tried the sequence i posted? if cant x4..unless u can make it x3 + L3

Good, u got a Deneb, might wanna try some other seeting to see if all 4 cores can be unlocked.
so far your dual core with L3 unlocked is already better than ur X3 with L3 locked.

have any solution to unlock all the 4th core?

---

Added on March 30, 2010, 9:20 amguys its look like my unlock got a bit problem, after i made it,i run occt about 1 hour and pass the test event my cpu temp is normal between 46c-52c, the problem is when i try to restart my pc its become unstable,problem like pc hang when boot to window,no display at screen & sometime enabled unleashing fail..i need to reboot about 5-6 time then success to enter window with unlock mode, once i got in to window its very stable, the problem is only when i shut down or restart my pc..this is because of bios or wht?any suggestion to make my pc fully funtional unlock without reboot so many time?im really happy when 1st i made it but now feel like all my hope is gone

This post has been edited by makoshark: Mar 30 2010, 09:20 AM

maybe try to tweek ur voltage abit maybe it would help