x2 550 using MSI 790gx- g65 .. possible to oc ?

Then ur stuck with CF mobo's like Biostar TA790GX 128M bro

---

Added on July 30, 2009, 9:41 pmYes, the possibilities are very high

This post has been edited by cloudwan: Jul 30 2009, 09:41 PM

Hi bro antonio, I guess we shall continue our discussion and at the same time notify TS to update the result at the main page as some of us need to gather intel (where to buy, which combination, possibility , etc etc ) to make purchase and post the result here

Too bad due to my budget constrain and i dont plan to upgrade ofter, so i guess i have to stick with MSI 770 C45...or anyone got suggestion?

Mind telling where you got your quotation from?

This post has been edited by colinwong89: Jul 30 2009, 10:12 PM

if wan to stay on DDr2 thn go for Biostar TA790GXE 128m^^

Well then, anybody recently seen any 0922 batches around?

updated yours ..

This post has been edited by kit_kit: Jul 31 2009, 02:15 AM

ya , not 0922 also .. most of the batch can be unlocked... if you failed to unlock it , try to update your bios to latest one ... my bios got special functions for aac and i am using 0915 batch

http://www.itocp.com/index.php?action-view...temid-252-php-1
[ 0915FPMW ]
0915FPMW - __adil__ - Gigabyte MA790FXT UD5P - F3K - failed
0915FPMW - Cele303 - DFI 790FXB-M2RSH - 2001 - failed
0915FPMW - Cele303 - Asrock AOD790GX/128M - P1.50 -failed

[ 0918BPMW ]
0918BPMW - HellSpawn - Gigabyte MA790X UD4 - F3 - success
0918BPMW - Balb0wa - Gigabyte GA-MA790FXT-UD5P - F3K - success
0918BPMW - richierich - Biostar TA790GX - ?? - success

[ 0919EPMW ]
0919EPMW - Balb0wa - MA790FXT UD5P- F3K - failed
0919EPMW - peapod - Asus m4a78e - 082 modded bios - failed
0919EPMW - Radiant- - Jetway HA07 Ultra - HA07UA06 - success
0919EPMW - Radiant- - Gigabyte GA-MA790GP-DS4H - F3H - success
0919EPMW - Partizan - Asus M4A78T-E - 1402 - success
0919EPMW - Dopamin3 - DFI LP DK 790FX M3H5 - 0402 - success


[ 0920GPMW ]
0920GPMW - peapod - Asus m4a78e - 082 modded bios - failed
0920GPMW - C-BuZz - MA790FXT UD5P - F3B - failed
0920GPMW - C-BuZz - MA790FXT UD5P - F3K - failed
0920GPMW - C-BuZz - MA790FXT UD5P - F4 - failed
0920GPMW - C-BuZz - MA790FXT UD5P - F5C - failed


[ 0921APBW ]
0921APBW- charged3800z24 - MA790FXT UD5P- F3K - success
0921APBW - Davidw8818 - GA MA790X UD4P - F5 - success
0921APBW - cdawall - Asus Crosshair III - BIOS 503 - success
0921APBW- JPM804 - MA790XT UD4P- F4G - success

[ 0921APMW ]
0921APMW - Jerry Rob - GA MA790X UD5P - F5a - failed
0921APMW - Balb0wa -GA-MA790FXT-UD5P-F3K - success

[ 0921APAW ]
0921APAW - gOtVoltage - MA790X UD4P - F5A - success
0921APAW - HondaGuy - M4A79 - 1062 - success
0921APAW - Balb0wa - MA790FXT UD5P - F3K - success


[ 0922APMW ]
0922APMW - lamby_splendid - dfi790fxb m2rsh - 0310 - success
0922APMW - Lucky_n00b - ASRock M3A790GXH/128 - P1.10- success
0922APMW - C-BuZz - MA790FXT UD5P - F5 - success
0922APMW - jameskelsey - GA MA790X UD4P - F5 - success
0922APMW - Team Vernia - GA MA770T UD3P - F2c - success
0922APMW - namegt - DFI 790FXB - ?? - success
0922APMW - FrOzE - MSi 790FX GD70 - 1.4b4 - failed
0922APMW - Hazzan - cdawall - Asus Crosshair III - BIOS 503 -success

0921APBW , 0922APMW this 2 model have a good chances to succesfully unlock into quad ...if you're 0920GPMW owner... you might havin bad luck on unlocking


if you are using 790gx g65 , try this bios 100% working with aac
http://www.coolaler.com.tw/toppc/BIOS/7576142M.rar




huhu you downclock ? y not 3.1 but 3.0ghz

This post has been edited by MarlboroFreshMint: Jul 31 2009, 04:40 AM

because i want low voltage

I using the same processor and same board wit u and i successfully unlocked to quad, the only problem is my vcore, stock vcore 1.35v(bios), 1.384 full load at windows, try to lower the vcore but the processor was not stable, right now stable at 3.4ghz using stock vcore. temp are good cuz nvr exceed 45'c. Not dare to oc higher cuz really dun wan pump more than 1.4v for 24/7 usage.



This post has been edited by ~Guyver~: Jul 31 2009, 10:56 PM

Just got my TA790GXE-128M and 550 BE, will be flashing to the modded BIOS soon and see if I get lucky.

This post has been edited by colinwong89: Jul 31 2009, 09:04 PM

bro...did you bought 0925 batch???

keen to see the result..........

Yup, 0925APMW.

Able to boot with 4 cores enabled with a bit of voltage boost but the 2nd worker thread dies right after starting the
test. Funny thing is, when I force tri-core the 2nd worker thread also dies as well. Maybe I'm not doing this properly?

This post has been edited by colinwong89: Aug 1 2009, 12:00 AM

0925apmw from vrz:



Sos Cili Pedas

could be 2 cores also not healthy enuf. say 2 healthy cores & 2 sick cores, scenario could be like this (logically):

core 0 (worker1) = healthy > ok
core 1 (worker2) = bad > fail
core 2 (worker3) = bad > fail
core 3 (worker4) = healthy > ok

disable 1 core (assumin 1 bad core disabled)

core 0 (worker1) = healthy > ok
core 1 (worker2) = bad > fail
core 2 (worker3) = healthy > ok


dun give up 1st, try to play w/ diff acc value mite help. all d best...

This post has been edited by ah_khoo: Aug 1 2009, 12:15 AM

Well, my case is currently like this:

Four cores:
Worker #1: Runs
Worker #2: Fails
Worker #3: Runs
Worker #4: Runs

Three cores:
Worker #1: Runs
Worker #2: Fails
Worker #3: Runs

Anyway, how does ACC values affect overclocking?

my bad... it could be d case vcore not enuf only...

diff chip need diff acc value, but commonly used one are +2%, +4%, -2% or -4% from what i observed.

Thanks ah_khoo, will try around and see if there's any improvements

erm...I unlocked my x2 550BE before....was trying out everest 5.02 with prime95
suprisingly, the cpu temp went haywire...shooting all the way to 70C.
so it is normal for an unlocked processor to give this readings?

what board eh?with my biostar ta790gx 128 (i hope the same since ur sig said so)
if i unlock, the cpu0,1,2,3 sure messed up..become 0 all of em
but my TMPIN2 if giving me the right reading i guess...

This post has been edited by kuntawakaw: Aug 1 2009, 12:33 PM

Bro , I try to format yesterday already.

So far , restart not yet to blue screen now =.="

I send my MINiDUmp files forumer to check .

He said the problme is