Outline ·
[ Standard ] ·
Linear+
AMD® Socket AM3 Unlocking 4th CORE Thread ~, Those Who Have Tried,Please List it HERE
|
makoshark
|
 Apr 23 2010, 12:02 AM
|
|
QUOTE(fatalynx05 @ Apr 22 2010, 09:20 AM) the aspect u have to look is not only volt...ur cpu-NB, HT and RAM bla...bla... also... u should post ur screen shot here...maybe the senior might help...  64c is consider high for 24/7 usage  is it ur room temp or ur casing ventilation cause that  if that so, my temp 62c is consider high too, i dnt know wht wrong with my system, i open my side panel & my temp still 62c at load, maybe CM TX3 not good enough to cold down my cpu,need to upgrade mybe CM 212+  |
|
|
|
|
|
fatalynx05
|
Apr 23 2010, 07:48 AM
|
|
|
QUOTE(makoshark @ Apr 23 2010, 12:02 AM) if that so, my temp 62c is consider high too, i dnt know wht wrong with my system, i open my side panel & my temp still 62c at load, maybe CM TX3 not good enough to cold down my cpu,need to upgrade mybe CM 212+ what fan u using? is it dual fan setup or single? iam using hyper 212+ on 3.7ghz v1.41 full load 53c idle 38c-40c using 2X120mm CM sickle fan i think must be ur casing enviroment @ room temp  |
|
|
|
|
|
makoshark
|
Apr 24 2010, 12:35 AM
|
|
|
QUOTE(fatalynx05 @ Apr 23 2010, 07:48 AM) what fan u using? is it dual fan setup or single? iam using hyper 212+ on 3.7ghz v1.41 full load 53c idle 38c-40c using 2X120mm CM sickle fan i think must be ur casing enviroment @ room temp just install CM 212+  i only use TIm that come with the cooler, is ok to use it?
Added on April 24, 2010, 1:24 amfinally got improvement since i change to CM 212+, max load at 54c temp  This post has been edited by makoshark: Apr 24 2010, 01:24 AM |
|
|
|
|
|
fatalynx05
|
Apr 24 2010, 10:00 AM
|
|
|
QUOTE(makoshark @ Apr 24 2010, 12:35 AM) just install CM 212+ i only use TIm that come with the cooler, is ok to use it?
Added on April 24, 2010, 1:24 amfinally got improvement since i change to CM 212+, max load at 54c temp good to here just upgrade better dual fan later on |
|
|
|
|
|
makoshark
|
Apr 24 2010, 01:58 PM
|
|
|
QUOTE(fatalynx05 @ Apr 24 2010, 10:00 AM) good to here just upgrade better dual fan later on bro your dual fan setup is 1 blow in & 1 blow out or 2 blow in? |
|
|
|
|
|
nellowrox
|
Apr 24 2010, 06:59 PM
|
New Member
|
QUOTE(makoshark @ Apr 24 2010, 01:58 PM) bro your dual fan setup is 1 blow in & 1 blow out or 2 blow in? Pull and push method is the best! |
|
|
|
|
|
mpowerwind
|
Apr 26 2010, 08:52 PM
|
Getting Started
|
Just success to unlock a p2 x2 555 to p2 x4 b55, batch 1003gpmw. Then i run prime95, temperature directly go up to 70-71c Just using normal heatsink, will change to dark knight when free... My p2 x4 b50 running normally at 34-37c using dark knight.  Will try to spot the difference between this two [attachmentid=1548261] |
|
|
|
|
|
cyberloner
|
Apr 28 2010, 10:04 PM
|
|
|
QUOTE(mpowerwind @ Apr 26 2010, 08:52 PM) Just success to unlock a p2 x2 555 to p2 x4 b55, batch 1003gpmw. Then i run prime95, temperature directly go up to 70-71c Just using normal heatsink, will change to dark knight when free... My p2 x4 b50 running normally at 34-37c using dark knight. Will try to spot the difference between this two [attachmentid=1548261] great job... i have same core if i remember right... but haven't push it yet..... |
|
|
|
|
|
Gxen
|
May 7 2010, 08:39 PM
|
|
|
Hi, I wasn't sure my motherboard could unlock the 4th core. I just bought a 720BE. I thought that only the 770/790 edition of Gigabyte could unlock it but, well the pics says it all. Still not sure if I did really manage to 4th core it or not. [edit] Crap, my attachment not working. Oh yeah, here it is. This post has been edited by Gxen: May 7 2010, 08:44 PM Attached thumbnail(s)
|
|
|
|
|
|
makoshark
|
May 7 2010, 08:43 PM
|
|
|
QUOTE(Gxen @ May 7 2010, 08:39 PM) Hi, I wasn't sure my motherboard could unlock the 4th core. I just bought a 720BE. I thought that only the 770/790 edition of Gigabyte could unlock it but, well the pics says it all. Still not sure if I did really manage to 4th core it or not. [edit] Crap, my attachment not working. i just know 750/710 can unlock coz my mobo is 710 |
|
|
|
|
|
bopiang
|
May 8 2010, 02:17 AM
|
Getting Started
|
sucessfully unlock 1002, and 3 more 1003 for my fren, hard to get 1003 batch.  thx for tips 555BE me and all fren using MSI 770-c45
Added on May 8, 2010, 2:25 amis there any programs that can monitor the unlocked cores? all is 0.. This post has been edited by bopiang: May 8 2010, 02:25 AM |
|
|
|
|
|
adie82
|
May 8 2010, 02:51 AM
|
|
|
QUOTE(Gxen @ May 7 2010, 08:39 PM) Hi, I wasn't sure my motherboard could unlock the 4th core. I just bought a 720BE. I thought that only the 770/790 edition of Gigabyte could unlock it but, well the pics says it all. Still not sure if I did really manage to 4th core it or not. [edit] Crap, my attachment not working. Oh yeah, here it is. great that ur mobo got NVCC same feature as ACC... how much that mobo? |
|
|
|
|
|
cyberloner
|
May 8 2010, 03:32 AM
|
|
|
QUOTE(bopiang @ May 8 2010, 02:17 AM) sucessfully unlock 1002, and 3 more 1003 for my fren, hard to get 1003 batch. thx for tips 555BE me and all fren using MSI 770-c45
Added on May 8, 2010, 2:25 amis there any programs that can monitor the unlocked cores? all is 0.. Hwmonitor...or AMD Overdrive TMPIN0 = CPU temp |
|
|
|
|
|
Gxen
|
May 8 2010, 05:02 AM
|
|
|
QUOTE(adie82 @ May 8 2010, 02:51 AM) great that ur mobo got NVCC same feature as ACC... how much that mobo? Around Rm240 or less I think. |
|
|
|
|
|
maxsteel
|
May 8 2010, 11:17 AM
|
|
|
Hello guys,
May I know what batch of amd athlon ii x3 435 that can be unlocked?
Thank you.
|
|
|
|
|
|
fillmore
|
May 8 2010, 12:47 PM
|
Getting Started
|
helo im new here..
my proc is Phenom II x2 555BE batch 1003epmw
is my proc can be unlock n stable?
|
|
|
|
|
|
makoshark
|
May 8 2010, 08:44 PM
|
|
|
QUOTE(maxsteel @ May 8 2010, 11:17 AM) Hello guys, May I know what batch of amd athlon ii x3 435 that can be unlocked? Thank you. bro my X3 435 is successfull stable unlock 4 cores with 6MB L3 Cache activated batch is CACYC AC 1001GPMW Attached thumbnail(s)
|
|
|
|
|
|
maxsteel
|
May 8 2010, 09:34 PM
|
|
|
Thank you makoshark. |
|
|
|
|
|
makoshark
|
May 9 2010, 12:42 AM
|
|
|
QUOTE(maxsteel @ May 8 2010, 09:34 PM) Thank you makoshark. welcome bro gud luck for ur unlock |
|
|
|
|
Quote
0.0197sec
0.42
6 queries
GZIP Disabled