lol.. even better news.. after increasing vcore to 1.275v and vdimm to 2.000v, it is highly stable n the temperature is lovely.. haha
45,41,39,39 idle and full load 66,62,60,60

its normal n its cool right.. yay.. now im happy.. i cant overclock further d.. mobo fsb max is 1600mhz.. n btw ram is not faulty.. after increase vdimm, it din freeze.. haha

u can actually go further than the 'max official limit' of ur mobo.thats what overclocking is.

i know some people that running at 2000fsb on a '1600mhz' board.

wow.. overclocking is actually fun.. haha

may i know how do ppl do tat??

try and error!!!
you never know how well yr mobo and proc can go.
just try it

lol.. my proc i confident wit it.. my mobo n ram.. haha.. abit the problem..
anyway, its all done by jus adjusting clock n voltages rite.. multiplier locked d cannot change rite.

edited

btw, my vcore 1.275V.. isit too high for 3.4ghz.. sorry ppl.. its 3.4ghz not 3.2ghz..

wow.. another thing.. if i set vcore to auto.. lol.. my temps are higher.. wth.. its 50,47,46,48 idle.. wth

edited

adjusted to 1.25v.. stable..
hopefully wont cut short my proc life.. voltage same n temp cool.. haha

---

Added on July 23, 2009, 3:51 pmwth wth.. adjusted to 1.25v.. next morning when start com.. can load windows d.. kenot boot..
soo.. i shud up bak the voltage to 1.275v?
y alot ppl can use 1.20v n stable n mine cant?? mobo prob?? psu?

This post has been edited by jcyl2: Jul 23 2009, 03:51 PM

Reached a point where im confused..

soo my target overclock is 3.4ghz (400x8.5)
my vcore 1.25v
vdimm 2.00v

it is stable when i just did the settings and restart.. even priming and intelburntest no issues..

the problem now is that once my pc is left untouched for a few hours, den i got problem booting up windows.. it passes the POST test then just before loading windows, the com restarts then the clock all will go back to default to 333x8.5..

are there settings that i missed?? i read also that i should remove some of the auto voltages and set the default voltages manually right??

what other setting to i need to touch to keep it stable??

btw, should i touch the cpu termination voltage, and the pll voltages?? i set them on auto now..

do i need to bump up my mch voltage oso??

thanks for helping ya

How long you stress it?

-pWs-

10 cycles of intelburntest.. 1 test abt 70 seconds.. soo about 10 minutes
well.. shud be quite long enuf d rite

Stress more bro. 10 mins frankly is not enough.

-pWs-

okay.. i think my cpu stable... its just tat when left for a few hours, when going to load windows, it will restart den the bios will change it back to old settings..

Do you update to the latest ver. of your bios?