u r not using raven?

btw, 2day update.. *2nd, ~shit do happen~.. 1x when my 4870x2 screw broken inside (thrade) mcw60 block.. alrdy remove it by drilling using M3 drill bit i bought yesterday at jln pasar.. now for 2nd time, my flexshaft snap inside .. im force my flexshaft to hard..



how to remove the shaft inside? alrdy 'ketuk2' but still cant remove the balance.. btw, do this shaft got spare..?



the base i made b4 this.. just for try n error..
*idea been use for tom jonet, since it work.. i hv re-apply to this raven..



it broke, when i drill hole.. maybe bcoz using 4mm acrylic

since it fit nice inside raven, i hv made 1 more. using 6mm acrylic..



this is when my flexshaft snap..



how it will be place inside raven..

-------------------------------------------------------------------

haha.. got a old pic of my block n tube inside my hp..





-------------------------------------------------------------------

pic of my sleeving yesterday.. *still need to wait for my digicam to return back.. it nice looking sleeving what i can say..

Yes, i am

really wanna crazy after see u post...

i also want to mod my raven.... ~~~ to... no idea yet~

r u screwing to hard ???

how come screw can broken?

This post has been edited by Omnia: Aug 14 2009, 09:47 AM

raven user here...so tempting when see ur work!!!

so nais...

arghhH!!! cant wait for update...go bro!!..

seriously nice mod!!

currently im want to hv dual psu.. n still on mod that 2nd psu.. my plan is to

1st psu st da770w to pwr up mobo/proc n gc only..
2nd psu thermaltake 430w, to pwr up hdisk, dvdrom/writer, pump n other..

im doing dual psu is coz, when single psu (750w) got buzzing sound when plying GRID.. maybe my 4870x2 need more ampere

will update it later..

750w still not enuf

the electric bills of yours must be high

i think bcos ur stressing d PSU dat's y la .
bad batch of PSU ?

dual panel ?!
lookin forward ur job,bro

not sure it enough or not.. but the sound it really annoying, so better try to hv dual psu n i hv plan to put 6pcs hdisk..


never stress my psu.. but alrdy serve me well for nearly 2year change a a lot of rig.. but this psu still with me

not dual panel bro.. but dual psu.. btw just saw ur sleeving skill (u sleeving ur sata cable)



------------------------------------------------------------------------------------------

since my digicam is back.. so i will upload the sleeving n the secondary psu.. n might be a guide to do sleeving..


the psu i buy.. if 1st owner see it.. it alrdy been operate haha..





the cable n switch..



where i plan to ut this 2nd psu.. near the hdisk bay.. n dvdrom/writer..

-----------------------------------------------------------------------------------------

sleeving ...

here the 8pin sleeve that i hv alrdy made..



how it will be look like..



--------------------------------------------------------------------------------------

how i do the sleeving...



tool

i hv alrdy tape the atx pin with tape, this is to avoid cable stuck inside sleeve..



i shrink the 1st heatshrink at the end of sleeve, using lighter (dont burn it direct, but just move2 only).. !! dont touch the heatshrink when it still hot.. coz u will make ur fingerprint on it.

*do use a sharp 'gunting' to cut ur sleeve, n burn a bit at the end (both end) after u cut the sleeve.. !!do measure ur sleeve wise b4 cut it.. if not, it will be too short or too long..

**how the measure- do hold the edge of cable side by side with ur sleeve, then pull the sleeve with cable !!this will give u nearly accurate length for the sleeve.. u really need to pull (tarik) it.. coz need it to hold tight to ur cable when u do this sleeving..



i put the 2nd heatshirnk.. n burn it..




how it look with both side been shrink..

---

Added on August 18, 2009, 10:19 pmmy other fitting is on the way.. so by next update might be doing wc n pwr up 2nd psu (just for testing wc).. hehe..

the sleeving, on long delay for it.. so i will use ori da750 cable temporary.. coz need to use the balance to sleeve my 2nd psu..

This post has been edited by sopen2003: Aug 18 2009, 10:19 PM

wah,u let the PSU nake danger anot ?? :
my sleeving skill is worse than u :sweat

hehe.. not naked lor.. it will be mod, n i will fix a cover for it.. plan to hv intake fan in front of it..

skill can be improve bro.. practice it.. btw, i will do a sata sleeve also, but will be a long delay for it.. coz awaiting the sleeve

This post has been edited by sopen2003: Aug 19 2009, 03:10 AM

all ur stuff also high end 1,raven ,wc ,muder sleeve
i just usin ayam brand

This post has been edited by lun1986: Aug 18 2009, 10:36 PM

practice with ayam brand 1st bro.. if not u will burn ur money by noting..

sleeving is hard to do.. for my case, it look easy coz im make new connector for it, n new cable for it.. so easy, n not hard work to pull out those cable (if sleeve ori cble)

one trick to shrink the heatshrink is to use the solder pen...
works great.

with lighter i always burn up the sleeve together... but with the solder pen... it can be done in less than 1 minuted
just put the solder pen to the heatshrink and it will shrink up...

very nice .
keep up d good work .
looking forward to d final result ^^,

also try to use solder b4, yup it burn/shrink nice compare with lighter.. but it slow (solder not too hot maybe, might be those watt issue).. haha.. n some time if not careful, will melt those sleeve.. .. happen when im using solder pen.. i think by using adjustable (heat) solder, will be fast n nice..


@monsh

thank's bro..

Wahhh! Nice modding skills!

some item i buy from lun1986 nice plate.. 2.8mm alu plate..

thanks bro

update..

i hv to re-do some alu work, since b4 this only use 0.8mm alu plate, need hard alu, coz need to hold power plug..

and need to build psu holder, n some beam to hold my left/right raven frame..



thank's to lun1986



2.8mm alu plate.. this can be a costom made mobo tray?? some idea if some one like to make own case..



for the psu holder..

n some drawing for psu/rad hole cover.. to replace the ori 0.8mm alu plate.. beam to left/right raven frame..

*this might make ur guy's confius.. but stay tune..



im heading back to sg buloh tonite.. will do an update by monday...

for all muslim, selamat bpuasa.. rebut la ape yg ade dlm ramadhan..

Nicely done, very skillful and artistic hand you got there.. =)

yesterday update.. alrdy cut in to shape.. but need to do some adjustment (got an offset)

btw, im using jigsaw to cut it..





how the psu/rad cover will be place..



the beam, where i plan to put it.. coz i dont hv rivet n rivet gun.. will postpone this job till got the gun..

2day update.. i alrdy test the 2nd psu.. it work..

n nearly finish to make it cover.. using acrylic, the front cover will be make after final design be made.. temp im using double sided tape..





this psu only to power up my hdisk n dvdrom/writer n if got other acc..

This post has been edited by sopen2003: Aug 24 2009, 05:52 PM