ht link @ 1.6GHz is a must, d rest just leave it untouched other than ACC. that's what i did when i unlock d xtra 2mb cache.

u can turn of d green power utility as well if there's any oc done.

Miahahaha, any AM2/AM2+/AM3 cooler can ler, if u want to use a CM Hyper TX2 pun still also can, the bracket eveything still the same

Hoho. Biostar utility reports 72degree when loaded.

Good to hear that.

-pWs-

@cloudwan,

Using the 78DAA629 Bios.
After i save and exit , it direct hang. blank screen.

What setting you save?

-pWs-

dark knight is gud but d orientation is .

ccf for me or is there any zerotherm fs120 available there in lyp?

CCF look ugly.

-pWs-

1. flash bios 06/29/09 usin t-series bios update software from d cd, get d bios file here: http://www.lejabeach.com/Biostar/TA790GXA3+/78DAA629.rar

2. Press DEL to enter to Bios

load optimal default after flashin done

3. go into bios, set ht link @ 1.6GHz

4. set advancne clock calibration to all core @ -2%

5. save & reboot

After i save and exit , it direct hang. blank screen.

This post has been edited by twinkles: Jul 28 2009, 02:49 PM

Ermm. I do the same as you. No problem.
Could it be your processor cannot be unlocked?

Unlock success before?

-pWs-

Miahahaha, they are kinda ugly but what bothers me most is it feels kinda cheap

haiz.... Window got any influences?

Using WIndow Vista now.

Duno... Yesterday just bought this pros =.="

Where did u bought the cpu? If u bought from rockrock usually u can ask him and he will tell u if the cpu can be unlock or not

come join d mugen 2 club then...

but it's not recommended for those who like to swap chip very often. like me for example...

swap chip = remove mobo...

he told me that got percentage to unlock.
Not sure is me using wrong method or it cant be unlock.

Any willing come to my place to try over this things ?

Update:
3400MHz (200 x 17)

CPU Temp: Idle 52degree Full 72degree



-pWs-

Kinda hard jugak like this, have to try on other mobo's too maybe..
Wish i could help but i'm living in the land far far away, only xixo is living much further than me

---

Added on July 28, 2009, 3:04 pmMiahahaha, x mau ah like that, the ccf looks a bit ok ler after i change to a Xigmatek orange bling2 fan

This post has been edited by cloudwan: Jul 28 2009, 03:04 PM

So what i should do now ? Keep it like this or ?
Now back to the screen already

This post has been edited by twinkles: Jul 28 2009, 03:06 PM

I'm soooo jealous looking at ur rams bro

This post has been edited by cloudwan: Jul 28 2009, 03:09 PM

gimme more bro, i want 3.6GHz < 1.35v...

ccf can't do push-pull...

Demmmm i know
But nak buat push pull also got no space already