incredible.. after flash BIOS also same....

is it suppose to be 1.39v???? and ram 1.9?

Bios came with F2 and I flashed to F5, flash back to F2 and vcore return to normal. But ram voltage still 1.9..

refer pic below.... at 3.3ghz.. is the temp too high for 24/7 usage?? this is idle/normal use temp.




Attached thumbnail(s)

dunno how to make 3.4ghz work.. tried many tweaks.. so far now ..3.3ghz..




Attached thumbnail(s)

How to change to 2T??

many things happen when i tried 3.4

BSOD, restart, finally then i get it to run prime95 only having stop worker...

ps: nvm, i increase to 2T already. lets try prime~

This post has been edited by yvliew: Aug 11 2009, 06:43 PM

guys.. TMPIN 1 max temp around 61c.. too high??? my vcore to 1.39 now..

tried prime again blend, error and 1 core stop working. I try small fft, BSOD....

what can i tweak more?

pls tell me b4 i Kill something..

what is the highest temp my board can handle??

TMPIN 0 - 43C
TMPIN 1 - 63C
TMPIN 2 - 58C

Core 1-3 = 59C

20min priming on 3.4 no error.. but I decided to stop it, temp seems higher than my liking....

I will need better cpu cooling and case cooling if I will go for 3.4ghz above..

What u guys think of Cooler Master V8 cpu cooler? and how about Xigmatek HDT-1283 ?

What's the difference between those 2?? I can get used xigmatek around 100... V8 someone in the forum selling 235..

what is ur cpu temp idle and load??

we actually see the core 1-3 or see the cpu temp?? which is tmpin0 or tmpin1??

then i think something wrong with the sensor.. when it was full load, my core 1-3 around 60.. but tmpin0 only 45-50... shouldn't the cpu temp higher than core1-3 around 5-7c?

u mean idle is 45?? if idle abit high...

well that's my own liking la.. i prefer idle around 30+ only..

what modem r u all saying? adsl modem??

what is router?? will have this risk?

maybe irrelevant here, but dunno where to ask... how come faster than 4870??

or it should be lower the better?????


Attached thumbnail(s)

i regret on getting this motherboard without doing more research.. no ACC to unlock 4th core~

guys, mind to share what are your board max wattage can handle?? I ask this because Phenom II X4 965 is coming soon and its 140w..

---

Added on August 14, 2009, 12:27 pmX4 945 still 95w.. he still can use it...

This post has been edited by yvliew: Aug 14 2009, 12:27 PM

guys.. this is full load temp......

TMPIN1 shows 60+C .. I suspect that is CPU?? while TMPIN0 only around 39c.. and TMPIN2 should be NB? can anyone confirm it??




Attached thumbnail(s)

can someone help me identify the TMPIN pls??

Anyone here using Cooler Master Hyper 212 PLUS cpu cooler?? How's it compare to Xigmatek 1283?

wah.. OC oso can kill PSU?? How come??? Im stucked at 3.4ghz.. tried 3.6 keep on BSOD.. dump wat wat.... or restart... already add vcore to 1.425..

the 4ghz using wat cpu cooling??


if everyday is as cold as today....no need change cpu cooling already... haha



This post has been edited by yvliew: Aug 17 2009, 12:58 AM


Attached thumbnail(s)