Thanks bro, nice knowing that you get the effect that u want.

Sent you more info.

Waja and satria should require almost the same amount of the flex mat...

Floor~ should be around 15 flex mat

Door will depend on how many layers you plan to do.... 2 pieces for 1 layer....

Bonnet, what do you mean by this?

Ok, call me K.S or Kheng Siong is fine....

Why your questions are in Bahasa Malaysia... but then you refer me to a chinese website???

Bro, the inner panel holes one I will not be responsible har .... because I use Flex Mat for that area.

For fenders, you will need Noise Plug, Propad and Insulflex kind of materials....

Can you suggest me soundproof material for following area:
1. Bonnet
KS> I'm assuming you are talking about front hood. Then you can use 1 piece of HoodLiner will do.

2. Door
KS>This will depend on how many layers you would prefer. Non-ICE, then you can do 2 layers
Total 4 doors = 2 x Propad, 2 x Suppression Pad and 4 x Flex Mat... And also insulflex, which I do not sell.

3. Cabin Floor (fron to back--meant "under firewall" to "under back seat"
KS>If you have heat gun, then you can use 2 x STP Visomat PB2. If not then you can use around 2 x Dampening Mat and 1 Noise Absorption Mat.
For firewall then you will 4~5 pieces of Flex Mat, but depend on what car you are driving. Waja size might need 5.
For the flooring, there are some specific area that PB2 or Dampening Mat cannot cover... If you wish to have it covered, then you might need ~6 x Flex Mat.

4. Trunk Area (floor, side&inner lid)
KS> 3~4 x STP Vibroplast or 4~5 x Flex Mat. These should cover the side as well, all depend on what car are you driving. Inner lid? No recommended, but if you want, then I need to know what car are you driving.

Im very particular in NOISE, but not ICE fever,Just wan2 make my car as quiet as possible.
KS> Soundproofing is not only for ICErs, normal daily usage will be very helpful too... The less NVH you have in your car, then less tense you will have driving it daily.

Pls give the best solution& price too..
KS> Solution provided. Price is on the first page, negotiable depend on which package that you are going for.

New vios ..... front hood.

Can opt for HoodLiner, open cell with self adhesive.

It will depend on how many layer you plan to do... and what material you would prefer....

Normally I recommend 2 layers. Using Propad/Suppression Pad and Flex Mat/Insulflex.

Would advice you to budget how much you plan to spend....

1 piece rm 250. 1 box rm1048.00, 5 pieces in a box.

---

Added on December 11, 2010, 7:38 pmSorry ,i do not provide installlation. You will have to try other sellers.


This post has been edited by MyWifeCar: Dec 11 2010, 07:38 PM

It depends on how many layer you would prefer to do...

My recommendation:
2 x Propad
2 x Suppression Pad
and 4 x Flex Mat.

Ok bro... but Iswara is no much diff. from City or Vios....

If you want something like InsuDamp, then Flex Mat is the same kind dampening material.

2 pieces for 1 layer...4 doors will require 8 pieces.

But if you purely want deadning, actually Propad or Suppression Pad is sufficient... At least that is what I would do.

Ok. Best price pm you.

I have all stp materials, just let me know which materials that you prefer.


1. I have 2 types of hoodliner. With and without the aluminum layer. Rm100 and rm200.
2. You can go for my rm500 package.
3. I don't really have a solution for this one. Best is if you can change the exhaust.

Best price:
Front rm200
Rear rm100


Sorry, insulation foam not available. You can try insulflex from other sellers.

Ok...will see if I am free. What time?

now headache wanted to sell off my Genesis Dual Mono...

If the bitumen one, yes.
If the foam one, no.
And I do not recommend to apply foam with adhesive on the floor, due to the same reason.

If your car got leakage, why not you fix first then only soundproof?

Doors are always the best way to start... But for BLM, front flooring and fenders can be improved.

Enough difference to know that this is what soundproof can reduce the noise for your car.

My materials no need ca glue. Why wanna suffocate yourself with ca glue when there are other cheaper and same application method, while using the same materials?

To cut down engine noise, I do not think there is a easy DIY .... Somemore diesel engine is quite noisy....

Anyway, 0123025842. I guess weekend morning is the best time for fresh explanation.... Let me know of your availability.

Please go to the 1st page, there is a list of successful sale conducted. You may PM them for further information.

Some of them are from Penang too, I courier the whole item to them.

Hi, sorry...cotton mat is not available at the moment. I will substitude it with HoodLiner instead.

HoodLiner can be applied on door trim, 1 x HoodLiner enough for 2 door trim. It comes with self-adhesive, it is 10mm thick and open-cell.