wow that's a killer

currently i'm running 290*9 at 1.7V... load at 41C... i'm thinking of pushing 300*9 but worried it'll be hot now thinking of w/cooling

so which one is better? tccd or UTT? ever try loose timing to get higher fsb?

my UTT can't go any higher than 271Mhz at any timing. Haven't played voltage though.. takuts...

from my experience...

290MHz 2.5-4-4-8-2T

is almost equal with

263MHz 2.0-2-2-5-1T

man ur utt is quite good ler, mine sucks big time 250 error free at min voltage 3.3V. higher can get at least 255 but error ridden

Improved my timings....heres what I got

demn... prescott powerr!

ian.ho congrats!


ur mach2 sure did come in handy...


edit:
im sure ur suprpi is patched??!

it's not patched, if patched the software heasding will mention patched

going with the 925 chipset adeee! i dont think anyones gonna match ur speed, i dont remember any LGA users here with 925 chipsets... hehehe..congrats!
mines patched and yet it doesnt state at the heading.
it would be way too amazing if ian's numbers isnt patched.. he could hit 20secs then!!

dont think it matters too much even if his prommy explodes!! *touch wood. he could even craft his own phase change sytem!

This post has been edited by prancingHORSE: Feb 14 2005, 03:26 PM

can u tell us the ram setting? speed and timing?

the rams is runnning 1:1...which is 600Mhz 4-3-3-9. The rams can do 720Mhz too but at 4-4-4-12.

ok...here are some initial benchmarks done





couldn't summit them as i have not install the latest patch for both of the benchmarks.

holy cow....
wat GC ur using? ur 3D Mark scores are higher than ARJ's!
ur using the X800XL as in ur sig ar?

nice numbers ian!
but ur a bit lost aint ya?
this is the superpi thread! we've got 3dM threads stickied, post em there and watch ur name go number1 =D

yea, hes just replying to a request and also like he said...has not posted on the orb.

so the moral of the story is?

Best so far Super Pi 1M@47s

P4B@3.335Ghz 1.6Vcore 145Mhz FSB 1GB@2.5-3-3-6@385Mhz

The el-cheapo corsair VS can only do 2.5-3-3-6, my Kingston Value did 2-2-2-5 no sweat.




Attached thumbnail(s)

Super Pi 1M @ 37secs

cpu : athlon xp-m 2600+ @ 2555mhz
ram: 2 x 256MB khx3200 @ 2-2-2-11, 255mhz dual channel

Not bad dude! Same as my S754 at 2.3x GHz!

thanks

now trying to get 260x10...but seems like my ram is not very stable... need more vdimm maybe

Can I suggest we all use this modded superpi to show the milisecond instead?

It's hard to differentiate with progress of each user with the regular one.

http://www.radeonx.com/super_pi_mod.zip