Outline ·
[ Standard ] ·
Linear+
Hardware Mac servicing, emergency tips, General knowledge on Mac issues
|
nefashu
|
Jan 11 2021, 10:48 AM
|
Getting Started

|
Hi, I got Mac Pro mid 2010 single cpu.
Mac pro can turn on all fan spinning but no display.
No chime sound when boot and diag led on gpu ok is blinking.
I try to remove all ram, no beep sound remove gpu, no beep sound remove hdd and cd, no beep sound
any advice? thanks
|
|
|
|
|
|
nefashu
|
Jan 11 2021, 11:07 PM
|
Getting Started

|
QUOTE(wei @ Jan 11 2021, 11:12 AM) Any click sound and red LED flashes when you turn on the main power? Not the power button but the plug to your power outlet. the power outlet is fine. I have try with 3 different power outlet.
|
|
|
|
|
|
nefashu
|
Jan 11 2021, 11:09 PM
|
Getting Started

|
QUOTE(wei @ Jan 11 2021, 11:12 AM) Any click sound and red LED flashes when you turn on the main power? Not the power button but the plug to your power outlet. got led blink once inside the mac when turn on the power outlet
|
|
|
|
|
|
nefashu
|
Aug 18 2021, 11:18 PM
|
Getting Started

|
I got Mac Pro 2010. Cant turn on and no beep sound when I remove RAM. Suspect mobo problem.
GPU work fine as I test it on my pc.
How much to fix it and is it worth it?
This post has been edited by nefashu: Aug 18 2021, 11:19 PM
|
|
|
|
|
|
nefashu
|
Sep 2 2021, 05:22 PM
|
Getting Started

|
QUOTE(eddyann @ Sep 2 2021, 03:20 PM) most likely the mobo, the rest normally wont be easily faulty. the thing u can try is to remove everything leaving only MOBO. clean it with electronic chemical for any dirt or slight correction at the contact pin. In my case I use a degreaser a bit harsher but it is up to you. later I rinse the mobo with a spray water to remove the chemical, then leave it dry or use a hair dryer. then try assemble everything see if it is can be turned on or not. if is still fail, last resort I normally put the mobo in the baking oven 175-200C at most 7 minutes. any reason why u need to bake? and how much for replacement?
|
|
|
|
|