Hopefully can fit in...Cause I dowan to bend the cap again

supposely can, u should dun tight 1 side oni, mean u must tighten both side, ok now divide to 2 side A n B,
screw in side A until half, screw side B, thn cont screw side A to nearly tight, thn screw side B to nearly tight,
aft that tighten the side A and side B, do it side by side
dun screw in all in 1 time

Em thinkin of downgrading from 4 cores to 3 cores, if u know whut i mean
Sooo any good AMD cpu dealer can do postage?? Ke u mau belikan ah_khoo

This post has been edited by cloudwan: Apr 9 2009, 10:59 PM

ThermalRight Ultra 120 Extreme..

None help me to put

@xiukeong
i think u better read the manual again.. coz my case is same like yours.. coz i use ac too.. but mine not so bend la

@xiukeong
huh?? cnt meh? is wat prob ar?? it bend too much until cnt screw in?

@sarah
how u put ur FM123 on ur AC? can show here some pictar

Cause I've to secure 1 side then only the other side

does u try out the way i suggest? i thk better dun screw 1 side all and thn another side, this is not a good idea

I afraid it'll affect the thermal paste that I applied on it.

try 1st.. no try how u noe? once u can tighten ur cooler properly, the TIM suppose can spread evenly oledi;
if u fail to tighten em evenly, or cooler stand not well, the TIM not spread evenly, the heat cnt conduct nicely,
end up the temp was not so frenly..

so u js try it up..

Which processor is worth right now?

-pWs-

Is there any way to make my Xigmatek Cools backward?Now,my HSF is head-head with my GPU
I want to make it heading the PWM instead..

AMD

not sure ler..~ seem got some KITs for it.. but gotto order i thk...

AMD what model bro?

-pWs-

ahaaa... gatal nak try x3 720be lah tu....

any amd chip...

great minds think alike...

unlockable x3 720b.e + jr 790gx = pwnage bro...

btw, manage to bring down some voltage again...

@cdlim87
easy bro.. just replace the ac fan with the fm123.. no need to screw or lock..

@xiuekeong
the mounting device u put at the top or bottom ? the 2 seperates thing.. i dono what it call..

Any stock of 720BE den?

-pWs-

I put the btm 1st then only put the top. But once I secure the btm, cannot do the top liao.

pWs, u got ur ans rite? ah_khoo showing some thing for u..
get a x3 but it can bcome x4
the ans i ans is special for the ex-amd maa

really? not that the ori fan is bulat bulat? so u js drop in the fm123 with any thighten it? no vibration keh?

---

Added on April 10, 2009, 1:36 amlast time i oso wrong screw the top n down thingy, at last gotto see the manual, u js follow the manual will do..

This post has been edited by cdlim87: Apr 10 2009, 01:36 AM