up NB freq? or u up vNB? how the ram freq? but i belive KHX can tahan OC kua.. wat ur vCORE u set now?

bro.. follow the guide.. wat u no understand now? i got write something for u b4 rite? a small guide..

yes i up the NB freq and not the vNB, vcore remain at 1.4, ram at 550mhz. weird tat after i up the NB freq and prime stable for 30min and currently still prime-ing

haha really with this chip.. higher NBfreq stable thn lower 1... its ok... js move on, as long as sys stable that will be good enu..

and remember NBfreq will help in performance, so if can get stable higher NBfreq is a good news to u..

haha ya i also feel weird about tat. anyway i'll prime until 9am and see if it's stable. wish me all the best.

---

Added on April 19, 2009, 2:45 amis my full load at 55'c is safe?

This post has been edited by zerohunter: Apr 19 2009, 02:45 AM

this temp no prob

yeah den i'll prime till 9am. anyway bro, how's ur oc?

hoho... my stable OC around not yet reach 3.4GHz thou... KVR
but still got ppl get stable even with KVR at 3.4GHz spec almost same with mine.. mobo diff only..

is the other guy running on dual channel? as i see tat u only running 1 pcs only. correct me if i'm wrong

ya.. 1 single channel thats y now looking for another stick.. LOLz

i'm always tight budget, so still not effort for getting high-ended stuff

Juz now try reset the cmos..actually its work..no bsod after try oc with juz 5% using the Overclocking profile on cmos...b4 tiz,even 3% bsod d...

btw,after few minutes of usage...my pc hang.... my mobo bios really limited...sigh....

---

Added on April 19, 2009, 3:14 amCan i know wat software u using bro? or u tweak at cmos? i have no idea how to oc the ph2 with my cmos...if i show u my cmos,can u help me?

This post has been edited by nazseha: Apr 19 2009, 03:14 AM

most probably is limited by ur mobo IMO...

ur mobo js supported for Phenom/PhenomII but not fully supported for Phenom/PhenomII OC

if u really wan to try OC, its ok.. now looking in BIOS for:
-cpu clock multi
-HTlink multi
-NBfreq multi
-RAM setting
-HTT (ht reference clock)

look into bios see either u can found all these or nt? state here wat u found.

and post here ur stock speed cpuz ss (4 tab:cpu/mobo/ram/spd)

ASUS guru in action...

Looking for GOLDEN SELLER is it bro cdlim...

This post has been edited by verdict: Apr 19 2009, 03:18 AM

its call BIOS do as wat i told

---

Added on April 19, 2009, 3:18 am guru is not me.. i js a student... the guru now still tidur

golden seller

This post has been edited by cdlim87: Apr 19 2009, 03:21 AM

Roger bro...wanna take ss awhile... Thank you very much....

Here it is bro....

This post has been edited by nazseha: Apr 19 2009, 03:42 AM


Attached thumbnail(s)

CPU Overclocking option : changed it to manual...

Then others option will change automatically...

Others you have to change it by ur self...all da best...

do more revision bro...it will help you on your issue...

Self learning is a must in OCING WORLD...

This post has been edited by verdict: Apr 19 2009, 03:43 AM

this is at stock speed huh? something wrong with ur HT freq, only 1000MHz..

ur BIOS almost same as mine, but y u dun hv HT multi. i'm pretty sure u dun hv NB multi..

as verdict told, u change cpu overclocking frm auto > manual

u will see the HT reference clock, that will be ur HTT.. stock 200, increase it to gain higher clock..

and where is ur cpuz ss.. ?

edit:
now i can feel that ur bios either still hv bug or ur board not really suite to OC PhenomII..

HTlink suppose not 1000MHz only...

back to old story, IINM u said b4 this u OC 6000+ stable at 3500MHz rite?

mine so share wat setting u put?

This post has been edited by cdlim87: Apr 19 2009, 03:48 AM

oh..thank you for ur reply....

erm...juz easy settings at bios , up the clock, pcie 100 , and memory 533mhz...others is auto..like example my vantage post here.. http://forum.lowyat.net/topic/685025?author=nazseha

btw,tat not for 24/7...takut something bad happen...so i stick at 3.4+Ghz..as long can survive orthos for 1 nite...is ok for me....

This post has been edited by nazseha: Apr 19 2009, 03:55 AM

ok, now let me tell u wat my opinion.
IMO, ur board oni supported to use this PhenomII or even Phenom chip but unable to OC em. y?

frm the ss u post, ur HTlink tie to 1000MHz and NB tie to 1600MHz only instead of 1800MHz(IINM) for both..

ur board is born for AM2 not for AM2+/AM3, so the support of the HTlink/NBfreq is limited by ur mobo.

so wat i thk is the BIOS is write to tie thm down to force this board to running em on...
so its consider not fully supported and not fully supported for OC too..
u can noe when it running this chip not at the stock speed of this chip. only cpu speed at stock but HT/NB r not.

in conclusion new mobo is require to run this chip.

if u really really want to OC this chip,
u gotto find a way out to lowing down the HT/NB multi of this chip frm x9 to x5 or lower so that u can start OC em..
(ur bios now tie HTlink at x5 NB at x8)


** all my opinion will consider wrong if this is coz by OS compatibility prob, but i belive it was not, coz the cpuz show the same with wat showing in ur BIOS

huhu...very well explained....really2 appreciated it.....

rite now really no money to upgrade mobo d...

have to think another way to lowing down the HT and NB multi eh? even my bios cannot do this... so do u mean by another software?

btw,thanks again for ur explanation..now i really have an idea how the phenom oc works..thanks..