yeah..tats y...wat software tat support nforce chipset punya...i really no idea even to google it....

read tiz thread so many times d.... http://www.xbitlabs.com/articles/cpu/displ...ng_3.html#sect0

pening2....

finally, 3.3GHz is done on air + some helps from d air cond...

considered crappy coz i see some can do much better, but nonetheless, my goal is achieved.

Ram speed a bit slow bro.

-pWs-

yup bro, still workin on it... gimme sometimes... this oldman big girl is slow...

will try to bring down d volt 1st, > 1.5v is not healthy for sure...

This post has been edited by ah_khoo: Apr 19 2009, 12:43 AM

And the temperature is 40c at 1.536v is good. =)

tis is my current result. still running prime test.


Attached thumbnail(s)

HT link is too low bro. Try to set it back around 2000.

3.5g@1.1vcore

-pWs-

Yeahhh...that is how big gurls do their thing...

Go Go Go sis ah_khoo...

use "G" power...yeayyy...

now seem like 7750BE on war now..

yeah nice..

its ok.. let push to highest clock b4 isolate each..

ya. its wrong reading frm software.

@ bro zerohunter
sry ya. i js remember that yest i got post a review thy OC 810 and 720BE using ASUS M4A78T-E,
the 810 show lower vCORE when thy OC'ed over a certain point... so i thk this may a bug, js ignore it.. but if u wan try format its okie too..

some time is OS compatibility problem..

This post has been edited by cdlim87: Apr 19 2009, 01:36 AM

wat about tis oc?

bro, do bring down a lil bit the NBfreq if ur system not stable, coz frm review that i read, thy gotto pump vNB to around 1.4xx to get stable at that high NBfreq.

js go on bro.. if u can get 3.6 prime is nice enuf, frm wat i saw thy get stable at 3.8 3.75GHz but is not prime stable,
is js stable for benchmarking software only.. was not stressing like us..


___________________________________________________________________________________________

add on:

again i repost the anandTech review link >> http://www.anandtech.com/cpuchipsets/showd...=3512&p=11&cp=6

Max clock with stock vCORE


Max stable for benching clock


This post has been edited by cdlim87: Apr 19 2009, 01:21 AM

right after i saw ur guys advices i straight away stop my test and restart the pc but it won boot after shut down. i hv to reset only it can boot. wat is tat mean? beside, tis is my new oc.

cnt boot in mean non-stable oc..or not enuf vCORE. or something like that..

aft u reset the setting oledi goes bec stock so it js can boot in.. and now ur NB goes lower, so u can js do a stable stress.. or mayb u can try higher clock..

the restart problem i dun need to reset my bios, i jz press the reset button to reset the pc den it will boot to the previous oc setting. right now i wanna stress it longer and see wat's the result b4 i oc higher. how long i need to stress it?

ohh.. icic... mean it still able to handle this setting..

ok keep moving on.. now is for u to looking the max point..

for me, i will stress around 15-20mins, if no error will cont OC to higher clock... until got error,
then i will goes down back, and looking for the max stable point..
this is a fast way to find a max clock of ur chip..

aft u got ur max clock, u gotto find out the isolation point for max performance of ur rig.

gogogo... ASUS

oh yeah, i'm coming. now i'm gonna up my oc. wat for my result.

---

Added on April 19, 2009, 2:11 amjz now tried up vcore but failed. wat is holding it back? prime test 275x13 blue screen after a few minutes. up lil NB freq and try prime again now.

This post has been edited by zerohunter: Apr 19 2009, 02:11 AM

wow zerohunter...teach me oc phenom II....

actually i'm still a newbie in amd. i was an intel user last time. hehe. but i dun mind to share my 810 oc with u.