It all boils down to the purpose of your pc.

And ofcoz, the wallet of yours. If got extra cash, why not buying the proc and give it a try since you are interested with it.

Hmm dont think so... if got cheap also then buy for my cousin who needs a htpc ... haha..

Before passing it to him, you go and play for a while 1st.

To be honest i find taking out a proc and put it back in every time is ridiculously irritating...

hahahaa... just me lah... but i'm banking on the new chipset RD890 ^^

This post has been edited by picksickrick: Apr 18 2009, 02:06 PM

True as well, especially when a 3rd party HSF is staying on top of the proc.

yeaaaa...ur brisby BE kenot reach 3.2ghz? btw i find ur Vcore is really high...

This post has been edited by picksickrick: Apr 18 2009, 02:10 PM

Mine is Brisbane not Windsor, I do notice that Brisbane core use much vcore than Windsor provided both running at same speed.

And some more currently not much time, need to study for final exam. vcore till 1.5 I'm still okay, as long as the temp is not too high.

This post has been edited by shinjun: Apr 18 2009, 02:11 PM

saja saja nak mendemamkan verdict..
coz i wan poison him until he open a thread [WTS] PhenomII X4 940BE

luck always goes with u.. try it hard..

check the efficiency, the power rating of ur rig will running on.. chose the one which the most suitable for u 1...
so that u can running at the higher efficiency rate when using it.

ya.. funding la.. 955 + RD890 chipset waiting for u

no.. performance will nvr drop... only not as top as DDR3 only..
OC still like normal IMO. unless there is something that doing by new chipset where old chipset cnt do..

yeah.. nice... we must look forward.. look further.. RD890

eh killer whale seems to be as good as ccf... plus my casing has a fan blowing directly to cpu... hmmm .. shud i get killer whale instead ?

blow in type(KW) can cool down ur PWM too...

but for long run the air flow still own by the tower cooler type which like CCF blow from front to back. the fresh air come frm front exhaust to back side.
that is the best airflow ever.. its depend on urself which 1 u like..

i would vote for CCF if u ask me opinion

odin pro 800w@rm450 on the loose at garage sales.. hehe

ac freezer xtreme oso on the loose..

@cdlim87
u still dono ar how i put 12cm fan on the ac freezer ?

i agak agak oni lor... not really sure hw u tie it there.. coz i noe the AC extreme fan at center,
so i guess u js pacak at center there, wat i interest to noe is hw it can sit stable there?

w/o any screw or similar thingy to tie it there..

so if the fan is loose, normally will make noise especially the higher CMF fan..

so if u got a picture its good for every1 here too..

Just grab Phenom II X4 920....how to oc tiz baby? even i oc'ed 5% cannot load windows d...and auto restart when boot it..some more bsod..noob here.....

b4 tiz can OCed my 6000 to 3.5...damn stable...

mind post ss and ur spec (mobo and all other things) ..

u make sure ur asus m2n68 support well on PhenomII ?? BIOS updated?

it too depend on the mobo sometime, k8 no worry with the NBfreq, and the HTlink around 1000 only..

Phenom/PhenomII u gotto take care bout the high HTlink/NBfreq

do u clear CMOS aft u change ur chip? try clear CMOS n disable the CnQ.

i aspect u can do well as u can do stable 3.5G on ur 6000+

yeah..it support after updated the BIOS...if not maybe can boot but not detect..or not boot at all...

how to clear cmos? some more my bios doesnt have HT freq to change... and never use CnQ...

Oc the 6000 is easy...juz up the bus speed and check stable or not with Orthos...but not with phenom II eh...

Sorry for my noobie..

lol tak nampak from ur siggy hheheh

2 way of CMOS reset:
-shifting the jumper cap frm pin 1,2 to pin 2,3 wait few s, change bec to pin 1,2(refer to ur mobo manual)
-unplug ur battery and replug aft few second..
(*make sure off all electric power and unplug the power cord)

K8:
cpu speed = HTT x cpu multi
HTlink = HTT x HT multi
ram = cpu speed/ divider (*which depend on the ram setting & cpu multi)

K10:
cpu speed = HTT x cpu multi
Htlink = HTT x HT multi
NBfreq = HTT x NB multi
ram= HTT x ram multi
>> ram setting:
400 = x 1
533 = x 1.3325
667 = x 1.6675
800 = x 2
1066 = x 2.665

basically OC for AMD oc, once u touch HTT, every thing else will get change.
so try ur best to find out the isolation point for each so that u can get a optimum performance of ur setup

This post has been edited by cdlim87: Apr 18 2009, 04:02 PM

wa...thanks for ur explanation...eventho im kinda blur2 to understand...

so,i nid to find a link tat will guide me step by step how to OCed tiz phenom... aww..nub+lame me...

refer to phenom OC guide. refer to 1st page of this thread