Define LED - History, Application (Click me)~!!
How LED works? (Click me)~!!
LED further explanation

1) white color flux----RM1/pcs only

Description MAX value
power dissipation ---------------100mW
peak forward current -----------100mA
continuous forward current ----- 35mA
reverse voltage -------------------- 5V
forward voltage ------------- (min)3.0v, (typical)3.3v, (max)3.6v


2) blue color flux----RM1/pcs only
Max 5v
Max 35mA
pls check below for further details


3) red color flux----RM0.80/pcs only
Max 3V
pls check below for further details


4) yellow color flux----RM0.80/pcs only
Max 3V
pls check below for further details


5) custom PCB----RM2.50/stick (no stock)


6) 150ohm resistor----RM1/10pcs

7) 200ohm resistor----RM1/10pcs



terms and condition

Minimum order quantity
40 pcs flux LED open for all color.

dealing method
1) bank in payment and i will send over stuff to you all via pos laju (anti press packing using)
RM 7 charges for all penisular malaysia, RM9 for east malaysia.

2) bank below are all accepted.
-CIMB bank,
-PUBLIC bank,
-Hong Leong bank,
-Maybank.

3) ATM transfer, cash deposit, online banking transfer are all welcome.

or

COD at
1) pandan indah steven corner shell petrol station
2) ampang carefour
3) cheras connaught

please PM for account number for payment.

This post has been edited by noelogy2007: Nov 6 2009, 09:01 AM

Resistance calculator (Click me~!!)

if you wanna put your DIY LED into car,
please use 14V to calculate for safe side,
1) white-25mA,3.6V
2) Blue-20mA,3.6V
3) Red-20mA,2.0V
4) Yellow-20mA,2.2V

This post has been edited by noelogy2007: Aug 21 2009, 03:08 PM

sample photo for display









This post has been edited by noelogy2007: Apr 1 2009, 08:15 AM

my successful trade list

1) slapdash41- 80 white, 20 blue- payment received by 26-4-09--item send out by 27-4-09--ETA by 28/29-4-09
2) nordingh - COD at carefour ampang
3) mosabiro - item send out
4) lamir loco - 100pcs white - COD ar carefour ampang by 11-7-09
5) brico - 40 pcs red - item send out 15-7-09 en197189415my
6) cancirook - 40 pcs white - 5 custom PCB - item plan to send out by 20-7-09
7) wei loon - 20 white
8) eng tat - 60 red
9) rui soon - 40 white, 5 red
10) david koh - 40 white, 20 red, 20 blue
11) mystery - 8 red, 8 blue, 4 white
12) ting - 21 white
13) 2uk3y - 20 red
14) ivan ho - 24 white, 22 blue, 10 red
15) after5 - 20 white
16) darkshining - 40 white
17)
18)

This post has been edited by noelogy2007: Aug 21 2009, 09:03 AM

Bro, custom PCB come with white casing or not? To lazy to do some board etching and custom casing now.

see whether your application area,

just to clarify the casing just for display only,
and the main item is the PCB, that is y i purposely take 1 photo with only the PCB board.

u just only apply double tape at the soldered custom PCB
u can stick what ever place you wish t put inside the car.

This post has been edited by noelogy2007: Mar 31 2009, 05:58 PM

Really interesting. Got different colour. Btw, no interchangeable colours when changing pole?

no interchangeable.
same type of color for each LED.

Interested with ur led. Can teach me how to use all these led with dimmer module? Got forumer sell dimmer led for car roof lamp. Pm me if u can help me. 2 more weeks i'm going to KL. Can cod led at carrefour ampang.

this is will be my next project next months... stay tune for my order.....

cruxs. i have already reply u in PM

nordingh, i look forward from your reply soon, thank you~!!

who manufacture this LEDs? Any info on the light output?

minimum 40pcs per person?

i have reply u in PM,
please clarify with me.

yes, per person 40pcs.
open for all color LED.

just want few pieces how bro ?? tx pm pls

can use for pc mod
sorry noob question
dont know anything about led

Interested here, but 40 pieces seems to be a tad too many LEDs for a simple PC mod. Might end up looking like a xmas tree. Any way to lower the MOQ or hitchhike another order?

Can use 10 for PC, others can put behind LCD screen, make a nice back glow while playing games (especially blue)

Or you can fix it to a switch , with each PCB different color LED, you can switch the color illuminating your PC depends on Mood.

Ehrm.. this bulk seems interesting ... Maybe will be buying this soon.

thank you everybody for supporting~
i will try my best to provide better service to you all.

is it all range in table Post #2 are available?

not all,
but only white, blue, red , yellow
the chart just to show some technical specs.

bro can u make a touch light for me? using 2 AA battery ?


if can bro pm me ya I want to put on my bycycle

bro i wanna put led in my car ler...so how ah? do i need the board to hold my led?
the place i wanna put in my car will be like the 1 u show in the picture..above the foot area bro...

---

Added on April 23, 2009, 2:48 ambro i wanna put led in my car ler...so how ah? do i need the board to hold my led?
the place i wanna put in my car will be like the 1 u show in the picture..above the foot area bro...


This post has been edited by contreasjun27: Apr 23 2009, 02:48 AM

if you wanna put in your bicycle,
u need to connect the LED to your 4.5V battery parallel.

the photo just show for display only.

---

Added on April 23, 2009, 8:03 amyes, u need the board to hold your LED firmly.
the board you can see in my thread, it is very easy to solder as the board is custom design for it, no need to cut board, no need to cut the line, u just onli put in the LED and solder ..then it will be done.

yes, u can put at your foot area, no problem, u can apply double side tape to stick what ever place u wish.

This post has been edited by noelogy2007: Apr 23 2009, 08:03 AM

U got PM

hi TS, can we light up those LED using USB from casing? I am interested. Please PM me.

bro just wanna ask the soldering do i need to get the machine to solder myself? or u do 1 whole package bro?
then about the board right after soldering is it like got 2 wires which can connect to the battery like that... the negative n positive wires?

bro,the white is only 6k mcd?

one package content provided to you include LED, custom PCB, resistor, 2 wire
and you r the king that is going to solder, dun worry, the custom PCB has already printed circuit there,
no need any more cut and chop, the custom PCB has photo shown in the thread.
u just need to do is put in the LED, resistor, wire to solder onli....

and that is full of DIY fun during the process~

---

Added on April 23, 2009, 10:52 pmhmm, how should i say...
base on the sheet, yes...it should be pure white according to the chart.
but u can see in the thread showing the color is pure white.

hope this would help u



This post has been edited by noelogy2007: Apr 23 2009, 11:18 PM

if i put one row in series then i need 12v dc for input voltage loh,am i right?

yes,
in theory, 12v we count as 14V
u can put 3 white LED in series for a 150oh resistor.

hi noel, can you pm me the datasheets?

bro..u got PM..

---

Added on May 16, 2009, 3:04 ambro..wanna add some more flux LED...still doing business??

This post has been edited by sipout: May 16 2009, 03:04 AM

dear all, i m back ~!!

just back from 1 week vacation~

sipout, i hv not received any you pm yet~
please re-send your PM to me~

thank you~

noel

I going to do some business with you. Can you PM me your contact number. Will contact you during this weekend.

this one is very good for diyer

can modified to car signal light ???

---

Added on May 21, 2009, 3:52 pmis this product ??
http://www.china-led-manufacturer.com/chin...er-flux-led.htm

This post has been edited by zonlee: May 21 2009, 03:52 PM

I going to modified for car use...

yes, u can put as car signal light,
but not replace your existing original signal light,
just to add on,

if you replace your signal with LED, it will flash faster than normal

---

Added on May 21, 2009, 10:29 pmstock is limiting~
better hurry everyone~

This post has been edited by noelogy2007: May 21 2009, 10:29 PM

Really recommended seller. Even during sick day still manage to meet with me for COD yesterday.

I have completed 2 set (blue and white) to be use in car. The rest still have no idea where to use.

When out of stock, I going to get more from you.

My 1st project finish.

Inside car:


Brighter than ready made LED light that I bought previously.

Boot:


Before I use 10W bulb and the plastic melt because to hot. Now no more hot light and brighter too.

mr nordin,

it is my pleasure to dealing with you,
i just had my medicine, so kinda blur to calculate the total amount to you...hahaha

glad to see that you have your DIY~

do let me know if there is anything,
and nice dealing with you~

already finished build car room light over a week ago. total led use, 65 pieces. bright as a daylight. haha..

I plan to use more than my 1st project but I use 3 1st as I really need to put in my car urgently.

stock is limiting~

dun forget my order ya bro?

ya sure~bro
no problem

can teach me how to calculate ???

how many Ohm and how many LED are you using ??

The answer already in 1st page... (as above)

Did you notice, there only 3 LED's in my picture...

Good luck DIYer...

white LED stock is limiting~
last few pieces

---

Added on June 5, 2009, 7:54 amwhite flux, last 8 LED left~!!!

This post has been edited by noelogy2007: Jun 5 2009, 07:54 AM

bro....mind give me price for 20 red flux led plus courier to JB...tq

sipout, pm replied

hello bro noelogy2007..

i want to order the blue led flux..
also red flux n yello flux led..
how many you have?

hey, mosabiro

thanks for inquiry,
just to inform that blue only left about 20+pcs, red 40+pcs, yellow 60+pcs

white no stock now,
all the shortages will be refill back by next week.
but dun hv blue stock to be refill, mayb late end of july will get the blue stock refill.

thanks in advance for your patient~

i look forward from you reply soon, as your feedback are always welcome~

noelogy

This post has been edited by noelogy2007: Jul 1 2009, 08:27 AM

dear all

white flux going to be refill soon,
please be patient~

thank you~

i want to order the blue flux led.. 20pcs.. how much..
clear stock price.. hehe

pm replied, please check

dear all, thank you for supporting,

White flux will be refilled by this week,

thank you for your patience.

hey doncity,

thanks for inquiry,
yes, can be mix & match

but the blue and white flux LED is out of stock for now
white flux LED will refill soon by this few days
blue color temporary no stock.

i look forward from your reply soon

thank you
noelogy

Hi, I wish to buy 20pcs of the red type to repair fused units at car third brake light , but not a techcy guy, so is it simply unsolder and resolder ? They look visually the same shape.

---

Added on July 11, 2009, 10:13 pmHi, I wish to buy 20pcs of the red type to repair fused units at car third brake light , but not a techcy guy, so is it simply unsolder and resolder ? They look visually the same shape.

This post has been edited by Brico: Jul 11 2009, 10:13 PM

yes, if you can ensure your blowed LED specs is same with mine, then it can be apply.
it is just unsolder and resolder job (please ensure your resistor + circuit is function in good condition)

up to date 13/7/09

white- stock available now
yellow-stock available now
red- last 40+ pcs reserve for Brico
blue- stock is out for now

din hav uv colour ?

UGPM bro...

sorry, dont have UV for now

---

Added on July 14, 2009, 8:23 amPM replied~

This post has been edited by noelogy2007: Jul 14 2009, 08:23 AM

possible to mod into downlight ?

u mean downlight = car exterior under light?

if my understanding is car under light,
yes, you can mod it to car under light,
but u need to ensure the LED is seal in water proof condition to avoid rust/water/vaporize/short circuit.

note me if i was wrong.

look forward from your reply

noelogy

http://img.alibaba.com/photo/51605213/Sell...Downlighter.jpg

http://www.aceliteled.com/ProductPicture-c...K1040-384-0.jpg

Sample of LED downlight

issit apply interior?

if you have the holder and frame as photo you attached,
yes you can mod to the design u wan.

hey there...
Wanna ask, what battery we use to operate them....thanks...

for i say, many kind of battery also can be using.

you can use 2 x AA or AAA 1.5V alkaline battery, the LED will light up, the LED voltage is 3V (+/- due diff color diff spec)

you can use 12V~14V car battery also can light up them, but you need to add resistor in the circuit.

you can have your resistance calculator stated below,
http://led.linear1.org/led.wiz

hope this will help you

noelogy

This post has been edited by noelogy2007: Jul 14 2009, 11:26 AM

waow that was a quick reply...
hmmph, i was thinking of putting those SuperBright LED`s into my computer casing

thanks anyway.. Will contact u if i wanna buy... Can COD at taman cannaught rite ? haha, that would be good... cuz studying thr ..

thank you neology..
i receive your item last week..
fast delivery..
very good seller..

hey jason,

yes, u can put LED to your computer casing.

u need to ensure what is your power source voltage is,
then you use the input voltage data to key in to the calculator,
u will know whether you need any resistor / what value the resistor is.

beside, u also need to ensure the insulation is in a proper way

yes, we can COD at taman connaght McD after 5pm for weekday, and after 1pm by saturday.

glad to hear from you, anyway, i look forward for your reply soon, you feedback are always welcome~

noelogy

---

Added on July 15, 2009, 9:43 amhey mosa,

glad to hear from you~!!
look forward for your DIY photo, hahaha

noelogy~

This post has been edited by noelogy2007: Jul 15 2009, 09:43 AM

bro i wana get like possibly 20 white only.. hw do i go about? since ur moq rather high for me le

hey someone,

yes, i am ok to selling in 20 white if you want.

PM me your address, and i will give you all the necessary details for payment

thank you
noelogy

ok 1 last question b4 confirming order, the pcb can custom make into any shape? like the square 4X4 wan or juz the long 1?

the custom PCB canot make into any shape, it is already custom made according to the design
the custom PCB is only for 3 flux + 1 resistor in series, not like those PCB with many hole.

how ever, the custom PCB has already sold out, which ordered by Cancirook

i look forward from your reply soon, as your feedback are always welcome~

thank you
noelogy

white stock available now, blue no stock
yes, by pos laju

PM replied.
pos laju only additional RM6

bro...item received yesterday in good condition...
thx..

glad to hear that~

and PM reply ZIR~

---

Added on July 29, 2009, 8:26 ami will be out of desk for 3 days until friday, saturday i will be back

please leave msg and i will reply to you as soon as possible

This post has been edited by noelogy2007: Jul 29 2009, 08:26 AM

hai bro .... can i order for ....

20 pcs RED color superflux led
5 pcs 1 ohm resistor
1 pcs electronic board that got many holes.... sorry not remember the name

plz PM me for detail.... TQ

just received another 50 pcs white LED.. good product and great seller..highly recommended!

PM replied bro,
let me know if anything~

---

Added on July 30, 2009, 9:34 pmthank you slapdash~
nice dealing with you~

look forward from your next order~
hehe


This post has been edited by noelogy2007: Jul 30 2009, 09:34 PM

hi.. bro... PM me the total price + postage to Johor... for 40pcs White, 20pcs Blue and 20pcs Red Super Flux LED.....

Will make payment to you on Monday...

Thanx..

---

Added on August 1, 2009, 8:34 pmand PM me ur CIMB account

---

Added on August 1, 2009, 8:36 pmbro.. 2ukey... going to DIY ur 3rd brake lamp for ur myvi rite...

hehehe.. me too...

This post has been edited by maumau: Aug 1 2009, 08:36 PM

pm replied~

Bro can i take for 15 only?

pm reply~ mystery

---

Added on August 3, 2009, 2:39 pmi have replied u with a clearer explanation
hope that u understand

i look forward from your reply soon~

This post has been edited by noelogy2007: Aug 3 2009, 02:39 PM

Bro what i interested to take 10pcs (5 white and 5 blue) and my location is at PG.

Kindly, give me a best price including postage fee.

pm replied,

what i recommend to you is to take at least 20pcs order,
it is more worth in a average cost.

Can I have the datasheet ? Need physical dimensions. Thanks

u can refer to my first topic,
and if u need further more clear view,

do ask me, then i can email / pm to you

thank you
noelogy

Hi.. bro. received my PM and payment?

yes, item has already send out today morning

Just receive item today.. Nice packing and fast. Thanks bro.. Looking forward to deal with u in future.

glad to hear that~

hehe

anyway, nice dealing with u ~~

Received the item in the morning....
total purchase 80 superflux LED
well packing and fast deal...

looking forward to deal again in near future..

Recommended great seller....