bro can u make a touch light for me? using 2 AA battery ?


if can bro pm me ya I want to put on my bycycle

bro i wanna put led in my car ler...so how ah? do i need the board to hold my led?
the place i wanna put in my car will be like the 1 u show in the picture..above the foot area bro...

---

Added on April 23, 2009, 2:48 ambro i wanna put led in my car ler...so how ah? do i need the board to hold my led?
the place i wanna put in my car will be like the 1 u show in the picture..above the foot area bro...


This post has been edited by contreasjun27: Apr 23 2009, 02:48 AM

if you wanna put in your bicycle,
u need to connect the LED to your 4.5V battery parallel.

the photo just show for display only.

---

Added on April 23, 2009, 8:03 amyes, u need the board to hold your LED firmly.
the board you can see in my thread, it is very easy to solder as the board is custom design for it, no need to cut board, no need to cut the line, u just onli put in the LED and solder ..then it will be done.

yes, u can put at your foot area, no problem, u can apply double side tape to stick what ever place u wish.

This post has been edited by noelogy2007: Apr 23 2009, 08:03 AM

U got PM

hi TS, can we light up those LED using USB from casing? I am interested. Please PM me.

bro just wanna ask the soldering do i need to get the machine to solder myself? or u do 1 whole package bro?
then about the board right after soldering is it like got 2 wires which can connect to the battery like that... the negative n positive wires?

bro,the white is only 6k mcd?

one package content provided to you include LED, custom PCB, resistor, 2 wire
and you r the king that is going to solder, dun worry, the custom PCB has already printed circuit there,
no need any more cut and chop, the custom PCB has photo shown in the thread.
u just need to do is put in the LED, resistor, wire to solder onli....

and that is full of DIY fun during the process~

---

Added on April 23, 2009, 10:52 pmhmm, how should i say...
base on the sheet, yes...it should be pure white according to the chart.
but u can see in the thread showing the color is pure white.

hope this would help u



This post has been edited by noelogy2007: Apr 23 2009, 11:18 PM

if i put one row in series then i need 12v dc for input voltage loh,am i right?

yes,
in theory, 12v we count as 14V
u can put 3 white LED in series for a 150oh resistor.

hi noel, can you pm me the datasheets?

bro..u got PM..

---

Added on May 16, 2009, 3:04 ambro..wanna add some more flux LED...still doing business??

This post has been edited by sipout: May 16 2009, 03:04 AM

dear all, i m back ~!!

just back from 1 week vacation~

sipout, i hv not received any you pm yet~
please re-send your PM to me~

thank you~

noel

I going to do some business with you. Can you PM me your contact number. Will contact you during this weekend.

this one is very good for diyer

can modified to car signal light ???

---

Added on May 21, 2009, 3:52 pmis this product ??
http://www.china-led-manufacturer.com/chin...er-flux-led.htm

This post has been edited by zonlee: May 21 2009, 03:52 PM

I going to modified for car use...

yes, u can put as car signal light,
but not replace your existing original signal light,
just to add on,

if you replace your signal with LED, it will flash faster than normal

---

Added on May 21, 2009, 10:29 pmstock is limiting~
better hurry everyone~

This post has been edited by noelogy2007: May 21 2009, 10:29 PM

Really recommended seller. Even during sick day still manage to meet with me for COD yesterday.

I have completed 2 set (blue and white) to be use in car. The rest still have no idea where to use.

When out of stock, I going to get more from you.

My 1st project finish.

Inside car:


Brighter than ready made LED light that I bought previously.

Boot:


Before I use 10W bulb and the plastic melt because to hot. Now no more hot light and brighter too.

mr nordin,

it is my pleasure to dealing with you,
i just had my medicine, so kinda blur to calculate the total amount to you...hahaha

glad to see that you have your DIY~

do let me know if there is anything,
and nice dealing with you~