Is it compatible with Vista x32? Anybody tried this?

And can you guys recommend me the most reliable driver cleaner cause I'm gonna be using my Pc for the cyberfusion LAN party tomorrow and probably wanna avoid any crashing problem or what so ever.
Thanks

EDIT: Guru 3D-Driver Sweeper (from googling I found that this is the most reliable driver cleaner) Anybody got any other suggestion?

This post has been edited by gto87: Apr 9 2009, 11:44 AM

This is the result I get before and after OCing the 4890 card and it's stable to. Bear in mind I'm not using the new CCC (means no new driver installed) cause later today I gonna be joining the Cyberfusion LAN Party and I don't want anything to go wrong at the very last moment.

P/s: I think I can do better OCing but there's no enough time and still doing research about how to tweak the voltage . Really glad if someone can OC it higher than this and post the result. Thanks~

EDIT: I'm not overclocking the proc yet, hence why the score is kinda low IMO.

This post has been edited by gto87: Apr 10 2009, 12:28 PM


Attached thumbnail(s)

Yes, I will drop everything back to stock setting.

I'm posting the result now because it's been almost 2 week since I bought and OCed the card. Later on Monday I will try to install the new driver and post the result later.

P/s: Waited for sooo long but they released the driver the night before the event starts.

Just installed the new 9.4 ccc and wanna try it with rivatuner 2.24 but somehow it cannot detect my GC. Anybody know anything about this~

This is the message I got when I use Rivatuner

and in the 2nd picture you can clearly see that there's no small thumbnail for GC.


Attached thumbnail(s)

Maybe next time I'll do it.

I'm using the catalyst 9.4 CCC and already installed the 2.24 version of the Rivatuner. I clicked the link you post before but it directs me to www.guru3d.com. Have anybody tried the link ben_panced posted before?

Tried that and after I finish DLing, I tried to extract it but failed. It said "the archive is either in unknown format or damaged". I tried again and again and still endup getting the same msg.

This post has been edited by gto87: Apr 14 2009, 04:58 AM

Could it be possible that the link is broken cause I tried DLing from my friends comp and still end up getting the same result. Do anybody have the Configuration file with them? PM me. Thanks~

So i can DL the configuration file now, will test it tomorrow since I have assignments to do tonight

---

Added on April 15, 2009, 12:00 amBtw, is there any aftermarket coolers that available for HD4890?

This post has been edited by gto87: Apr 15 2009, 12:00 AM

Simple but nice while HIS original design is simple and extremely hideous. Your's better 100x bro.

Do you do this as a part time job. If you are, I am planning to ask you to do it for my Sapphire 4890

This post has been edited by gto87: Apr 15 2009, 06:39 PM

Do anybody know the current market price for this Accelero twin turbo or anybody know where to get with a cheaper price?

Accelero Twin Turbo

Here's the details about the price. If you bought it then let me know the performance.

well one thing that makes the difference is what is your current GC. If its not the GTX285/295 or HD4870x2 than you better get it coz as far as I know, this is ATI's fastest single GPU card and with a price like that you'll lose nothing!

I own one anyway~

EDIT: I bought it a lot cheaper and that made it more sweeter

This post has been edited by gto87: Apr 19 2009, 08:03 PM

This is what I get before and after I OCed both GPU and CPU. Is it ok or should I achieve more than this?

Anyway, I wanna try to OC it to 1GHz but a little afraid to pump up the GPU voltage. I'm not using any after market cooler.. So, any advice guys?


Attached thumbnail(s)

Two words, Limitless desire.
Anyway, thanks bro, will post the result here when I'm done OCing the card to the next level.

I know this question will be rather stupid but I will ask anyway, what is the maximum voltage that I can/allowed to pump in so that I won't 'kill' my card.
Thanks for the info pikachu.

This post has been edited by gto87: Apr 20 2009, 11:30 PM

Thanks again bro.
It's not about 3dmark points. It's about my crysis all very high setting. It's getting better and better since I started to overclock it slowly. So I really want to see what this card is capable when it is pushed to its max!
I'm aware of the danger, that's why there's like 20 or more tabs opened in my firefox right now and all are about tweaking the 4890 voltage.

I really gonna try it. wish me luck~

EDIT: Thanks for the compliment.

This post has been edited by gto87: Apr 21 2009, 12:38 AM

Haha, anyway, didn't tried it yet. Have a lot of assignments and stuffs to do

yupe won't be greedy cause, I only want to achieve 1GHz and maximize the memory clock to 1200, that's all. But thinking about buying the artic cooler 1st before doing it. It's much more safer, rite?

Thanks for the advise bro........ LOL~

This post has been edited by gto87: Apr 21 2009, 11:30 AM

Are you referring to me? Yes I'm using Sapphire but I overclocked it to 980/1180 only.
1000/1170 is great achievement though. hehe~

This is the result before and after OCing both GPU and CPU for 3DMark VANTAGE~


Attached thumbnail(s)

Thanks Bro.
I'm aware of that, but I'm still a noob in OCing i7 proc. I'll try with HT on later (but the temp goes like )