Here are my Hyper 212,
The Upper base of fins got scratches here and there,
can anyone help me on how to remove it(the scratches),
and make it shine or just let it be same like original fins without scratches??
Guide,experience and any working method can post here,
Thanks for your help

here are the picture:

use water and metal sand paper.

oic,thanks for your advise,
but does using the metal sand paper will make it rough and will got more scratch??
Sorry for my noob

no it wont
give it a try
apply water during sanding
like deep in the metal sand paper in the water and start sanding

oic,thanks bro,
whut number of sand paper need to be use??
i mean grid,

*typo

This post has been edited by MildLO: Mar 9 2009, 02:13 AM

dont use those bad quality sand paper.. use the high grade one.. and definitely not the rigid one.. will cause more scratch..

number/grid im not sure
use the lightest metal sand paper.

oic,i really dunno how to do it,
any suggestion on the sand paper??
or got any other solution?,something like autosol??

---

Added on March 9, 2009, 2:25 amoic,thanks for the advise bro,but i need to know which sand paper is better,
i hope my hyper 212 will be like it use to be,not in scratch condition

This post has been edited by MildLO: Mar 9 2009, 02:25 AM

try find and use 1500 and 2000 grid sandpaper

bring along ur HSF and ask which one to use

oic,does the condition will be ok bro??
and how to sand it? lightly smooth?? inside basin of water?
dunno how to describe it,hehe

---

Added on March 9, 2009, 2:32 amnice2,i will try to ask the hardware shop,hope get the solution

This post has been edited by MildLO: Mar 9 2009, 02:32 AM

All the best to u bro, good luck.

not sure my self, cuz i never did one of this (cuz no one ask me )

"inside basin of water?" >> this one called wet sanding

wet sanding will be good if u know how.


do not ask hardware opinion...
i ask one b4 (cuz looking for sand paper to make a smooth surface..)
they give me the roughest sand paper stead... =_="

maybe can.. if they know their work.. >___<

This post has been edited by m2n-e: Mar 9 2009, 02:34 AM

apply water at ur sand paper
then start sending then apply water repeat2
till SEMUA OK!

thanks for the wish bro,but why with ":( " this face??
are u got the same problems??
come share in here

---

Added on March 9, 2009, 2:39 ami got quite same answer as asking at the hardware shop before,
want to sand my motorcycle parts,asking for the finest paper,
but in the end give me rough sand paper,


i want to try on others shop,asking each hardware shop,hehe
thanks for the advise bro

This post has been edited by MildLO: Mar 9 2009, 02:39 AM

just a little bucket of water and sand the item close to the water.

hehe,u must have use this method before since from the thread started,u giving the same solution,
have this work for u bro? ,
does any compound or polishing can remove this scratch?
,its kind of a not to deep scratch,

---

Added on March 9, 2009, 2:43 amoic,it doest make the aluminium become more scratch?? coz im very2 worry bout this,

This post has been edited by MildLO: Mar 9 2009, 02:43 AM

Hehe...
Yea i`ve been using this method to polish my silver ring etc...
and i use this method to remove paint from casing bcoz wanna re-spray with new colour

i use it b4 on my metal gear nob on my car.


(alright good night going to sleep now all the best to u bro)

This post has been edited by aBc!!: Mar 9 2009, 02:47 AM

oic,thanks for the advice bro

---

Added on March 9, 2009, 2:48 amthanks for the advice bro

This post has been edited by MildLO: Mar 9 2009, 02:48 AM