If I have the MSI live update...can I use that to update?

Btw, I dun have a floppy, how can I make it?

What's the drawback of flashing bios?

I can't install the HP Drive Key Boot Utility.

It says not supported by the OS. btw, i'm using vista ultimate.

Yeap, below is the screen shot.




This post has been edited by shinjun: Mar 12 2009, 11:17 PM

Yea, trying to fix it now..=.=

---

Added on March 12, 2009, 11:18 pmHow's that bro? better?

This post has been edited by shinjun: Mar 12 2009, 11:18 PM

lolx....coz u are cute enuf to be in the picture.

---

Added on March 12, 2009, 11:40 pmThis is AllnGap

This post has been edited by shinjun: Mar 12 2009, 11:40 PM

Try ur luck here bro. http://forum.lowyat.net/index.php?showtopic=427063&hl=

Back from vacation, so stick back to my problem, was trying to learn how to flash bios, but this error occur. Any1 can help?

Tried using the MSI live monitor software to update bios in windows.

But after reboot, run CPUZ and check..still the same old bios.

hmm..do u all think 1.41 vcore for a 5000+ BE running at 3ghz a little too high?

Then maybe i have to get a cooler..my stock cooler can't handles it and the comp restart.

Happy Birthday to TS.

Btw, back to overclocking matter.

I have a problem here, my 5000+BE running at 3ghz@vcore 1.41 when running 8m SuperPI it will blue screen.

But when running 1m it's fine.

Hmm, I'm using stock cooler previously run OCCT and it restart guess it due to overheat as well.

sorry bro, now revert back to stock setting no ss taken. btw, i'm using MSI KA790GX mobo, 4 x 1gb KVR DDR667, 5000+BE 3ghz@1.41vcore(200x15)


i'm using stock cooler ler, those xigmatek 1283 cant fit in my casing.

can't close the side panel, so now funding for new casing.

btw, i use MSI KA790GX

Ermm, not same for them coz i add on another 2 stick later.

Btw, will change to 2x2gb DDR800 later.

And previously for my setup, I didnt clock my RAM i let it run at default.

Okay, I'll try to take out 2dimm and gif it a try.

Runing with 2x1gb DDR2 800 can boot up at stock vcore 3ghz (200x15).

But it shows blue screen after a while.

Get it, will give it a shot.

Now running at 2.8ghz, but 1 thing, my RAM running at 311mhz instead of 400mhz..wonder y.

The ratio in bios I set auto.

The RAM that I currently using it KVR800 actually. I got it mix previously 2x1gb KVR667 and 2x1gb KVR800.