hmmmm.........alright try open the side penal and look in side at the front 230mm fan u put ur hand in and push the black little button that hold the front penal .


Hope this help u .

u try first
then i gotta try lol

ya try it fist .

u wan to take the front fan out hor?

This post has been edited by yen262: Feb 22 2009, 12:27 AM

nop just exploring
how to take one??
i see no black little button inside

yup by opening the fan need to take off front panel fist .

---

Added on February 22, 2009, 12:39 amwell try exploring it fist la i'm sure u will get it ^^.

This post has been edited by aBc!!: Feb 22 2009, 12:39 AM

Finally.... Koki, congrats on being an owner of a CM casing!!

Remember to save all your money/allowance and bring to LYP to bling/upgrade your rig ok so for now this month til when u come down here u just eat bread, roti kosong (not Gardenia ok..expensive ) and drink ais kosong then sure got money to buy more stuff ehehehe

yeah inspect your casing properly before trying to take out the front panel... figure out where are the locking mechs k. when I took mine out from the 690 also took awhile, scared break it.

Xelna,

wah u broke all the plastic honey comb from the top panel?? easy task to do it??

Have any of you seen this?



THis is the most beautiful stacker i have seen.

More pics here.

i used the cutting tool as u can see in the picture ..

it is not that hard .. but it is worth for everything i cut .. results is more air flow and easier to clean ^^

Never seen it before..Btw, this case is what model of cm stacker series ?

finally all koki's talk as turn into action!!
Gratz
been away for a day messing with my new phone almost forgot about this thread.
stupid garmin maps took me 4 hours to get it install on my nokia 5800

anyway koki to answer some question.
-ur cable managment is a mess.
-bottom intake fan for HAF not really recommended. coz common sense lar most of use sweep floor oso sweep around then below the case we sure leave it.
so the bottom part of the casing is always the dustiest.
-but as for now u are using stock side panel fan then ok lar to install the bottom intake for now.
-it is better to remove it after u replace ur side panel fan with 4 12cm fan coz the bottom fan intake and the bottom right of the side panel intake will clash.
-the original screws that hold the stock side and top fan are allen keys.
front panel bazel can be remove but require quite some force.
-i broke one of the 4 mounting on the bazel but it's ok no biggie. i open the bazel always then remove the metal mesh on it to clean coz dust usually trap there. when u remove it u will see the dust are all in line look very nice 1 lol.
-doesn't matter the size. wad matters are they support ATX mobo. which is the our common mobo like p45 chipset mobo. if ur casing accept atx then it will accept M-ATX. E-ATX to me is just something extra which u probably wont even use unless u are rich enuf to buy 4 piece of FB-DIMM ram, 2 QX9775 core2extreme processor and intel skulltrail motherboard.(correct me if i am wrong)
what matters most is just ATX. so CM690 user no worries coz it is already enuf to fit ur ATX mobo.

ATCS user. if u install the 2 fan on the hdd cage then bottom intake noneed to install.
but if u dont install the 2 fan on hdd cage then u should install the bottom intake fan.
in my opinion. install the 2 fan on the hdd cage. install the air duct behind the case. with the top 2 large fan doing the exhaust work the air will come in from the bottom of the casing passively.
if u wan the bottom to passively intake more fan. the top mounting for the 360x120 length radiator area.
mount 3 powerful 12cm fan to assist the top exhaust.
this concept should be correct la. u can check ur bottom filter from time to time to see if it collect dust lol.

i had made up my mind on my casing future upgrade on fans. gonna buy 4 Xigmatek XLF fan with transparent black blade. for side intake. 3 xigmatek XLF fan with orange transparent blade for top exhaust. 1 set UV violet CCFL and 1 set white CCFL.
white ccfl at the top and bottom of the case. UV violet at top and beside the motherboard.
move 1 of my blue fan to bottom intake and another to optical drive bay for intake. sponge seal up some area.
wanna try out pekies's positive pressure concept.

@koki
since u ady get ur HAF maybe tomolo i take pic of my latest management and ost it here lar.

@xel
cute interior... wad system is that. intergrated graphic?? when u plan to change specs?

edit:
@koki i download ur photo and draw on them for you to refer

This post has been edited by hahn87: Feb 22 2009, 06:50 AM


Attached thumbnail(s)

@Koki, i saw your HAF right side, i will pening lol.

STC-T01, here more detail
http://www.coolermaster.com/products/produ...act=detail&id=4

oh god
thx hahn but my eyes now pening liao

---

Added on February 22, 2009, 10:58 ambtw i did all my cable management in a rush coz i dont want my mom to see the interior or she'll scold me

This post has been edited by Koki: Feb 22 2009, 10:58 AM

haha same goes for me when i bring back this case to home.

koki, jz do it nicely n giv sum patience...
i oso did my CM690 cable management myself patienly ma...
or u jz get sum opinion from other users
it'll help u de...don worry...all of us will support u!

lol~
thanks
how come this whole CM thread like gonna become my thread?
so sien la~~

nola...they jz help u 2 do nicely wif ur coolermaster stuffs ma...lol
now my pc got bios problem and cant boot again
sien~

because you just bought a new casing, it is normally like this one .. don't worry

is a sucky system .. but fairly silent when it was in my old casing .. and now it has return to old casing because of the modding im doing to my CM690.

i will change the specs as soon as i have $$ .. current spec is only E4700 2.6GHz and thats the only thing i like about my rig .. well who doesn't like a processor ?

ok will do it today :thumbs?

bro try clearing the cache in ur RAM and try dont OC first