If Phenom II AM3 has no L3..what a waste lor
Cannot pick two..
Must ONE only..
So mana u grabbing?

so we talking about this guy la right ? itula yg nk tanye td..

have to meet that person to get that price or just go to the shop ?

@cdlim87
when u wanna show us some oc result with the beast ar ?

y say is a waste if no L3, some say w/o L3 will hv beter performance, i still blur with it now...
may aim athlon lor like this...

curently too bz.. no much time for me to OC..
lot of asgmnt need to rush


==============

gona sleep, nitezz..

No need la bro..just go to the shop and look for REVE,the person in charged over there...

Mr Reve...hik hik hik...the fella funny one...ha ha ha...

He will assist you...

This post has been edited by verdict: Feb 3 2009, 02:35 AM

@verdict n ah_khoo
Can i know ur phenom's batch no?
Just wanna do a lil bit of comparison..
I clawed open my hsf yesterday my 9850be stepping was:
JAAAB AA 0826CPMW

I found this on d net but not sure if it's true or not..
JAAFB 0811 CPAW = good overclocker, low voltage to get to 2.9GHz (1.34V)
JAAFB 0811 CPBW = poor overclocker, high voltage to get to 2.7GHz + (1.42V)
JAAFB 0811 CPFW = good overclocker, low voltage to get to 3.0GHz + (1.32V)
JAAFB 0811 CPHW = (no recorded overclock yet)
JAAFB 0811 CPLW = (no recorded overclock yet)
JAAFB 0811 CPMW = decent overclocker, medium voltage to get to 2.9GHz + (1.4V) <= Do u think my batch is the same as this?? Kinda true to me coz last time need 1.37~1.38v to get 3ghz
JAAFB 0811 CPNW = (no recorded overclock yet)

This post has been edited by cloudwan: Feb 3 2009, 10:44 AM

Athlon X4 and Phenom II X4 price range very far..
Even the Phenom II X4 805 already cost around RM 600(expected/roughly)..
More choice to us

any new news on when will it be launch....

guys, i need sum advice. i tried to OC my 9550 through the bios. i push the proc to 2.64GHz with 1.3V, but windows didnt detect my speed as 2.64GHz but the bios did (under Cell Menu -> current speed). even when i push juz a bit (200MHz - 300MHz) windows still detect it as 2.2GHz. any advice? my spec:

Phenom 9550 2.2GHz
MSI KA780G-M
Corsair DHX 4-4-4-12 2.1V
Silverstone ST50F

This post has been edited by typicalsite: Feb 3 2009, 11:16 AM

bro, in my case:

9550 0810 gpaw (95w) > 2.8GHz w/ 1.296v
9950 0833 bpmw (140w) > dun wanna compare, not fair
9750 0805 gpmw (95w) > 3.0GHz w/ 1.312v

all are prime stable...

go to xs to view d agena oc chart, iirc 0810, 0811, 0816 & 0836 are gud batches...

not that i'm promotin dfi bro, but i can safely say it's d board that is holdin u back. i'm testin my 9750 on 790gx 128M (yes, i bought that just d prove d dfi is partly faulty), w/ 1.25v i still can't get it run on 2.8GHz prime stable. more tweaks needed but i'm not so optimistic. still arguin w/ d dfi distro as they're not willin to change a new board for me. now w/ biostar it's proven that there's nothing wrong w/ my x-fire 3850s.

This post has been edited by ah_khoo: Feb 3 2009, 11:50 AM

CnQ?

CnQ and Spread Spectrum are disabled

bios updated to the latest?

yes, bios is the latest

cpu-z screeny?

aiya, now at office no screenie. but even with screenie, juz imagine a stock 9550 with 1.3V. but goes 2.2GHz only.

can u try to use aod to oc in windows to check whether u'll be able to raise d htt?

i cant even auto clock using aod... dunno y...

Aiyoooo 0816 & 0836 are gud mine is not meh? Huhuhuhu

u'll get bsod if use AOD to raise d htt?

it's d board bro...

0836 more on 9950 iirc.

This post has been edited by ah_khoo: Feb 3 2009, 12:05 PM

Bwerkkkk pigi daaaa, u always blame the board
Hmmmmm kinda worried these few days, i'm gettin the feelin that someting wrong with my ram's..
Last night did memtest it failed at 2000% or sumthin.. Haihhhhhh